混炼试验的潘恩效应和分散率对比(二)

正(接上期)4.1.6 EPDM图20示出了三元乙丙橡胶(EPDM)具有类似于丁基橡胶(IIR)的对炭黑弱的亲和力。就像混炼丁基橡胶(IIR)填充胶那样,所看到的EPDM填充胶的G′潘恩效应曲线都很接近,这点EPDM与IIR很相似,均缺乏与炭黑的亲和     

Comparison of modeling methods for wind power prediction: a critical study

Prediction of power generation of a wind turbine is crucial, which calls for accurate and reliable models. In this work, six different models have been developed based on wind power equation, concept of power curve, response surface methodology (RSM) and artificial neural network (ANN), and the results have been compared. To develop the models based on the concept of power curve, the manufacturer’s power curve, and to develop RSM as well as ANN models, the data collected from supervisory control and data acquisition (SCADA) of a 1.5 MW turbine have been used. In addition to wind speed, the air density, blade pitch angle, rotor speed and wind direction have been considered as input variables for RSM and ANN models. Proper selection of input variables and capability of ANN to map input-output relationships have resulted in an accurate model for wind power prediction in comparison to other methods.     

Soft landing of runaway currents by ohmic field in J-TEXT tokamak

Recently, experimental studies on the soft landing of RE current by ohmic (OH) field have been performed in J-TEXT tokamak, as a possible auxiliary method to dissipate the RE current. With optimized horizontal displacement control of the RE beam, the toroidal electric field has been scanned from 1.6 to - 0.3 V m ^-1 during the RE plateau phase. The growth rate of RE currents and the evolution of hard x-ray (HXR) emissions have been studied. It is found that when the toroidal electric field is less than 7–12 times the theoretical critical electric field, the decay of REs could be achieved. The dissipation rate by the ohmic field can reach a maximum value of 3 MA s^-1.Furthermore, the results of HXR spectra analysis indicate the different behaviors of HXR emissions under the condition of different toroidal electric fields. The analysis of the ionized argon emissions and magnetic fluctuations shows that under the condition of different toroidal electric fields, the physical process of RE generation may be different.     

Grain refinement in low SFE and particle-containing nickel aluminium bronze during severe plastic deformation at elevated temperatures

The influence of particle size and morphology on grain refinement in low stacking fault energy(SFE)alloys was studied by comparing the grain structures in single-and multi-phase Al-bronze(AB)alloys following equal channel angular pressing(ECAP)between 350 and 500℃.In particular,nickel aluminium bronze(NAB)was chosen as it contained both coarse and fine rounded particles,as well as a lamellar phase which evolved during ECAP.Grain refinement in the single-phase alloy was achieved through dynamic recrystallisation initiated at deformed twin boundaries.By contrast,different mechanisms were observed in the particle-containing NAB.Recrystallisation around the coarse κⅡ particles(～5 μm)was promoted through particle stimulated nucleation(PSN),whereas recrystallisation in the region of the fine κⅣ(～0.4μm)was delayed due to the activation of secondary slip.Grain refinement in areas of the lamellar κⅢ showed significant variation,depending on the lamellar orientation relative to the shear plane of ECAP.As the lamellae deformed,numerous high angle grain boundaries were generated between fragments and served as nucleation sites for recrystallisation,while PSN occurred around spheroidised lamellae.The spreading of the κⅢ particles by ECAP then enhanced the total area of recrystallised grains.     

Dealloying corrosion of anodic and nanometric Mg41Nd5 in solid solution-treated Mg-3Nd-1Li-0.2Zn alloy

The microstructure and chemical compositions of the solid solution-treated Mg-3Nd-1Li-0.2Zn alloy were characterized using optical microscope,scanning electron microscope(SEM),transmission electron microscope(TEM),electron probe micro-analyzer(EPMA)and X-ray photoelectron spectroscopy(XPS).The corrosion behaviour of the alloy was investigated via electrochemical polarization,electrochemical impedance spectroscopy(EIS),hydrogen evolution test and scanning Kelvin probe(SKP).The results showed that the microstructure of the as-extruded Mg-3Nd-1Li-0.2Zn alloy contained α-Mg matrix and nanometric second phase Mg41 Nd5.The grain size of the alloy increased significantly with the increase in the heat-treatment duration,whereas the volume fraction of the second phase decreased after the solid solution treatment.The surface film was composed of oxides(Nd2O3,MgO,Li2O and ZnO)and carbonates(MgCO3 and Li2CO3),in addition to Nd.The as-extruded alloy exhibited the best corrosion resistance after an initial soaking of 10 min,whereas the alloy with 4h-solution-treatment possessed the lowest corrosion rate after a longer immersion(1 h).This can be attributed to the formation of Nd-containing oxide film on the alloys and a dense corrosion product layer.The dealloying corrosion of the second phase was related to the anodic Mg41Nd5 with a more negative Volta potential relative to α-Mg phase.The preferential corrosion of Mg41Nd5 is proven by in-situ observation and SEM.The solid solution treatment of Mg-3Nd-1Li-0.2Zn alloy led to a shift in corrosion type from pitting corrosion to uniform corrosion under long-term exposure.     

Reusable and durable electrostatic air filter based on hybrid metallized microfibers decorated with metal-organic-framework nanocrystals

As global air pollution becomes increasingly severe,various types of fibrous filters have been devel-oped to improve air filter performance.However,fibrous filters have limitations such as high packing density that generally causes high-pressure drop and ultimately deterioration in the filtration effi-ciency.High-pressure particulate matter precipitators are limited in terms of scope for commercialization because they require high voltage supplies and ozone generators.In this study,we develop fibrous fil-ters with enhanced durability and improved performance using metallized microfibers decorated with metal-organic-framework(MOF)nanocrystals.Not only does the efficiency of the developed filters remain at or above 97％for 0.50-1.5 μm PMs but the durability also significantly increases.In addi-tion,using the water purification ability of the MOF,we explore the dye degradation effect of the hybrid microfibers by immersing them into Rhodamine B aqueous solution.In such an experiment the Rho-damine B aqueous solution is completely purified by the presence of the hybrid microfibers under the UV irradiation.     

Applying reticular synthesis to the design of Cu-based MOFs with mechanically interlocked linkers

The concept of“robust dynamics”describes the incorporation of mechanically interlocked molecules(MIMs)into metal-organic framework(MOF)materials such that large amplitude motions(e.g.,rotation or translation of a macrocycle)can occur inside the free volume pore of the MOF.To aid in the preparation of such materials,reticular synthesis was used herein to design rigid molecular building blocks with predetermined ordered structures starting from the well-known MOF NOTT-101.New linkers were synthesized that have a T-shape,based on a triphenylene tetra-carboxylate strut,and their incorporation into Cu(II)-based MOFs was investigated.The single-crystal structures of three new MOFs,UWCM-12(fof),β-UWCM-13(loz),UWCM-14(lil),with naked T-shaped linkers were determined;β-UWCM-13 is the first reported example of the loz topology.A fourth MOF,UWDM-14(lil)is analogous to UWCM-14(lil)but contains a[2]rotaxane linker.Variable-temperature,²H solid-state NMR was used to probe the dynamics of a 24-membered macrocycle threaded onto the MOF skeleton.     

Nickel phosphonate MOF as efficient water splitting photocatalyst

A novel microporous two-dimensional(2D)Ni-based phosphonate metal-organic framework(MOF;denoted as IEF-13)has been successfully synthesized by a simple and green hydrothermal method and fully characterized using a combination of experimental and computational techniques.Structure resolution by single-crystal X-ray diffraction reveals that IEF-13 crystallizes in the triclinic space group Pi having bi-octahedra nickel nodes and a photo/electroactive tritopic phosphonate ligand.Remarkably,this material exhibits coordinatively unsaturated nickel(II)sites,free-P0₃H₂and-P0₃H acidic groups,a C0₂accessible microporosity,and an exceptional thermal and chemical stability.Further,its in-deep optoelectronic characterization evidences a photoresponse suitable for photocatalysis.In this sense,the photocatalytic activity for challenging H₂generation and overall water splitting in absence of any co-catalyst using UV-Vis irradiation and simulated sunlight has been evaluated,constituting the first report for a phosphonate-MOF photocatalyst.IEF-13 is able to produce up to 2,200 fimol of H₂per gram using methanol as sacrificial agent,exhibiting stability,maintaining its crystal structure and allowing its recycling.Even more,170μmol of H₂per gram were produced using IEF-13 as photocatalyst in the absence of any co-catalyst for the overall water splitting,being this reaction limited by the 0₂reduction.The present work opens new avenues for further optimization of the photocatalytic activity in this type of multifunctional materials.     

Flexible synthesis of high-purity plasmonic assemblies

The self-assembly of nanoparticles has attracted a vast amount of attention due to the ability of the nanostructure to control light at the sub-wavelength scale,along with consequent strong electromagnetic field enhancement.However,most approaches developed for the formation of discrete assemblies are limited to a single and homogeneous system,and incorporation of larger or asymmetrical nanoparticles into assemblies with high purity remains a key challenge.Here,a simple and versatile approach to assemble nanoparticles of different sizes,shapes,and materials into various discrete homo-or hetero-structures using only two complementary deoxyribonucleic acid(DNA)strands is presented.First,surface functionalisation using DNA and alkyl-polyethylene glycol(PEG)enables transformation of as-synthesised nanoparticles into readily usable plasmonic building blocks for self-assembly.Optimisation of the DNA coverage enables the production of different assembly types,such as homo-and hetero-dimers,trimers and tetramers and core-satellite structures,which are produced in high purity using electrophoresis purification.The approach is extended from purely plasmonic structures to incorporate(luminescent)semiconductor nanoparticles for formation of hybrid assemblies.The deposited assemblies form a high yield of specific geometrical arrangements,attributed to the van der Waals attraction between particles.This method will enable the development of new complex colloidal nanoassemblies for biological and optical applications.     

Erratum to: Suspended superconducting weak links from aerosol-synthesized single-walled carbon nanotubes

Erratum to Nano Research 2020,13(12):3433-3438 https://doi.org/101007/s12274-020-3032-1 The article“Suspended superconducting weak links from aerosol-synthesized single-walled carbon nanotubes"written by Jukka-Pekka Kaikkonen1(■),Abhilash Thanniyil Sebastian3,Patrik Laiho3,Nan Wei3,Marco Will-2,Yongping Liao3,Esko I.Kauppinen3,and Pertti J.Hakonen1,2(■),was originally published Online First without Open Access.