Novel silicon-contained lignin-based carbon fibers derived from bamboo pulping black liquor with improved electrochemical performance for supercapacitors

Carbon fibers (CFs) are a promising candidate as electrode materials for flexible supercapacitors given its light weight and moderate cost. In this study, the lignin used was partially separated from kraft bamboo pulping black liquor and the higher molecular weight fraction, unavoidably contains a small amount of silicon compounds, so named silicon-contained lignin. Novel CFs were prepared using commercial polyacrylonitrile (PAN) and the lignin by electrospinning and further carbonization. Even in the presence of silicon compounds, the fibrous morphology of precursor fibers was significantly good, and the CFs with uniform fiber diameter and high specific surface area up to 182 m²/g were obtained with an increase in silicon-contained lignin. The CFs fabricated from silicon-contained lignin and commercial PAN had higher specific capacitance (22.20 mF/cm² at 10 mA/cm²) and superb cycling stability (94.21%) than that from silicon-free lignin or pure PAN separately.     

Unique CNTs-chained Li4Ti5O12 nanoparticles as excellent high rate anode materials for Li-ion capacitors

Composite anode materials with a unique architecture of carbon nanotubes (CNTs)-chained spinel lithium titanate (Li₄Ti₅O₁₂, LTO) nanoparticles are prepared for lithium ion capacitors (LICs). The CNTs networks derived from commercial conductive slurry not only bring out a steric hindrance effect to restrict the growth of Li₄Ti₅O₁₂ particles but greatly enhance the electronic conductivity of the CNTs/LTO composites, both have contributed to the excellent rate capability and cycle stability. The capacity retention at 30 C (1 C = 175 mA g^?1) is as high as 89.7% of that at 0.2 C with a CNTs content of 11 wt%. Meanwhile, there is not any capacity degradation after 500 cycles at 5 C. The LIC assembled with activated carbon (AC) cathode and such a CNTs/LTO composite anode displays excellent energy storage properties, including a high energy density of 35 Wh kg^?1 at 7434 W kg^?1, and a high capacity retention of 87.8% after 2200 cycles at 1 A g^?1. These electrochemical performances outperform the reported data achieved on other LTO anode-based LICs. Considering the facile and scalable preparation process proposed herein, the CNTs/LTO composites can be very potential anode materials for hybrid capacitors towards high power-energy outputs.     

Effects of sintering temperature and Bi2O3, Y2O3 and MgO co-doping on the dielectric properties of X8R BaTiO3-based ceramics

Bi₂O₃, Y₂O₃ and MgO co-doped BaTiO₃ (BT)-based X8R ceramics were synthesized successfully for the first time. The effects of the sintering temperature and Bi₂O₃, Y₂O₃ and MgO dopants on the dielectric properties were investigated systematically. Bi₂O₃ doping can increase the Curie temperature (T_c), but reduces the overall dielectric permittivity. On the other hand, Y₂O₃ doping is beneficial to the formation of core-shell microstructure and the increase of T_c, whereas MgO can prevent excessive Y₂O₃ from diffusing into grain core, and thereby further contributes to the generation of the core–shell microstructure. The generation of the typical core-shell microstructure was confirmed and investigated in detail by using transmission electron microscopy (TEM). It is argued that the synergistic effects of Bi₂O₃, Y₂O₃ and MgO co-doping in terms of the formation of the core-shell structure and the increase of T_c, can help improve the temperature stability of the dielectric permittivity effectively. Increasing the sintering temperature leads to an increase in the grain size, which in turn leads to an increase in the overall dielectric permittivity due to the grain size effect.     

Generalised multivariable supertwisting algorithm

The purpose of this paper is to present an extension of the generalised supertwisting algorithm (STA) to the multivariable framework. We begin by introducing an algorithm that may be deemed as a linear, quasicontinuous, or discontinuous multivariable system, depending on the functions that define them. For the class represented by such an algorithm we prove the robust, Lyapunov stability of the origin and characterise the perturbations that preserve its stability. In particular, when its vector field is discontinuous or quasicontinuous our algorithm is endowed with finite‐time stability. Due to its resemblance to the scalar case, we denote such finite‐time stable systems as generalised multivariable STA. Furthermore, the class of finite‐time stable systems comprise the currently available versions of STAs. To finalise, by means of simulation examples, we show that our proposed finite‐time stable algorithms are well suited for signals online differentiation and highlight their dynamical traits.     

一类Hilfer型分数阶微分方程解的存在和唯一性

用Banach不动点定理和上下解方法研究了α(1<α <2)阶数和β(0≤β ≤1)类型Hilfer分数阶微分方程的解,给出了方程解的存在和唯一性,并通过例证验证了本文所得结果的有效性.     

基于双面组件的可调支架光伏发电系统仿真研究

以双面光伏组件和可调支架系统为基础,以青海格尔木为模拟地点,利用PVsyst光伏仿真软件,分析了不同调节次数的可调支架系统与固定支架系统在组件正面和背面辐射量、系统发电量、系统收益的差异。研究结果表明：通过调节支架改变光伏组件的角度后,组件最低点离地高度也在变化,直接影响组件正面和背面的辐射接收;光伏方阵前后间距影响土地利用率（GCR）,土地利用率降低后,背面的辐射量和系统发电量都有一定的增加;相对于固定支架双面发电系统,可调支架双面系统在不同调节次数下的组件背面全年辐射量均有一定降低,但整体的发电量得益于正面辐射的增益,最高可达4.8%左右;技术和经济比较结果显示,双面组件采用可调支架系统,每年2次的调节方式,25年生命周期内系统收益最高。文章还分析了单面发电组件和双面组件系统使用可调支架的经济性对比,在相同的调节次数下,双面组件系统的增益明显高于单面组件系统。本文的研究成果对可调支架双面组件发电系统的设计具指导作用。     

Design of energy‐efficient train speed profiles considering fixed‐block signaling system

In dense traffic railway networks, trains may often slow down or stop between stations owing to previous train delays. If preceding train trajectory can be predicted, energy‐efficient driving can be achieved by suppressing unnecessary speed changes. In this paper, we propose an algorithm to find energy‐efficient driving considering fixed‐block signaling (FBS) system by using dynamic programming (DP). DP is suitable for use because it can optimize the control inputs with discrete and state constraints. In this paper, we discuss energy‐efficient driving by considering a FBS system using some case studies of simulation. In the simulation, we examine a technique to drive an express train in an energy‐efficient way when the preceding local train is running toward the station with passing loops. The results show that the proposed method can derive complex speed profiles for energy‐efficient driving and the train can be operated with a maximum reduced energy consumption of 8.3%.     

定距螺旋桨对船用主机外特性的要求分析

为解决定距螺旋桨与船用主机在船舶运行工况的机桨匹配问题,结合船舶系泊和航行试验的相关标准,分析和归纳船舶运行数据,将实船测试与船机桨匹配理论计算相结合,得出运输船和拖轮在常用工况及特殊工况下定距螺旋桨对主机外特性的定量要求,为配套不同细分市场时船用主机的优化和开发提供参考依据。     

含铜废水预处理设施脱氮升级改造工程

为了减轻太湖保护区范围内企业处理废水的负担,苏州白荡污水处理厂利用其含铜废水预处理设施的富余处理能力处理某公司产生的含氮废水。针对含氮废水高NO3^--N和低碳氮比等特点,在充分利用原处理设施的基础上,采用"A/O+固定床生物膜工艺+高效脱氮填料+乙酸钠碳源+内回流"组合工艺对含铜废水预处理设施进行脱氮升级改造。改造后实际运行结果表明,设施运行稳定,出水水质达到出水水质达到设计出水要求,TN和NH4^+-N的去除率分别达到85.4%和82.3%,Cu的去除率提高了17.6%。     

Stabilizing temperature-capacitance dependence of (Sr,Pb, Bi)TiO3-Bi4Ti3O12 solutions for energy storage

(1-x)Sr_0.7Pb_0.15Bi_0.1TiO₃-xBi₄Ti₃O₁₂ ((1-x)SPBT-xBIT, x = 0-0.125) bulk ceramics were developed and calcined via the solid-state method, aimed at the application of pulsed power capacitors. The phase structures, temperature stability, hysteresis loop, and discharge properties were systematically investigated. Considering both the temperature stability and dielectric properties, 0.925SPBT-0.075BIT bulk ceramics with a capacitance variation satisfying the X7R specification were developed for pulsed power capacitors. The energy storage density was 0.252 J/cm³, and the ceramics showed high temperature stability at 80 kV/cm. The discharge current waveforms of the 0.925SPBT-0.075BIT ceramics were recorded. A high discharge power density of approximately 1.01 × 10⁸ W/kg with an 8 Ω load resistor and short discharge period of 84 ns were achieved at 50 kV/cm. The good temperature stability properties and high power density show that the 0.925SPBT-0.075BIT ceramics are well suited for pulsed power capacitors with a wide temperature range.