Effects of isothermal treatment parameters on the microstructure of semisolid alloys

Cold-rolled 6061 aluminium alloys are used to prepare semisolid billets by recrystallisation and partial melting. The effects of isothermal treatment parameters on the microstructures were investigated. The results indicated that the high isothermal holding temperature increases the experimental liquid fraction, average grain size and shape factor. A long isothermal holding time also increases the experimental liquid fraction and improves the spheroidisation degree of solid grains, but the average grain size also increases. Moreover, when the isothermal holding time at high temperature is increased, the size of intragranular liquid droplets increases, but their quantity decreases. The optimal isothermal holding temperature and time during semisolid isothermal treatment were 635°C and 5?–?10?min, respectively.     

单自由度八杆仿生机构构型与尺度同步设计方法

单自由度八杆仿生机构杆长参数较多，是仿生机器人领域研究的难点之一。为提高设计效率，提出一种构型与尺度同步设计方法。在选定的运动链和机架的基础上，以不等式形式分步给出运动可行性及外形约束条件，使得上一步的杆长可作为下一步求解的已知值。通过该过程，在得到八杆仿生机构构型的同时，快速得到所有杆长的初步可行域。循环上述过程，逐步缩小约束条件的范围，可使得八杆机构的杆长快速接近目标值。在此基础上，分类讨论了连杆搭接顺序、约束条件及基本运动链的差异对求解难度及构型结果的影响。利用所提出的单自由度八杆仿生机构的设计方法，在对初始条件进行合理选取的前提下，可在初步得到构型的同时将杆长限定在较小范围内，实现了构型与尺度的同步设计。该方法还可应用于其他单自由度机构的设计当中，具有较好的借鉴意义。     

含芳香氨基酸三肽及其衍生物自由基离子的形成和解离机理研究

铜-配体(L)-三肽组成的三元复合物［Cu(L)M］²⁺，其中，L表示4′-氯-2,2′:6′,2″-三联吡啶(缩写为4Cl-tpy)；M表示酪氨酰-甘氨酰-色氨酸(YGW)及其修饰型三肽(CH₃CO-YGW-OCH₃，缩写 Ac-YGW-OMe)。使用该复合物，通过碰撞诱导解离 (collision-induced dissociation, CID)产生两种自由基离子 (［YGW］^·+和［Ac-YGW-OMe］^·+)。采用串联质谱结合密度泛函理论 (density functional theory, DFT)得到气相稳定结构，并研究其气相解离行为。研究结果表明，［YGW］^·+和［Ac-YGW-OMe］^·+的气相解离行为截然不同，［YGW］^·+主要产生［M-CO₂-116］⁺和［M-CO₂］^·+碎片离子；而［Ac-YGW-OMe］^·+在气相中主要产生［M-CH₃OH］^·+碎片离子。推测这两种离子的气相裂解机理分别为：［YGW］^·+羧基上的质子重排到多肽骨架中羰基氧上，经历 C_α-C键的断裂产生［M-CO₂］^·+、断裂色氨酸侧链 C_β-C_γ键产生［M-CO₂-116］⁺离子；［Ac-YGW-OMe］^·+则先经历质子重排到酯基氧上，然后经过C-O酯键的断裂形成［M-CH₃OH］^·+离子。参与重排的质子可能有3个来源：Ac-YGW-OMe中甘氨酸的C_α-H、色氨酸的C_α-H 或C_β-H，该机理有待进一步验证。本研究将为其他类型多肽及衍生物的结构及气相反应机理研究提供参考。     

The microstructure evolution and mechanical properties of MgO-C refractories with recycling Si/SiC solid waste from photovoltaic industry

In the present work, the recycling of Si/SiC solid waste from photovoltaic industry for MgO-C refractories preparation has been introduced. The influence of solid waste powders as antioxidant additive on microstructure evolution, mechanical properties and thermal shock resistance of MgO-C refractories has been investigated systematically. With 4?wt% Si/SiC rich solid waste addition, the MgO-C refractories exhibited the highest strength (4.39?MPa) and residual Young's modulus (7.86?GPa) after firing at 1400?°C, compared to only Si or SiC-addition. The presence of iron in the solid waste also promoted the formation of MgO and Mg₂SiO₄ whiskers via catalyst-assisted method. Moreover, a dissolution-saturation-precipitation growth mechanism was used to explain the formation process of the whiskers. The improvements in strength as well as thermal shock resistance can be attributed to the microstructural evolution.     

Environmental Control of Triplet Emission in Donor–Bridge–Acceptor Organometallics

Carbene‐metal‐amides (CMAs) are a promising family of donor–bridge–acceptor molecular charge‐transfer (CT) emitters for organic light‐emitting diodes. A universal approach is demonstrated to tune the energy of their CT emission. A blueshift of up to 210 meV is achievable in solid state via dilution in a polar host matrix. The origin of this shift has two components: constraint of thermally‐activated triplet diffusion, and electrostatic interactions between guest and polar host. This allows the emission of mid‐green CMA archetypes to be tuned to sky blue without chemical modifications. Monte‐Carlo simulations based on a Marcus‐type transfer integral successfully reproduce the concentration‐ and temperature‐dependent triplet diffusion process, revealing a substantial shift in the ensemble density of states in polar hosts. In gold‐bridged CMAs, this shift does not lead to a significant change in luminescence lifetime, thermal activation energy, reorganization energy, or intersystem crossing rate. These discoveries offer new insight into coupling between the singlet and triplet manifolds in CMA materials, revealing a dominant interaction between states of CT character. The same approach is employed using materials which have been chemically modified to alter the energy of their CT state directly, shifting the emission of sky‐blue chromophores into the practical blue range.     

The cold sintering process: A review on processing features,densification mechanisms and perspectives

Since its first introduction in 2016, cold sintering process (CSP) has gained worldwide interest from the scientific community as green and innovative fabrication route due to the dramatic reduction of processing time, energy, and costs. Cold sintering resembles the geological formation of rocks where a ceramic powder is densified with the aid of a liquid phase under an intense external pressure and limited heating conditions (below 350 °C). Up to date, tens of different materials, including composites, have been successfully processed through CSP and extraordinary results in terms of densification, microstructure and final properties have been achieved. In the present review, processing features and variables, possible densification mechanisms and issues also for the realization of ceramic-based composites are explored. Advantages with respect to existing techniques are analysed and current challenges are described to lay the ground for new processing opportunities to be faced in the near future.     

基于阶段注意力机制的电力线提取算法

电力系统维护是电力系统稳定运行的重要保障，应用智能算法的无人机电力巡检则为电力系统维护提供便捷。电力线提取是自主电力巡检以及保障飞行器低空飞行安全的关键技术，结合深度学习理论进行电力线提取是电力巡检的重要突破点。本文将深度学习方法用于电力线提取任务，结合电力线图像特点嵌入改进的图像输入策略和注意力模块，提出一种基于阶段注意力机制的电力线提取模型（SA-Unet）。本文提出的SA-Unet模型编码阶段采用阶段输入融合策略（Stage input fusion strategy， SIFS），充分利用图像的多尺度信息减少空间位置信息丢失。解码阶段通过嵌入阶段注意力模块（Stage attention module，SAM）聚焦电力线特征，从大量信息中快速筛选出高价值信息。实验结果表明，该方法在复杂背景的多场景中具有良好的性能。     

Growth mechanism of primary Ti5Si3 phases in special brasses and their effect on wear resistance

In the present work, in-situ Ti₅Si₃ reinforced special brasses were prepared by melt reaction method. The synthesized Ti₅Si₃ phase shows various morphologies in brasses with different Ti₅Si₃ content, and the3 D morphological evolution of primary Ti₅Si₃and its growth mechanism were investigated. The Ti₅Si₃ crystal, which bears D8₈ hexagonal crystal structure, grows along <0001> direction and is revealed by{1010} faces during growth. With the increase of Ti₅Si₃ content in the brasses, the morphology of primary Ti₅Si₃significantly changes from fibers to hexagonal prisms to short-rods with hollow. In addition,the influence of Ti₅Si₃ volume fraction and morphology on the wear behavior of special brass was also revealed. It was substantiated that the wear resistance increases with the increasing volume fraction of Ti₅Si₃, and the corresponding wear mechanism changes from delamination to slight adhesive wear and abrasive wear. However, the friction coefficient shows an abnormal increase when most of the Ti₅Si₃ containing hollows appears in the brass. That is mainly due to the fact that the Ti₅Si₃ is easier to break and fall off resulted by the hollow as a crack source, which makes it unable to resist the plastic deformation of the contact surface during the sliding.     

Salt-assisted solution combustion synthesis of NiFe2O4: Effect of salt type

The effects of three types of salt including NaF, KCl, and NaCl on the properties of NiFe₂O₄ nanoparticles using salt-assisted solution combustion synthesis (SSCS) have been investigated. The synthesized powders were evaluated by SEM, TEM, FTIR, XRD, and VSM analysis. Also, the specific surface area (SSA), as well as size distribution and volume of the porosities of NiFe₂O₄ powders were determined by the BET apparatus. The visual observations showed that the intensity and time of combustion synthesis of nanoparticles have been severely influenced by the type of salt. The highest crystallinity was observed in the synthesized powder using NaCl. The SSA has also been correlated completely to the type of salt. The quantities of SSA was achieved about 91.62, 64.88, and 47.22 m²g^-1 for the powders synthesized by KCl, NaCl, and NaF respectively. Although the magnetic hysteresis loops showed the soft ferromagnetic behavior of the NiFe₂O₄ nanoparticles in all conditions, KCl salt could produce the particles with the least coercivity and remanent magnetization. Based on the present study, the salt type is a key parameter in the SSCS process for the preparation of spinel ferrites. Thermodynamic evaluation also showed that the melting point and heat capacity are important parameters for the proper selection of the salt.     

天然气水合物储层泥质细粉砂挡砂介质堵塞规律与微观挡砂机制

中国南海海域部分天然气水合物储层中地层砂为高泥质含量细粉砂，开采防控砂难度较大。针对高泥质细粉砂挡砂机制问题，使用粒度中值为10.13 μm的泥质细粉砂样品，模拟单向气液携砂流动条件，使用绕丝筛板、金属烧结网、金属纤维、预充填陶粒4类挡砂介质在20~80 μm挡砂精度下进行挡砂模拟实验，采用显微成像系统观察挡砂介质内部及表面砂粒沉积与堵塞动态，分析介质流通性能和挡砂性能变化，总结堵塞规律、微观挡砂机制与形态及其控制因素。研究结果表明，不同类型和精度的挡砂介质对泥质细粉砂的堵塞总体呈现堵塞开始、堵塞加剧和堵塞平衡3个阶段。随着驱替进行，挡砂介质渗透率逐渐降低，幅度会高达90%以上；同时过砂速度减缓，最终过砂率为5%~10%。根据堵塞规律和微观图像分析，提出了粗组分分选桥架、局部砂团适度挡砂、整体砂桥阻挡等挡砂介质对泥质细粉砂的3种微观挡砂机制。以粗组分分选桥架挡砂机制为主的挡砂工况下，挡砂介质堵塞渗透率较高，但过砂率超过15%，挡砂效果较差；以整体砂桥挡砂机制为主时，过砂率在10%以下，挡砂性能较好，但各类挡砂介质的堵塞渗透率不足1 D，流通性能较差。局部砂团适度挡砂机制为主时介质挡砂性能及流通性能介于两者之间。挡砂介质对天然气水合物储层泥质细粉砂的微观挡砂机制和形态受挡砂介质类型、精度、地层砂特征以及流动条件等因素控制，其规律对于水合物泥质细粉砂防控砂优化有指导意义。