Study on ice-melting performance of gradient gas diffusion layer in proton exchange membrane fuel cell

In this study, a three-dimensional model was established using the lattice Boltzmann method (LBM) to study the internal ice melting process of the gas diffusion layer (GDL) of the proton exchange membrane fuel cell (PEMFC). The single-point second-order curved boundary condition was adopted. The effects of GDL carbon fiber number, growth slope of the number of carbon fibers and carbon fiber diameter on ice melting were studied. The results were revealed that the temperature in the middle and lower part of the gradient distribution GDL is significantly higher than that of the no-gradient GDL. With the increase of the growth slope of the number of carbon fiber, the temperature and melting rate gradually increase, and the position of the solid-liquid interface gradually decreases. The decrease in the number of carbon fibers has a similar effect as the increase in the growth slope of the number of carbon fibers. In addition, as the diameter of the carbon fiber increases, the position of the solid-liquid interface gradually decreases first and then increases.     

非径向管板焊接接头的超声检测

对AP1000压水堆核电站安全壳贯穿件的非径向管板焊接接头结构特点进行了介绍,并分析其超声检测工艺的重点和难点。通过建立统一的缺陷定位坐标系并结合被检构件的几何特点进行综合分析,推导得出了h值(缺陷回波最高点距套管外壁的距离)的计算方法。为超声检测对这类焊接接头缺陷的准确识别和定位提供了行之有效的方法,为解决这类焊接接头的超声检测技术受限区提供了行之有效的措施。     

Optimal Design of Novel Electromagnetic-Ring Active Balancing Actuator with Radial Excitation

Imbalance vibration is a typical failure mode of rotational machines and has significant negative effects on the effii-ciency,accuracy,and service life of equipment.To automatically reduce the imbalance vibration during the opera-tional process,different types of active balancing actuators have been designed and widely applied in actual produc-tion.However,the existing electromagnetic-ring active balancing actuator is designed based on an axial excitation structure which can cause structural instability and has low electromagnetic driving efficiency.In this paper,a novel radial excitation structure and the working principle of an electromagnetic-ring active balancing actuator with a combined driving strategy are presented in detail.Then,based on a finite element model,the performance param-eters of the actuator are analyzed,and reasonable design parameters are obtained.Self-locking torque measurements and comparative static and dynamic experiments are performed to validate the self-locking torque and driving effi-ciency of the actuator.The results indicate that this novel active balancing actuator has sufficient self-locking torque,achieves normal step rotation at 2000 r/min,and reduces the driving voltage by 12.5％.The proposed novel balancing actuator using radial excitation and a combination of permanent magnets and soft-iron blocks has improved electro-magnetic efficiency and a more stable and compact structure.     

Challenges and new methods for designing reliability experiments

Abstract

Engineers use reliability experiments to determine the factors that drive product reliability, build robust products, and predict reliability under use conditions. This article uses recent testing of a howitzer to illustrate the challenges in designing reliability experiments for complex, repairable systems. We review research in complex system reliability models, failure-time experiments, and experimental design principles. We highlight the need for reliability experiments that account for various intended uses and environments. We leverage lessons learned from current research and propose methods for designing an experiment for a complex, repairable system.     

基于特征选择和深度信念网络的文本情感分类算法

由于人类语言的复杂性，文本情感分类算法大多都存在因为冗余而造成的词汇量过大的问题。深度信念网络（DBN）通过学习输入语料中的有用信息以及它的几个隐藏层来解决这个问题。然而对于大型应用程序来说，DBN是一个耗时且计算代价昂贵的算法。针对这个问题，提出了一种半监督的情感分类算法，即基于特征选择和深度信念网络的文本情感分类算法（FSDBN）。首先使用特征选择方法（文档频率（DF）、信息增益（IG）、卡方统计（CHI）、互信息（MI））过滤掉一些不相关的特征从而使词汇表的复杂性降低；然后将特征选择的结果输入到DBN中，使得DBN的学习阶段更加高效。将所提算法应用到中文以及维吾尔语中，实验结果表明在酒店评论数据集上，FSDBN在准确率方面比DBN提高了1.6%，在训练时间上比DBN缩短一半。     

Predicting hydrogen adsorption and desorption rates in cylindrical metal hydride beds: Empirical correlations and machine learning

A major limitation in chemisorptive hydrogen storage in metal hydrides is the long time required for the adsorption reaction during charging. This study investigates how the shape and material of the reaction chamber influences the adsorption and desorption rates. Numerical simulations of hydrogen storage in a cylindrical reaction chamber filled with LaNi₅ hydride are conducted for a range of chamber thermal conductivities and aspect ratios. The results show that adsorption and desorption processes are limited by thermal diffusion in the hydride bed and storage chamber. A storage efficiency is proposed based on an ideal isothermal process and used to evaluate the impact of chamber thermal conductivity and aspect ratio on the adsorption and desorption rates. Empirical correlations are proposed for predicting the adsorption and desorption efficiency of cylindrical LaNi₅ hydride beds. Finally, a machine-learning based data model for predicting storage efficiency in metal hydride chambers is presented. Comparison against the empirical correlations highlights that the machine learning-based data model can predict the storage efficiency more accurately.     

Effect of fiber orientation on Liquid–Gas flow in the gas diffusion layer of a polymer electrolyte membrane fuel cell

In this study, the lattice Boltzmann method was used to simulate the three-dimensional intrusion process of liquid water in the gas diffusion layer (GDL) of a polymer electrolyte membrane fuel cell (PEMFC). The GDL was reconstructed by the stochastic method and used to investigate fiber orientation's influence on liquid water transport in the GDL of a PEMFC. The fiber orientation can be described by the angle between a single fiber and the in-plane direction; three different samples were simulated for three different fiber orientation ranges. The simulated permeability correlated well with the anisotropic characteristics of reconstructed carbon papers. It was concluded that the fiber orientation had a significant effect on the liquid invasion pattern in the GDL by changing the pore shape and distribution of the GDL. The results indicated that the stochastically reconstructed GDL, taking into account the fiber orientation, better demonstrates the mass transport properties of the GDL.     

A combination of near-infrared hyperspectral imaging with two-dimensional correlation analysis for monitoring the content of biogenic amines in mutton

The study investigated the feasibility of using a combination of near-infrared hyperspectral imaging (NIR-HSI) with two-dimensional correlation (2DCOS) analysis for rapid and non-destructive determination of the content of biogenic amines in mutton during refrigerated storage. Total contents of biogenic amines (TBA) were used as the perturbation. By analysing the synchronous and asynchronous two-dimensional correlation spectra, sensitive variables that were closely related to TBA contents were obtained. The results showed that the wavelengths in the spectra range of 1002–1335 nm were the research area for the detection of TBA contents in mutton. The least-squares support vector machines (LSSVM) model based on effective wavelengths selected by competitive adaptive reweighted sampling (CARS) from 2DCOS analysis showed excellent results, with correlation coefficient in prediction (Rp) of 0.91, root mean square error in prediction (RMSEP) of 1.67 mg kg⁻¹ and the ratio of performance deviation (RPD) of 2.76. The research demonstrated that the combination of NIR-HSI and 2DCOS could be used as an effective method for monitoring the content of biogenic amines in mutton.     

悬浮于润滑油中的颗粒运动分析及其对油膜压力的影响

对含有固体颗粒的局部润滑流域建立格子Boltzmann(LBM)离散模型,分析固体颗粒在润滑油中的动力学特性;考虑颗粒形状的影响,推导计入单个固体颗粒运动的润滑方程,并分析得到油膜压力;将油膜流动特性与颗粒动力学计算相结合,分析不同形状的颗粒运动对于油膜压力的影响。分析发现,当颗粒进入润滑油后,经过很短的瞬时颗粒就会达到一个瞬态稳定的状态,无论颗粒在油膜厚度方向的初始位置位于两壁面之间的中线上侧还是下侧,颗粒都会向中线位置移动;当颗粒速度为0时对于油膜压力的影响较大,随着颗粒速度逐渐增大,颗粒对于油膜压力的影响逐渐减小;当颗粒的宽度在油膜厚度方向相同时,长宽比越大的颗粒对于油膜压力的影响也越大;当颗粒长轴相等时,颗粒在油膜厚度方向的宽度越大,则其对于油膜压力的影响也越大,即颗粒形状对于油膜流动的阻碍能力越强,则其对于油膜压力的影响越大。     

Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.