Long-term performance of a HDPE geomembrane stabilized with HALS in chlorinated water

A high density polyethylene geomembrane (GMB) stabilized with hindered amine (light) stabilizers (HALS or HAS) is immersed in four chlorinated water solutions with a simulated free chlorine concentration range of 0.5–5 ppm at five different temperatures (25, 40, 65, 75, and 85 °C) for 70 months. Standard and high pressure oxidative induction time (OIT) tests are performed to monitor antioxidants depletion while melt flow index, tensile, and stress crack resistance (SCR) tests are conducted to monitor degradation in physical and mechanical properties. Degradation in the GMB properties occurred shortly after immersion in chlorinated water at all temperatures except at 25 °C. Increasing the free chlorine concentration resulted in faster degradation of the tensile properties and SCR. The predicted time to nominal failure based on SCR ranges between 25 years at 40 °C and 5 years at 85 °C in chlorinated water (with 0.5 ppm free chlorine). A comparison between the degradation in SCR of this GMB and a GMB with a different resin and without HALS shows significant difference in their performance in chlorinated water but not in other incubation media.     

Self‐similarity analysis of vehicle driver's electrodermal activity

This paper characterizes stress levels via a self‐similarity analysis of the electrodermal activity (EDA) collected in a real‐world driving context. To characterize the EDA richness over scales, the fractional Brownian motion (FBM) process and its corresponding exponent H, estimated via a wavelet‐based approach, are used. Specifically, an automatic scale range selection is proposed in order to detect the linearity in a log scale diagram. The procedure is applied to the EDA signals, from the open database drivedb, originally captured on the foot and the hand of the drivers during a real‐world driving experiment, designed to evoke different levels of arousal and stress. The estimated Hurst exponent H offers a distinction in stress levels when driving in highway versus city, with a reference to restful state of minimal stress level. Specifically, the estimated H values tend to decrease when the driving environmental complexity increases. In addition, the estimated H values on the foot EDA signals allow a better characterization of the driving task than that of hand EDA. The self‐similarity analysis was applied to various physiological signals in literature but not to the EDA so far, a signal which was found to correlate most with human affect. The proposed analysis could be useful in real‐time monitoring of stress levels in urban driving spaces, among other applications.     

Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.     

Functions of ULK1 in autophagy and non-autophagy pathways and its implications in human physiology and disease

ULK1 (unc-51 like autophagy activating kinase 1), a mammalian serine/threonine kinase, is a key component of autophagy initiation complex and helps to induce all types of autophagy. Canonical autophagy is a process in which, through the interactions of a series of autophagy-related proteins, damaged organelles or misfolded proteins are engulfed by autophagosomes and then merged with lysosomes to be degraded. Thus, canonical autophagy is an important constituent part of the cellular “quality control.” Besides, accumulating evidence indicates that ULK1 exerts autophagy-independent effects in a cell-specific manner. For example, ULK1 facilitates neurite elongation through the regulation of endoplasmic reticulum (ER)–Golgi trafficking in neurons, stimulates phosphopentose pathway to help NADPH (nicotinamide adenine dinucleotide phosphate hydrogen) production, and acts as a duplex regulator in type I IFN (type I interferon) induced innate immune response. Considering the importance and diversity of ULK1 in various biological processes, this review aims to present a comprehensive overview of autophagy and non-autophagy related functions of ULK1 in a variety of human physiological, pathological, and disease processes.     

非连续采空区矿柱力学分析的数值模拟

为探讨非连续采空区矿柱力学原理，通过FLAC3D数值模拟技术，对下向水平分层进路式胶结充填采矿法开采形成的非连续采空区中矿柱的受力状态进行了分析。研究表明，非连续采空区中矿柱所受的力主要为覆岩的自重应力，水平应力对其影响不大；随着埋深的增加矿柱承受的垂直方向的力近似呈直线增加；随着非连续采空区跨度的增加（进路数量增加），非连续采空区受垂直方向的应力逐渐由围岩两侧向矿柱中间过渡。     

Material behavior of rubber sealing for proton exchange membrane fuel cells

Reliable sealing is necessary for the stable operation of proton exchange membrane fuel cell (PEMFC). In practical application, various materials have been tried in PEMFC sealing. However, the mechanical properties of these sealing materials, which play a key role in the sealing stability, have not been fully understood in PEMFC environment, especially after long-term operation. In this paper, according to the operating environment of PEMFC, sealing material experiments are carried out to explore the differences in mechanical behaviors of sealing materials, including silicone rubber (SR), fluororubber (FR), nitrile rubber (NBR) and ethylene-propylene-diene-terpolymer rubber (EPDM) and the variation of mechanical properties of these sealing materials is predicted as time goes on. The results indicate that compression rate has a great influence on sealing contact stress. SR and EPDM, with the variation of 0.15 MPa and 0.45 MPa in stress, show the best and worst mechanical stability at different compression rates, respectively. In terms of temperature, it is found that SR can adapt to different operating temperature of PEMFC and only 18% variation is found from 20 °C to 100 °C. Finally, based on Time-Temperature Superposition (TTS), high temperature experiments are conducted to predict long-term relaxation stress under PEMFC working condition. The analysis results are beneficial for choosing suitable sealing material, and it can also be applied to predict sealing ability in PEMFC.     

Using a pulsed electric current to reduce the susceptibility of high-strength steel to the stress corrosion cracking caused by hydrogen

Under the tensile loading, the damage of metals in the corrosive medium is the most destructive and harmful. In this study, the stress corrosion cracking behavior of H-charged high-strength steel in 3.5 wt% NaCl solution after electropulsing treatment was investigated. The experimental results from elongation, yield strength, fracture morphology, and polarization curves all demonstrate the positive effect of the pulsed processing, as it reduced the susceptibility of steel to stress corrosion cracking by removing hydrogen by electropulsing. The reduction in hydrogen content of the pulsed high–strength steels was attributed to electromigration and increased system free energy, which drove the hydrogen atoms in the steel to de–trap and reduced the susceptibility to stress corrosion cracking.     

二维反三角超混沌系统及其在图像加密上的应用

为了进一步提高混沌系统的混沌特性，为图像加密算法提供更可靠的混沌系统，增强图像加密算法的安全性，提出了一种基于二维反三角超混沌系统的新型图像加密算法。首先，在一维三角混沌函数的基础上构建了一个二维反三角超混沌系统，通过分岔图和Lyapunov指数等仿真实验，验证了该系统具有更广的混沌区间和更强随机性的迭代序列，遍历性更加优秀；然后，基于此混沌系统，采用"置乱-扩散"策略，根据不同密钥生成的不同超混沌序列，对图像矩阵进行无重复置乱和循环移位扩散，循环三次得到密文，完成加密过程；最后，对图像加密方案进行了直方图分析、密钥空间分析、相邻像素相关性分析、明文敏感性分析和信息熵分析等性能测试。其中密文图像的相关指标参数像素变化率（NPCR）和统一平均变化强度（UACI）的测试值非常接近于它们的理想期望值，信息熵的测试结果约为7.997，也非常接近于理想期望值8。实验结果表明，此图像加密系统具有更可靠的安全性，抵抗攻击能力强，在图像安全领域具有较好的应用前景。     

Comparison of stress evolution under TGO growth simulated by two different methods in thermal barrier coatings

The growth of thermally grown oxide (TGO) is a significant factor affecting the failure mechanism of thermal barrier coatings (TBCs) during cyclic high temperature service. In this work, a complicated finite element model with two semicircles reflecting the undulation of TGO interfaces was proposed, and four representative shapes of TGO interfaces were selected. There are mainly two methods to simulate TGO growth under high temperature, and each method was achieved by implementation of user subroutines in finite element method. A total of 100 thermal cycle loads were applied to the TBCs continuously. The stress evolution in the layers of Top Ceramic Coating (TC) and Bond Coating (BC) at the end of each thermal cycle load was obtained, the influence of TGO growth on stress evolution was analyzed, the differences between two methods of TGO growth were discussed. The results show that under TGO growth simulated by the first method, the stress distribution in the y direction does not change in both TC and BC layer, and the maximum stress decreases a lot in TC layer but nearly remains the same in BC. When the growth of TGO was simulated by the second method, stress evolution is complex and undergoes up to five stages with a small undulation or convex of TGO interfaces. Stress evolution in BC layer remains as the same as in the first method. Moreover, the maximum stress increases continually in BC layer. The comparison of these two simulation method would help to study the failure of TBCs caused by TGO growth.