A novel multi-objective optimization method: Input values effect on responses (IVER)

In this study, a novel multi-objective optimization method based on the best effect of unique input (independent variable) values on responses (dependent variables) was proposed. The proposed method was compared with optimization using Derringer & Suich function that is still the most used. The comparison was made using the response values measured in real experiments and available in the literature. The advantages of the proposed method such as not needing the polynomial model aiming to predict the response values, no parameter selection problem, being able to offer optimum range instead of single optimum value, being suitable for use with existing experimental designs and being simple and interpretable were demonstrated as a result of comparison. It was also suggested how the proposed method will be effective according to experimental designs, and application for the users' application was presented.     

差分准对立学习多目标蚁狮算法

为解决多目标优化问题，对经典的蚁狮算法进行改进，提出了基于差分进化的准对立学习多目标蚁狮算法（DEQOMALO）。该算法针对蚁狮算法易陷入局部最优的不足，一方面，该算法引用差分进化的思想，充分利用种群和精英蚁狮的信息对原算法中蚂蚁个体的位置更新方式进行改进；另一方面采用反向学习策略对蚂蚁种群进行优化，将原种群个体和其准对立个体进行混合并择优作为新的种群，大大增加种群的多样性。选取典型的标准测试函数，将提出的算法与原始蚁狮算法以及其他传统进化策略优化的蚁狮算法进行比较。实验结果表明，改进算法在收敛性和分布性上均有很大程度的提升，在解决双目标优化问题上具有较好的鲁棒性和有效性。     

基于混合蚁群算法的异质车队低碳VRP研究

针对货运车辆在配送调度过程中产生大量碳排放的问题，建立模型将多种影响碳排放量的因素协同优化。模型中考虑了不同载重量的异质车队，两个节点之间有多条道路的柔性路径，以及车辆重量随卸货而减少的动态负载等因素，以碳排放量、行驶时间和行驶路程为优化目标，并加入了节点需求时间窗、根据速度变化划分路段、交接和卸货时间的约束。提出了一种混合蚁群算法，利用蚁群算法信息素强度更新方式保持群体记忆性，利用粒子群算法的快速收敛特性增加计算效率。通过随机数值算例的仿真优化与对比分析，验证了算法和模型的有效性。     

An improved iterative stochastic multi-objective acceptability analysis method for robust alternative selection in new product development

Alternative selection in new product development (NPD) is a multi-criteria decision-making (MCDM) problem. It usually starts with incomplete, imprecise or even partially missing information. Currently, most existing methods in dealing with this problem cannot work well if required information is incomplete or missing. It is acknowledged that stochastic multi-objective acceptability analysis (SMAA) can be applied to address MCDM problem with incomplete preference information and uncertain criteria measurements. In SMAA, alternatives are evaluated based on SMAA measurements (acceptability index, central weight vector and confidence factor). The discriminability of SMAA for the optimum alternative heavily depends on differences of SMAA measurements among different alternatives. Usually, a large number of alternatives and high level of uncertainty are involved in alternative selection in NPD. In this situation, the differences among SMAA measurements are not obvious, and therefore SMAA cannot deal with such problem very well. To this end, this paper proposes an improved SMAA method called Iterative-SMAA (I-SMAA) for alternative selection in NPD. In the I-SMAA, an iterative multi-step decision-making process is suggested to improve differences of SMAA measurements among different alternatives, and thus assist decision makers (DMs) to positively discern from the most preferred alternative. To enhance the decision-making efficiency, sensitive criteria are acquired in each iteration by ranking sensitivity analysis. DMs are guided to provide partial preference information and give more accurate criteria measurements for sensitive criteria rather than all criteria. Eventually, to verify the proposed method, a numerical example of the existing literature is solved with the method, and the results are compared. And then, a practical example of a preparation equipment for coal samples is further employed to verify the practicability of the proposed I-SMAA.     

红外菲涅尔透镜的注射超声辅助成型优化

为了提升聚合物红外菲涅尔透镜的光学性能,以其表面微沟槽的成型质量为目标,提出了一种高效的注射超声辅助成型方法,并对工艺参数进行了综合质量优化。首先分析了超声振动对聚合物的加热和加压效应,设计了一套一模两腔的对比试验模具;接着以红外菲涅尔透镜的调制传递函数MTF和齿形平均高度h为优化质量目标,设计了四步骤的多目标优化流程,通过试验设计、基于BP神经网络的质量目标与注射工艺参数关系建模、基于NSGA-Ⅱ的多目标优化和试验验证进行工艺参数的综合优化。实验结果表明:该多目标优化流程具有很高的精度,MTF和h的平均预测误差MPE分别为4.16%和3.32%;注射超声辅助成型的菲涅尔透镜微沟槽具有更高的复制质量,其齿沟槽平均高度h增加了15.6%,且h值的波动量随着h值的增大而增大,MTF值受齿高h均匀性的影响大于齿高h对其的影响。     

Parallel Multipopulation Differential Evolutionary Particle Swarm Optimization for Voltage and Reactive Power Control

This paper presents parallel multipopulation differential evolutionary particle swarm optimization (DEEPSO) for voltage and reactive power control (VQC). The problem can be formulated as a mixed integer nonlinear optimization problem and various evolutionary computation techniques have been applied to the problem including PSO, differential evolution (DE), and DEEPSO. Since VQC is one of the online controls, speed‐up of computation is required. Moreover, there is still room for improvement in solution quality. This paper applies parallel multipopulation DEEPSO in order to speed up the calculation and improve solution quality. The proposed method is applied to IEEE 30, 57, and 118 bus systems. The results indicate that the proposed method can realize fast computation and minimize more active power losses than the conventional evolutionary computation techniques.     

绿色住区参数化优化设计平台的开发进展与展望

绿色住区设计是建设宜居城市和实现节能减排目标的重要手段与方法。文章首先回顾绿色住区参数化优化设计方法及平台概况，在此基础上，重点介绍平面生成、噪声计算、通风计算、可视度计算等新增功能和天空遮挡算法升级，以及广州市的工程应用，最后展望平台研发与应用的未来发展方向。     

[成形过程仿真优化与集成计算材料工程]限定加热管布局的快速热循环注塑成形模具电加热系统优化

针对管道布局、最大允许能耗给定条件下快速热循环注塑成形（RHCM）注塑模具型腔表面快速均匀加热的问题，提出以单根加热棒热流密度为设计变量，以模具型腔表面升温效率和温度分布均匀性为目标，结合有限元模拟、响应面设计以及多目标粒子群优化技术来优化RHCM模具电加热系统。与优化前相比，加热系统优化后，模具型腔表面最大温差降低63.4%，加热系统总能耗降低9%。对比了不同注塑成形工艺条件下成形的平板塑件表面质量，结果表明，相对传统注塑成形（CIM）工艺，RHCM工艺将制品表面粗糙度Ra从320 nm降低到118 nm，并有效抑制了制品表面熔接痕、缩痕等缺陷；发现制品表面粗糙度与型腔表面对应点温度成负相关，说明优化后的型腔表面温度分布更有利于提升制品表面质量。     

基于改进蚁群算法的三维路径规划

针对移动机器人在海水环境中的三维路径规划问题容易陷入局部最优和收敛慢等瑕疵，根据三维环境全局信息来改进蚁群算法以提高实时性和收敛速度。改进蚁群算法的启发函数，采用局部信息和全局信息结合动态地改进信息素更新方式，以及根据三维空间中路径的平坦程度和光滑度二阶微分分别增加了一阶微分和二阶微分来再次修改信息素更新规则。仿真对比实验结果显示改进后的蚁群算法克服了收敛速度慢、容易陷入局部最优的缺点。     

基于区间犹豫模糊语言集的水资源多目标决策

以鄂北水资源配置工程为对象,研究大型调水工程背景下的多水源多目标优化配置。将鄂北地区水库分为充蓄水库、补偿水库与在线水库等3类,根据各类水库特点对鄂北水资源配置工程进行系统概化,建立以年缺水量最小和调水成本最低为目标函数的多水源多目标优化配置模型。采用权重系数法进行求解得到非劣解集。最后采用基于区间犹豫模糊语言与TOPSIS的多目标决策方法对各方案的缺水量与调水量作出评价并遴选出最优方案。研究结果表明:对鄂北水资源配置工程而言,缺水量与调水量的权重比为7∶3的方案综合评价最优,重视缺水的同时兼顾调水成本;基于区间犹豫模糊语言集与TOPSIS的水资源多目标决策方法经本文实例验证具有较高的稳定性与可行性。