高深溜井井筒堵塞的爆破处理实践

溜井是采用平硐-溜井方式开拓矿山的运输咽喉,溜井正常与否对矿山生产影响极大。本文通过黑沟铁矿高深溜井井筒堵塞处理实例,对其堵塞爆破处理方法及经验做了系统分析。重点介绍的爆破冲击波破拱疏通高深溜井井筒高位堵塞的爆破方法,富有新意,可供国内外同类型矿山参考借鉴。     

Experimental and Numerical Investigation of a Novel Spiral Micromixer with Sinusoidal Channel Walls

A novel spiral micromixer with sinusoidal channel walls was designed to enhance the mixing index in the low to intermediate Reynolds number range (1 < Re < 100). To analyze the fluid flow, a set of numerical simulations were performed using the finite-difference method. The microchip was fabricated from polydimethylsiloxane, employing the soft-lithography technique. The degree of mixing was increased by 99.11 % when using the proposed micromixer, compared to 59.44 % for a simple spiral micromixer. The introduced microchannel drastically reduced the mixing length, increasing the mixing index of a 0.5-loop spiral-sinusoidal microchannel compared to that of the simple spiral microchannel with 1.5 loops. The mixing index of the 3-loop mixer was higher than that of the microchannel with 1.5 loops, and its pressure drop was increased.     

Depicting the role of gas-solid interactions on the hydrodynamics of converging pneumatic riser

The understanding of the flow characteristics and effect of gas-solid interactions in pneumatic risers is fundamental to investigate to ensure effective design cost-effective operation. Thus, to understand the effect of gas-solid interactions on the hydrodynamics of newly proposed conversing risers, this study mainly focused on predicting pressure drop in the dilute phase pneumatic conveying system. The experiments were conducted in a converging riser having a convergence angle of 0.2693°. Various solid particles such as sago, black mustard, and alumina have been considered to study the effect of particle sizes and density on the pressure drop. The experimental outcomes indicate that the total pressure drop increases with an increase in the solid density and gas mass flow rate. Moreover, smaller particle sizes are also increased the pressure drop. An empirical correlation is developed for the prediction of total pressure drop ΔP_T in converging pneumatic riser via dimensional analysis. All dependent variables such as particle and air density, drag force, acceleration due to gravity, the mass flow rate of air and particle, the diameter of particle and converging riser, the height of converging riser were considered to develop the empirical correlation. The established relationship is tested, and experimental data have been fitted for its validation. The estimated relative error of less than 0.05 proved the significance of the developed correlation. Hence, it can be stated that the established relationship is useful in studying the effects of various parameters on the pressure drop across the length of the conversing riser.     

Experimental study on prediction model of wet gas pressure drop across single-orifice plate in horizontal pipes in the low gas phase Froude number region

The pressure drop prediction of wet gas across single-orifice plate in horizontal pipes had been solved satisfactorily under an annular-mist flow in the upstream of orifice plates. However, this pressure drop prediction is still not clearly determined when the upstream is in an intermittent flow or stratified flow, which is corresponding to a region of low Fr_G (gas phase Froude number) in the flow pattern map of wet gases. In this study, the wet gas pressure drop across a single-orifice plate was experimentally investigated in the low Fr_G region. By the experiment, the flow pattern transition in the downstream of single-orifice plates, as well as the effects of Fr_G and Fr_L (liquid phase Froude number) on Φ_G (gas phase multiplier), were determined and compared when the upstream is in the flow pattern transition and the stratified flow region, respectively. Prediction performances were examined on the available pressure drop models. It was found that no model could be capable of jointly predicting the wet gas pressure drop in the low Fr_G region with an acceptable accuracy. With a new method of correlating Fr_G and Fr_L simultaneously, new correlations were proposed for the low Fr_G region. Among which the modified Chisholm model shows the best prediction accuracies, with the prediction deviations of Φ_G being within 7% and 3% when the upstream is in flow pattern transition and stratified flow region, respectively.     

An integrated model for analysing the effects of ultrasonic vibration on tool torque and thermal processes in friction stir welding

An integrated model of ultrasonic vibration enhanced friction stir welding (UVeFSW) is developed by integrating the thermal-fluid model with the ultrasonic field model and tool torque model. The tool torque and the heat generation rate at tool/workpiece contact interfaces are coupled with the interfacial temperature, strain rate and ultrasonic energy density. The model is used in quantitatively analysing the effects of ultrasonic vibration on tool torque and thermal processes in friction stir welding (FSW). The results show that ultrasonic vibration reduces the flow stress, which results in a decreasing of tool torque, interfacial heat generation rate and interfacial temperature. The complicated interaction of ultrasonic energy with the thermal processes in FSW leads to a gentle thermal gradient and an enhanced plastic material flow in UVeFSW. The model is validated by a comparison of the calculated thermal cycles and tool torque at various welding parameters with the experimentally measured ones.     

煤层顶板硬岩大直径定向钻孔施工关键技术

根据顶板高位定向钻孔快速钻进成孔与工作面卸压瓦斯高效抽采治理需要，针对现有螺杆马达定向钻进技术与分级扩孔方法存在的问题，开展了顶板硬岩定向钻进与大直径扩孔钻进关键技术研究，开发了冲击回转定向钻进技术、扭冲回转定向钻进技术、扭冲旋转扩孔技术以及双级双速扩孔技术等钻孔提速新技术，研制了冲击螺杆马达、矿用小直径扭力冲击器、双级双速螺杆马达、组合式扩孔钻头等配套钻具。综合试验结果表明，硬岩定向钻孔平均机械钻进效率达到8.34 m/h，最高达到13.6 m/h，较常规螺杆马达定向钻进技术提升20%~30%；硬岩大直径扩孔终孔直径达到200 mm，机械钻进效率平均达到5.6 m/h以上，最高达到10.5 m/h。该技术提升了顶板硬岩定向钻进效率与大直径扩孔钻进效率，缩短了顶板高位定向钻孔的综合施工周期，为大直径高位定向长钻孔快速成孔与高效抽采治理回采工作面卸压瓦斯提供了可靠的技术手段。     

水泵水轮机导叶动态水力矩特性分析

采用SST k-ω湍流模型对某高水头水泵水轮机进行全流道三维非定常数值模拟,分别对在水轮机工况和水泵工况运行下的导叶动态力矩特性进行分析。结果表明:在水轮机工况下,随着流量的增大,不同位置处导叶的动态水力矩变化规律一致,力矩值由正值变为负值,力矩脉动频率与转轮叶片数相关,流量越大,叶频影响越显著;在水泵工况下,最高扬程工况时导叶水力矩脉动频率主频为转频且脉动幅值较大,而最低扬程工况下导叶水力矩脉动主频为叶频,力矩脉动幅值较小。     

基于负荷预测的0.4 kV配网低电压风险评估方法

我国现阶段的配电网网架结构依然十分薄弱,智能化水平低,缺乏先进的检测技术和高效的运维模式。在现阶段低压电气信息不开源的情况下,为解决0.4 kV配网无差别运维效率低的问题,文章分析了适用于低压配网状态评估的评价维度,并基于负荷预测结果提出了低压台区低电压风险评估方法,引入了微增容量所引起的压降比,实现对低电压风险的定期管控。该文对于优化低压配电网运维资源配置、指导低压配网差异化运维模式的建立,以及提高低压配电网运维整治效率具有一定的参考价值。     

水位骤降对下伏隧道堤防安全影响研究

建立了考虑水位骤降条件下的下伏隧道堤防模型,依托湘江某下伏隧道堤防工程,基于堤防边坡渗流原理,结合有限元应力计算,探讨了不同水位骤降速率下的浸润线情况,计算了堤防安全系数。研究结果表明:湘江水位骤降速率越快,浸润线变化范围越大,浸润线变化范围与水位降落速率成正比;湘江水位骤降速度在3 m/d^4 m/d,水位降到28.8 m时,堤岸失去稳定;水位骤降并非整个过程中堤岸均处于失稳状态,而是水位降至某高度后堤岸失稳,骤降速率增快对堤防安全系数有一定负面作用。研究结果对隧道下穿堤防建设具有一定指导意义。     

搅拌式风力致热装置启动性能研究

搭建搅拌式风力致热试验台,以自制的2种致热器为研究对象,使其分别在3个不同平均角加速度24.92、14.66、8.04 rad/s2下启动。通过动态扭矩测试仪和数据采集仪测试记录致热器启动阶段的相关数据。结果表明:致热器启动时所需扭矩与角加速度的一次方、转速、叶片半径的二次方成正比,同时得出这些因素之间的关系式;满负荷时,启动扭矩会出现一个峰值,且角加速度越大峰值越大,自然风必须提供峰值以上的扭矩,否则装置无法启动。