Good dielectric performance and broadband dielectric polarization in Ag,Nb co-doped TiO2

Due to the demand of miniaturization and integration for ceramic capacitors in electronic components market, TiO₂-based ceramics with colossal permittivity has become a research hotspot in recent years. In this work, we report that Ag⁺/Nb⁵⁺ co-doped (Ag_1/4Nb_3/4)_xTi_1−xO₂ (ANTOx) ceramics with colossal permittivity over a wide frequency and temperature range were successfully prepared by a traditional solid–state method. Notably, compositions of ANTO0.005 and ANTO0.01 respectively exhibit both low dielectric loss (0.040 and 0.050 at 1 kHz), high dielectric permittivity (9.2 × 10³ and 1.6 × 10⁴ at 1 kHz), and good thermal stability, which satisfy the requirements for the temperature range of application of X9R and X8R ceramic capacitors, respectively. The origin of the dielectric behavior was attributed to five dielectric relaxation phenomena, i.e., localized carriers' hopping, electron–pinned defect–dipoles, interfacial polarization, and oxygen vacancies ionization and diffusion, as suggested by dielectric temperature spectra and valence state analysis via XPS; wherein, electron-pinned defect–dipoles and internal barrier layer capacitance are believed to be the main causes for the giant dielectric permittivity in ANTOx ceramics.     

Study of pass band resonance characteristics of aperture type FSS

In this paper, the resonance characteristics of aperture type frequency selective surface (FSS) is presented. A systematic investigation is carried out to design the compact FSS. The optimized structure consists of rectangular Archimedean spiral with inter-digital capacitance. Resonance characteristics is verified in both single-layer as well as the double-layer approach by embedding FSS on one side of the dielectric substrate. The performances of the dual-layer are observed by varying air-gap between two FSS layers. The structure offers satisfactory resonance (transmission and reflection) characteristics at optimum air-gap of 7 mm between two layers with the 3 dB cutoff region over a frequency range (3.66–4.66 GHz). Finally, an array of 31 × 31 FSS elements of two layers is fabricated for experimental characterization. A close agreement between simulated and measured results is observed.     

A low power and low phase-noise 91~96 GHz VCO in 90 nm CMOS

This paper reports a 94 GHz CMOS voltage-controlled oscillator (VCO) using both the negative capacitance (NC) technique and series-peaking output power and phase noise (PN) enhancement technique. NC is achieved by adding two variable LC networks to the source nodes of the active circuit of the VCO. NMOSFET varicaps are adopted as the required capacitors of the LC networks. In comparison with the conventional one, the proposed active circuit substantially decreases the input capacitance (C_in) to zero or even a negative value. This leads to operation (or oscillation) frequency (OF) increase and tuning range (TR) enhancement of the VCO. The VCO dissipates 8.3 mW at 1 V supply. The measured TR of the VCO is 91~96 GHz, close to the simulated (92.1~96.7 GHz) and the calculated one (92.2~98.2 GHz). In addition, at 1 MHz offset from 95.16 GHz, the VCO attains an excellent PN of – 98.3 dBc/Hz. This leads to a figure-of-merit (FOM) of ?188.5 dBc/Hz, a remarkable result for a V- or W-band CMOS VCO. The chip size of the VCO is 0.75 × 0.42 mm², i.e. 0.315 mm².     

正电子湮没研究Al、Nb共掺CaCu3Ti4O12陶瓷高介电常数机理

关于CaCu₃Ti₄O₁₂陶瓷的高介电常数机理，目前广泛接受的是非本征的内阻挡层电容模型。该模型认为在多晶中元素变价、缺陷和非化学计量比等导致的半导化晶粒被绝缘晶界层，即内阻挡层所包围。其中内阻挡层的厚度对材料的介电性能影响较大，而扫描电子显微镜（SEM）测试表明样品晶界呈稀烂的果酱状，SEM难以测量晶界区域绝缘内阻挡层厚度。本文采用正电子湮没技术表征其厚度，通过对CaCu₃Ti₄O₁₂陶瓷共掺不同浓度的Al、Nb（CaCu₃Ti_4-xAl_0.5xNb_0.5xO₁₂，x=0.2%、0.5%、5.0%）改变其晶粒和晶界的微观结构，研究CaCu₃Ti₄O₁₂陶瓷高介电常数机理。正电子湮没结果显示，掺杂样品符合多普勒展宽谱S参数的变化趋势与平均寿命的变化趋势一致。x=0.5%掺杂样品的介电常数最高，其平均寿命、S参数和湮没长寿命成分均最小，阻挡层最薄。实验结果验证了描述CaCu₃Ti₄O₁₂陶瓷高介电常数机理的内阻挡层电容模型的预测。     

Influence of anode current density on carbon parasitic reactions during electrolysis

In the electro-deoxidation process, carbon parasitic reaction (CO₃^2- + 4e^-=C + 3O^2-) usually occurs when using carbon materials as the anode, which leads to increase of the carbon content in the final metal and decrease of the current efficiency of the process. The aim of this work is to reduce the negative effect of carbon parasitic reaction on the electrolysis process by adjusting anode current density. The results indicate that lower graphite anode area can achieve higher current density, which is helpful to increase the nucleation site of CO₂ bubbles. Most of CO₂ would be released from the anode instead of dissolution in the molten CaCl₂ and reacting with O^2- to form CO₃^2-, thus decreasing the carbon parasitic reaction of the process. Furthermore, the results of the compared experiments show that when the anode area decreases from 172.78 to 4.99 cm², CO₂ concentration in the released gases increases significantly, the carbon mass content in the final metal product decreased from 1.09% to 0.13%, and the current efficiency increased from 6.65% to 36.50%. This study determined a suitable anode current density range for reducing carbon parasitic reaction and provides a valuable reference for the selection of the anode in the electrolysis process.     

MIMO Channel Capacity and Configuration Selection for Switched Parasitic Antennas

Multiple-input multiple-output (MIMO) systems offer significant enhancements in terms of their data rate and channel capacity compared to traditional systems. However, correlation degrades the system performance and imposes practical limits on the number of antennas that can be incorporated into portable wireless devices. The use of switched parasitic antennas (SPAs) is a possible solution, especially where it is difficult to obtain sufficient signal decorrelation by conventional means. The covariance matrix represents the correlation present in the propagation channel, and has significant impact on the MIMO channel capacity. The results of this work demonstrate a significant improvement in the MIMO channel capacity by using SPA with the knowledge of the covariance matrix for all pattern configurations. By employing the “water-pouring algorithm” to modify the covariance matrix, the channel capacity is significantly improved compared to traditional systems, which spread transmit power uniformly across all the antennas. A condition number is also proposed as a selection metric to select the optimal pattern configuration for MIMO-SPAs.     

Improving hydrogen evolution reaction and capacitive properties on CoS/MoS2 decorated carbon fibers

We report a facile method to transform abundantly dumped banana stem fibers into carbon fibers (CFs) useful for energy applications. The CFs surface area is increased by varying the quantity of KOH activation to 488 m²g^-1. The solvothermal method is used to synthesize CoS, CoS/MoS₂ and also grown on the activated carbon fibers (ACFs). Nano nodules of CoS arranged into sheets and layers of MoS₂ stacked together were found in FESEM analysis. The morphology of the CoS/MoS₂ differs when grown on ACFs. The growth of CoS/MoS₂ along the ACFs length prevents any stacking of the pseudocapacitance materials. The ternary composite ACFs/CoS/MoS₂ exhibits superior supercapacitor behavior as well as hydrogen evolution reaction (HER) due to the synergetic effect of the conducting ACF surface and redox active CoS/MoS₂. A maximum specific capacitance of 733 Fg^-1, energy and power density of 33 WhKg⁻¹ and 999 WKg^-1 respectively are obtained. A low Tafel slope value of 61 mVdec⁻¹ is obtained for the ACFs/CoS/MoS₂ ternary composite electrode. The present work therefore offers a fresh insight into the effective conversion of waste materials into electrode material for energy storage and conversion applications.     

High-density oxygen-enriched graphene hydrogels for symmetric supercapacitors with ultrahigh gravimetric and volumetric performance

The contradiction between the porous structure and density of graphene materials makes it unable to meet the dual requirements of the next generation supercapacitors for gravimetric capacitance and volumetric capacitance. Herein, we successfully synthesized high-density oxygen-enriched graphene hydrogels (HOGHs) by a one-step hydrothermal method using high concentration graphene oxide (GO) solution and trometamol as precursors. The as-prepared HOGHs samples present a dense 3D network structure and moderate specific surface areas, which leads to a high packing density. In addition, the HOGHs samples also contain abundant oxygen-containing functional groups and some nitrogen-containing functional groups. These heteroatomic functional groups can provide pseudocapacitance for the electrode materials. Therefore, the HOGH-140 based symmetric supercapacitor shows ultrahigh gravimetric and volumetric specific capacitance (325.7 F g⁻¹, 377.8 F cm⁻³), excellent rate performance and cycling stability. Simultaneously, the symmetric binder-free supercapacitor exhibits high gravimetric specific energy density (11.3 Wh kg⁻¹) and volumetric specific energy density (13.1 Wh L⁻¹) in 6 M KOH, respectively. These outstanding properties make the material have a good application prospect in the field of compact energy storage devices.     

Nitrogen-doped hierarchically porous carbon obtained via single step method for high performance supercapacitors

In the present work, nitrogen doped hierarchically activated porous carbon (APC) samples have been synthesized via single step scalable method using ethylene di-amine tetra acetic acid (EDTA) as precursor and KOH as activating agent. Activated porous carbons with different pore sizes have been developed by varying the activation temperature. SEM, TEM and SAXS analysis suggest that with variation of activation temperature, a hierarchical porous structure with interconnected meso-pore and micro pores has been achieved. The sufficiently high surface area of the synthesized materials provides active sites to enhance the diffusion of ions between the electrolyte and the carbon electrodes. The electrode prepared at 800 °C activated sample exhibited highest specific capacitance of 274 Fg^-1 in two electrode setup, at a current density of 0.1 Ag^-1 in 1 M aqueous H₂SO₄. Along with this, it showed maximum energy density of 9.5 Whkg^?1 at a power density of 64.5 Wkg^-1. The remarkable electrochemical performance reveals that the synthesized nitrogen doped activated carbon electrodes derived from EDTA can be tuned to have optimum pore structure and pore size distribution for better electrochemical performance, so it can be considered as a potential electrode material for applications in electrochemical energy storage.     

Ti3C2Tx-foam as free-standing electrode for supercapacitor with improved electrochemical performance

To prevent restacking of the Ti₃C₂T_x layers, the Ti₃C₂T_x-foam has been successfully synthesized through thermal treatment of Ti₃C₂T_x-film with the hydrazine monohydrate. The interconnected porous structure of Ti₃C₂T_x-foam could effectively reduce the restacking of the Ti₃C₂T_x sheets and shorten the diffusion path of ions and accelerate the intercalation/de-intercalation of ions. The Ti₃C₂T_x-foam-80 used as free-standing electrode achieves a high areal capacitance of 271.2 mF/cm² (122.7?F/g) at a scan rate of 5?mV/s in 1?M KOH electrolyte. It also exhibited a high capability rate of 65.5% from 5?mV/s to 100?mV/s and good cycle life with 88.7% retention of its initial after 10,000 cycles at a scan rate of 50?mV/s.