综采工作面巷道内瓦斯分布规律研究

为了研究综采工作面巷道内瓦斯运移规律，摸清瓦斯流动的状态，采用理论分析、数值模拟和现场试验相结合的方法，理论分析得到了工作面风流特性及瓦斯运移规律，数值模拟得到了瓦斯异常释放后工作面瓦斯浓度分布变化情况及工作面正常工作瓦斯浓度分布，然后进行现场试验，试验结果和数值模拟结果相似。研究为工作面瓦斯治理提供了技术支持。     

Bimetallic CuCo2S4 Nanozymes with Enhanced Peroxidase Activity at Neutral pH for Combating Burn Infections

Peroxidase-mimicking nanozymes that can generate toxic hydroxyl radicals (^.OH) hold great promise as antibacterial alternatives. However, most of them display optimal performance under strongly acidic conditions (pH 3–4), and are thus not feasible for many medical uses, including burn infections with a wound pH close to neutral. Herein, we report a copper-based nanozyme (CuCo₂S₄) that exhibits intrinsic peroxidase-like activity and can convert H₂O₂ into ^.OH at neutral pH. In particular, bimetallic CuCo₂S₄ nanoparticles (NPs) exhibited enhanced peroxidase-like activity and antibacterial capacity, superior to that of the corresponding monometallic CuS and CoS NPs. The CuCo₂S₄ nanozymes possessed excellent ability to kill various bacteria, including methicillin-resistant Staphylococcus aureus (MRSA). Furthermore, this CuCo₂S₄ nanozymes could effectively disrupt MRSA biofilms in vitro and accelerate MRSA-infected burn healing in vivo. This work provides a new peroxidase mimic to combat bacteria in neutral pH milieu and this CuCo₂S₄ nanozyme could be a promising antibacterial agent for the treatment of burn infections.     

某铜矿重介质产品提铁降硫选矿试验

某铜矿重介质产品铁品位56.24%，硫含量高达9.34%，95.72%的硫以磁黄铁矿的形式存在。为获得硫含量<2%的铁精矿，按磨矿—弱磁选—浮选原则流程对该矿石进行了选矿试验。试验结果表明，在最佳试验参数下，重介质产品经一段磨矿（-0.043 mm 85%）—1粗1精弱磁选—1粗2扫脱硫浮选流程处理，可获得产率45.23%、硫含量为1.52%、全铁品位66.50%的铁精矿，可作为后续钢铁冶炼原料的配矿使用，为此类重介质产品的利用提供技术参考。     

河南省商城县观庙金多金属矿区地球化学异常特征*

结合1∶1万土壤地球化学测量成果，对商城县观庙金多金属矿区的元素分布特征、相关性及元素异常特征进行了研究，并根据矿区地质背景，圈定了化探综合异常20处，通过地表工程揭露，发现了Au矿（化）体，证明圈定的异常准确、有效，为地质工作提供了精准的找矿靶区。     

托盘式湿法烟气脱硫塔阻力特性研究

采用冷态物理模型结合商用CFD(Computational Fluid Dynamics)软件,对山东某火电厂300 MW机组配套托盘塔的流场和阻力特性进行了研究,取得了孔板阻力损失与液气比之间的二次函数关系。研究结果表明,塔内两相流场分布合理,入口处液滴受烟气的拖拽作用形成明显的干湿界面,负荷和液气比是影响脱硫塔阻力的重要因素。当液气比一定时,托盘上方能够维持相对稳定的持液层及鼓泡过程;满负荷运行时,脱硫塔阻力损失约为1600 Pa,其中孔板占1/4,持液层占3/4。拟合获得了托盘区阻力损失同液气比之间的关系,为托盘塔的应用、运行及优化提供了理论指导。     

基于龙格-库塔法自适应PID控制的太阳双轴跟踪系统

论述太阳光源双轴跟踪系统的工作原理,针对其控制系统中存在的时间滞后问题提出基于龙格-库塔法的自适应PID控制。并以基于直流电机的方位角传动机构为基础,建立方位角传动机构的数学模型,在MATLAB中进行仿真。仿真结果表明,基于龙格-库塔法的自适应PID控制系统响应速度快、稳定性高,具有较强的鲁棒性,能有效解决方位角传动系统中的时间滞后问题。     

Thermodynamic Analysis of Packed Bed Thermal Energy Storage System

A packed-bed thermal energy storage(PBTES) device, which is simultaneously restricted by thermal storage capacity and outlet temperatures of both cold and hot heat transfer fluids, is characterized by an unstable operation condition, and its calculation is complicated. To solve this problem, a steady thermodynamics model of PBTES with fixed temperatures on both ends was built. By using this model, the exergy destruction, thermocline thickness, thermal storage capacity, thermal storage time, and other key parameters can be calculated in a simple way. In addition, the model explained the internal reason for the change of thermocline thickness during thermal storage and release processes. Furthermore, the stable operation of the PBTES device was analyzed, and it was found that higher inlet temperature of hot air, and lower temperature difference between cold and hot air can produce less exergy destruction and achieve a larger cycle number of stable operation. The work can be employed as the basis of the design and engineering application of PBTES.     

某航改型燃气轮机特点及燃烧调整实践

本文以LM6000PD航改型燃气轮机为研究对象,详细介绍了干式低排放DLE(Dry Low Emission)燃烧室的结构特点及燃烧模式。以ABC燃烧模式为例,详细阐述了该模式下燃烧调整的基本过程,找出了该模式下平均火焰温度以及外、内环火焰温度的控制区间和运行曲线,确定了机组安全、稳定运行边界。并对调整试验期间NO_x、CO排放浓度以及动态压力波动P_(x36)的变化规律进行了分析。     

Structures and properties of chicken myofibrillar protein gel induced by microwave heating

Structures and properties of myofibrillar protein gel prepared at different power (300–800 W) were evaluated. Amino acid analysis demonstrated that changes in microwave power did not alter primary structure of gel. However, an increase in microwave power could change higher structures of gel. As microwave power increased, α-helix content decreased and β-sheet content increased. Increased microwave power probably facilitated protein to unfold and expose the internal groups, causing surface hydrophobicity and the formation of disulphide bonds were enhanced, which indicated changes in tertiary and quaternary structures of protein. At 500 W, gel had the best ultrastructure where surface morphology, springiness and water holding capacity reached the optimum. Our findings suggested that microwave at an appropriate power (500 W) could change higher structures of myofibrillar protein gel to achieve desired processing and quality protein gel characteristics.