双-β-萘甲酸多缩乙二醇酯在甲醇溶液中分子的构象和分子内激基缔合物的形成

本文研究了双-β-萘甲酸多缩乙二醇酯(P_n)在不同溶剂中的稳态和时间分辨荧光光谱。在甲醇中与在四氢呋喃中不同,P_n显示很强的激基缔合物荧光。表明在甲醇中疏水的两个末端发色团彼此靠近,亲水的多缩乙二醇链段包于两个发色团外部。热力学和动力学研究求出了P_n分子内激基缔合物形成的焓变是—20kJ/mol,活化能为～8.5kJ/mol,激基缔合物形成和离解的速度常数分别为4.5×10~8s~(-1)和3.1×10~8s~(-1)。     

Graft polymerization of acrylonitrile onto starch‐coated polyethylene film surfaces

Starch‐coated polyethylene (PE) films were prepared by immersing PE in a hot, jet cooked solution of starch. They were allowed to react with acrylonitrile (AN) in the presence of ceric ammonium nitrate initiator, and the graft polymerization that occurred produced starch‐g‐polyacrylonitrile (PAN) coatings that contained about 25 wt % grafted PAN. The starch‐g‐PAN coatings tightly adhered to the PE film surfaces. When grafted starch coatings were wetted with water and the surfaces vigorously rubbed, less than 20% of the coating was removed. The fact that PAN‐grafted coatings were not removed with boiling water provided further evidence for their strong adherence. When starch was removed from the coating by acid hydrolysis, the residual grafted PAN still remained adsorbed on the PE surface. Because the grafted coating was completely removed by treatment with refluxing 0.7N sodium hydroxide, there is apparently no chemical bonding between starch‐g‐PAN and PE. The dimensional changes associated with the evaporation of water from these PAN‐grafted coatings caused the films to curl during drying. Because the final shape of these coated films depends upon the presence or absence of water in the surrounding environment, these films may be considered to be a type of stimulus‐responsive polymer. Attempts to graft polymerize methyl methacrylate and methyl acrylate onto starch‐coated PE surfaces, under conditions similar to those used with AN, were unsuccessful. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3323–3328, 2003     

BCH催化剂在淤浆法HDPE装置上的应用

论述了国产ＢＣＨ高效催化剂在大庆１４万ｔ／ａ高密度惭烯（ＨＤＰＥ）装置上的工业应用，并根据应用情况。提出在原工艺设备不做改动的情况下适宜的操作条件，同时评价了ＢＣＨ催化剂的工业特性，文中指出，ＢＣＨ催化剂配制工艺简单、无污染、生产负荷达到并超过设计指生产的挤塑。箸吹中代表性牌号的产品质量全部达到国家标准和合同指标的要求，能满足后加工需要，而且生产成本降低，因而应用前景广阔。     

Pressure Fluctuation Analysis of Laboratory Scale Air/Polyethylene Fluidized Beds

Differential pressure fluctuations were studied along the wall of a laboratory scale column filled with a polyethylene resin. Air flow rates to the column were varied in order to examine the changes in wall pressure with respect to superficial gas velocity. Statistical and spectral analysis was used to study the periodic features of column wall pressure measurements in the dense region of a fluidized bed. From the analysis, it is evident that multiple flow regimes exist in the column. These flow regimes are dependent upon the height above the distributor. Results also show a significant peak developing at 1 Hz as superficial gas velocity increases.     

以聚醚链相连的萘甲酸酯-氨基吖啶体系的合成及分子内能量传递研究

本文分别用聚三乙二醇及聚四乙二醇柔性链将α萘甲酸与９氨基吖啶连接起来，合成了新型二元发色团分子体系，发现在两个体系中，选择性激发α萘甲酸酯，都可以发生从α萘甲酸酯到９氨基吖啶的高效率的单重态单重态能量转移，并讨论了溶剂极性对能量传递效率的影响．     

对羟基苯甲酸对HDPE结晶行为及力学性能的影响

采用DSC研究了对羟基苯甲酸(HBA)对高密度聚乙烯(HDPE)非等温结晶行为的影响。分析了HBA的引入对HDPE的结晶行为、晶片厚度分布、结晶度以及力学性能的影响。结果表明，当HBA用量为HDPE的0．5％-1．0％时可以促进HDPE的结晶，从而加快HDPE的结晶速度，提高HDPE的结晶度，降低片晶的平均厚度及其分布，并提高其力学性能。     

聚丙烯轿车专用料的光老化和光稳定

介绍了用于轿车保险杠的ＰＰ／ＰＥ／ＥＰＤＭ共混物的氙灯人工加速老化及户外暴露实验结果，分析了不同抗老化体系对ＰＰ／ＰＥ／ＥＰＤＭ共混物光老化后拉伸性能、冲击性能及外观变化的影响。     

Activation of bifunctional coupling agents in fiberglass/polyethylene composites by electron beam

Electron beam (EB) radiation was investigated as a means to initiate coupling between the fiberglass and plastic phases in fiberglass/polyethylene plastic composites using two bifunctional compounds, 12‐azido‐1‐diazo‐2‐dodecanone (A) and 1‐diazo‐17‐octadecene‐2‐one (B). Chemical studies reveal that EB radiation has the potential to bind both of these compounds to fiberglass. Fiberglass coated with either A or B shows reduced values of percentage recovery upon exposure to EB, indicating a reaction between these compounds and the glass surface. However, even 400 kGy of radiation was not as effective as a heat treatment for 45 min at 150°C. To test the effectiveness of EB radiation to couple these compounds to polyethylene, fiberglass samples were heat‐treated with compounds A and B, followed by extrusion mixing with polyethylene, and exposure of molded tensile and impact samples to EB radiation. Compound B showed the best overall ability to couple with the polyethylene matrix, but a 400‐kGy dose was necessary to bring about substantial coupling. At 400 kGy, samples containing B showed a 23% improvement in tensile properties and a 30% change in Izod impact. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2579–2594, 2002     

Bifunctional coupling agents for improved mechanical properties in fiberglass/polyethylene composites

Two bifunctional compounds, 12‐azido‐1‐diazo‐2‐dodecanone (A) and 1‐diazo‐17‐octadecene‐2‐one (B), show an ability to act as coupling agents in fiberglass/polyethylene composites. Under appropriate conditions the diazoketone functional groups in both A and B react with hydroxyl groups on a fiberglass surface, whereas the azide group in A and the alkene group in B form bonds with the plastic matrix during processing. FTIR and NMR spectroscopy were used to study the decomposition of each of these compounds under heat and UV light. Each treatment resulted in a relatively fast decomposition of the diazoketone functional group, along with a slower reaction of the azide and alkene groups. Thus it was possible to react the diazoketone end of these compounds with a fiberglass surface, without affecting the azide or alkene functional groups on the other ends of the molecules. In samples of treated fiberglass containing compounds A or B and mixed by extrusion with polyethylene, the mechanical properties of the composites had improved properties over composites containing untreated samples of fiberglass. With A as the coupling agent, both the tensile properties and Izod impact showed changes that indicated that a bifunctional bridge was formed between the fiberglass and polyethylene phases. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2562–2578, 2002     

Photooxidation and stabilization of photooxidized polyethylene and of its monopolymer blends

The increasing use of products from recycled polymers, or from blends with recycled polymers exposed to the outdoors, implies the need for good weathering resistance. This is particularly important when the recycled material comes, in turn, from products exposed during their lifetime to the sun. In this case the presence of C?O groups in the macromolecular chains strongly increases the photooxidative degradation kinetics of these secondary materials. In this work the change of the photooxidative degradation of blends of virgin and photooxidized polyethylene was evaluated as a function of the C?O content present in the material. As expected, the presence of the C?O groups strongly increases the photooxidation kinetics, as revealed by the increase of the carbonyl compounds, and by the decrease of the elongation at break. It was confirmed that the increase of C?O groups is dependent on the content of the same groups, whereas this is not true for the mechanical properties. The use of UV stabilizer strongly improves the weathering resistance of these materials, which become almost insensitive to the initial amount of C?O groups. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2244–2255, 2004