基于多视图立体视觉的沙堆三维尺寸测量研究

利用从运动中恢复结构方法(SFM),提出了一种基于多视图立体视觉的沙堆三维重建及三维尺寸测量方法。首先根据SFM方法的求解不稳定特点,结合光束平差法对SFM求解过程进行分析及优化;其次针对SFM重建结果为稀疏点云的问题,利用基于面片的稠密重建算法重新生成稠密的三维点云,再利用泊松算法对密集点云进行三维曲面重建;最后获得模型的三维尺寸信息。对某建筑工地的沙堆进行了三维尺寸的测量实验,实验结果验证了该方法的有效及可行性,提高了重建能力及精度,同时考虑了目标实际测量误差与重建误差,能够满足实际智能测量的应用需求。     

A review on China's wind power accommodation in the background of “Internet+” strategy

The consumption of fossil fuel has resulted in global warming, environmental pollution, and many other crucial problems. Replacing fossil fuel with renewable energy has become an important issue over the recent decades. As a renewable clean energy, wind power is a relatively well‐developed and promising energy method for current technology development in China. Under the background of growing demand for electricity and enhancing awareness for environmental, the “Internet+ wind power” concept has emerged based on both the wind power's characteristics that renewable and non‐polluting, and the rapid development of the Internet in China. Through querying an amount of literature and information, this paper reveals the resource endowment and policy environment about wind power and energy Internet at first. Then, the PEST‐SWOT strategy analysis model is used to analyze the internalities (strengths and weaknesses) and the externalities (opportunities and threats) of “Internet+ wind power”. According to these results, the paper puts forward some measures (development and utilization, business mode) for wind power accommodation. Then some policy recommendations have been proposed. The government should provide favorable conditions for wind power grid with the “Internet+” technology innovation.     

Promoted electrocatalytic performance of palladium nanoparticles using doped-NiO supporting materials toward ethanol electro-oxidation in alkaline media

Electrocatalyst support materials play significant role in the performance, durability and commercialization of fuel cells. This research work describes the preparation of metal oxide (nickel oxide (NiO), cobalt (Co) and copper (Cu) doped NiO) support materials on meshed titanium (Ti) substrate via a simple electro-deposition method for their application as novel support material for palladium (Pd) catalyst. Field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) techniques are employed to study morphology, composition and structure of fabricated electrodes, respectively. The electrocatalytic performance of fabricated electrodes toward ethanol oxidation reaction (EOR) in alkaline solution is examined by the cyclic voltammetry (CV), chronoamperometry (CA) techniques. Low peak potential (−0.2 V), increased peak current density (62.54 mA cm⁻²) and large electrochemical active surface area (16.02 m² g⁻¹) were remarkable properties of Pd/Cu–NiO/Ti electrode. The results of other electrochemical measurements, CO-striping voltammetry, long-term stability and electrochemical impedance spectroscopy (EIS) revealed that the Pd/Cu–NiO/Ti electrode has the privileged electrocatalytic performance for EOR relative to other prepared electrodes. Accordingly, the Pd/Cu–NiO/Ti can be considered as a hopeful electrode for ethanol electro-oxidation reaction in DEFCs.     

Statistics of ceramic strength: Use ordinary Weibull distribution function or Weibull statistical fracture theory?

“Weibull statistics” for strength distribution analysis refers to either the ordinary Weibull distribution function or the Weibull statistical fracture theory. The ordinary Weibull distribution function is an empirical distribution function on an equal footing with other type of classical empirical distributions such as normal and log-normal distributions for fitting the statistical data of various random variables nonexclusive to materials strength. It has no explicit physical meaning and cannot be used for size scaling and prediction of strength. The Weibull statistical fracture theory is a weakest-link statistical fracture model for a solid with the strength distribution of an elemental volume being described by the ordinary Weibull distribution function. It has the capability of size scaling and prediction of strength for specimens with different geometries and different loading modes. The three-parameter Weibull statistical fracture theory in uniaxial flexure of prismatic beams is reformulated and validated by both numerical and real strength experiments of different ceramics.     

Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions

The proton exchange membrane (PEM) fuel cell is an ideal automotive power source with great potential, owing to its high efficiency and zero emissions. However, the durability and life-span limit its large-scale application. Complex automotive operating conditions significantly accelerate fuel cell aging, and result in diverse degradation mechanisms that require comprehensive understanding. This review focuses on three harsh conditions of open-circuit/idling, dynamic load, and startup-shutdown. In-situ and ex-situ accelerated stress tests (ASTs) for the three conditions are summarized in terms of methodology, research objectives, and conditions of application. Reversible decay may arise during ASTs and lead to an over-estimation of the aging state, of which the causes and recovery procedures are emphasized. The degradation mechanisms are elaborated systematically according to parameter characteristics, microstructure, and aging reactions. First, increased gas permeation and a high cathode potential during open-circuit/idling combine to intensify generation of free radicals that cause membrane degradation. Pt degradation and migration are also accelerated, characterized by increased Pt particle growth and precipitation in the membrane. The debate regarding the effect of Pt precipitation on membrane degradation is resolved based on a literature review. Second, dynamic load brings about changes in the thermal/humidity state, altered reactant demand, and potential cycling, which lead to mechanical degradation, gas starvation, and Pt particle growth, respectively. To account for the accelerated particle growth, electrochemical Ostwald ripening and increased Pt dissolution are reviewed. Third, an air/hydrogen boundary appears in the anode under startup-shutdown condition and causes carbon corrosion in the local cathode via the reverse current mechanism. The cathode thereby suffers from severe and non-uniform structural damage and even structural collapse, accompanied by Pt agglomeration and detachment. Meanwhile, difficulties in mass transfer arise because of ionomer redistribution, decreased porosity, and carbon surface hydrophilization. In addition, cold start produces severe damage to component structures. This paper seeks to guide further investigation into improved fuel cell durability via mechanism analysis, condition optimization, control strategy development, structural design of the membrane electrode assembly, and component material development.     

考虑多时间尺度电力交易市场下的配电网最大供电能力模型

为研究多时间尺度电力交易下配电网的最大供电能力,首先从中长期+现货交易模式入手,将多时间尺度下的交易转变为单时间尺度交易;其次,建立考虑多时间尺度电力交易市场下的配电网最大供电能力双层模型,并运用原始对偶内点法和改进的重复潮流算法求解;最后通过算例,对中长期+现货交易模式下的配电网最大供电能力进行计算分析。结果表明,考虑多尺度电力交易下的配电网最大供电能力得到了提升,且随着现货交易的深入,提升得越明显。研究成果可为电力市场环境下提升配电网最大供电能力提供参考。     

搅拌式风力致热装置启动性能研究

搭建搅拌式风力致热试验台,以自制的2种致热器为研究对象,使其分别在3个不同平均角加速度24.92、14.66、8.04 rad/s2下启动。通过动态扭矩测试仪和数据采集仪测试记录致热器启动阶段的相关数据。结果表明:致热器启动时所需扭矩与角加速度的一次方、转速、叶片半径的二次方成正比,同时得出这些因素之间的关系式;满负荷时,启动扭矩会出现一个峰值,且角加速度越大峰值越大,自然风必须提供峰值以上的扭矩,否则装置无法启动。     

Application of gamma-ray computed tomography for the analysis of gas holdup distributions in centrifugal pumps

In this work, gas–liquid distributions in an industrial centrifugal pump operated at various steady state conditions have been quantitatively determined. Therefore, high-resolution gamma-ray computed tomography (HireCT) has been applied, operated in time-averaging rotation-synchronized CT scanning mode. Detailed studies have been performed on a hydraulic test facility providing authentic operating conditions for industrial centrifugal pumps. The gas phase distribution in the centrifugal pump has been studied for swirling gas–liquid two-phase flow as an inlet flow regime and at defined inlet gas volumetric flow rates between 0% and 5%. In this way, the influence of the inlet flow boundary conditions on the performance of the centrifugal pump as well as the gas holdup distribution within the impeller region could be successfully determined.     

Performance improvement of conventional and inverted polymer solar cells with hydrophobic fluoropolymer as nonvolatile processing additive

The morphology of the photoactive layer critically affects the performance of the bulk heterojunction polymer solar cells (PSCs). To control the morphology, we introduced a hydrophobic fluoropolymer polyvinylidene fluoride (PVDF) as nonvolatile additive into the P3HT:PCBM active layer. The effect of PVDF on the surface and the bulk morphology were investigated by atomic force microscope and transmission electron microscopy, respectively. Through the repulsive interactions between the hydrophilic PCBM and the hydrophobic PVDF, much more uniform phase separation with good P3HT crystallinity is formed within the active layer, resulting enhanced light harvesting and improved photovoltaic performance in conventional devices. The PCE of the conventional device can improve from 2.40% to 3.07% with PVDF additive. The PVDF distribution within the active layer was investigated by secondary ion mass spectroscopy, confirming a bottom distribution of PVDF. Therefore, inverted device structure was designed, and the PCE can improve from 2.81% to 3.45% with PVDF additive. Our findings suggest that PVDF is a promising nonvolatile processing additive for high performance polymer solar cells.