基于压电陶瓷动态信息的结构裂纹识别方法

利用压电陶瓷的动态特性和压电系统的动态信息,对铝梁的裂纹损伤进行了分析研究。随着梁裂纹尺寸的增加,压电陶瓷片的导钠幅值下降,且系统固有频率减小。利用导钠幅值的变化和系统的动态信息,可以对裂纹的位置和尺寸大小进行识别。实验证明该方法的有效性。     

A multigrid accelerated hybrid unstructured mesh method for 3D compressible turbulent flow

 A cell vertex finite volume method for the solution of steady compressible turbulent flow problems on unstructured hybrid meshes of tetrahedra, prisms, pyramids and hexahedra is described. These hybrid meshes are constructed by firstly discretising the computational domain using tetrahedral elements and then by merging certain tetrahedra. A one equation turbulence model is employed and the solution of the steady flow equations is obtained by explicit relaxation. The solution process is accelerated by the addition of a multigrid method, in which the coarse meshes are generated by agglomeration, and by parallelisation. The approach is shown to be effective for the simulation of a number of 3D flows of current practical interest. Sponsored by The Research Council of Norway, project number 125676/410 Dedicated to the memory of Prof. Mike Crisfield, a respected colleague     

可倾瓦径向气体轴承在低温透平机械中的应用

可倾瓦径向动压气体轴承以其良好的稳定性和自对中能力在低湿透乎机械中获得了广泛的应用。对可倾瓦径向气体轴承的工作原理和在低湿透乎机械中的应用发展情况进行了综述。     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

桥梁颤振气动导数识别的迭代法

本文提出一种利用自由振动响应通过年顿－拉夫逊迭代同时识别出桥梁全部8个颤振气动导的方法。此法具有对迭代初值要求不高，识别结果稳定的特点，并具有一定的抗噪声干扰能力。数字仿真与实物试验结果表明本文方法有效，可行。     

Characteristics of a typical lifting symmetric supercritical airfoil

The theoretical aerodynamic characteristics of a typical lifting symmetric supercritical airfoil demonstrating its superiority over thenaca 0012 airfoil from which it was derived are presented in this paper. Further, limited experimental results confirming the theoretical inference are also presented. Invited Lecture given at the 3rd Asian Congress on Fluid Mechanics, held in Tokyo during 1–5 September, 1986     

水平轴风力机的几个关键气动问题探讨

水平轴风力机是最有效的风能转换装置之一 ,在世界各地得到了广泛的应用。本文讨论了在风力机的研究和开发过程中所遇到的几个关键气动问题 ,在分析这些问题产生原因的基础上 ,介绍了目前的研究现状和研究水平。本文并结合问题所涉及的基本理论 ,以及学科发展的趋势 ,提出了解决问题的基本方法 ,以及发展方向和近期可望达到的目标等     

劈刀和肋环夹持工况对超声键合换能系统电学特性的影响

通过实验分析了肋环夹持松紧度和劈刀存在两个因素对超声键合换能系统电学导纳特性的影响规律。对换能系统在悬挂有无劈刀和夹持8个松紧度等各个情况下进行谐振频率附近的导纳圆测量,确定换能系统等效电路各特征参数的变化情况。由实验结果的分析可知,劈刀的附加质量以及肋环松紧程度对换能系统谐振频率的影响不大,但劈刀的存在改变了换能系统的能量分布和耗散,是影响换能系统各特征参量的主要因素之一。这些结论有助于超声键合换能系统的优化。     

手征平板介质波导中的场分析

本文首次研究了手征平板介质波导中电磁波的传播特性,给出了波导中的场分布、色散关系和截止方程,以及最低截止波数Kc随手征导纳ζc的变化规律。结论表明,在手征平板介质波导中,TE、TM和TEM模均不能单独传输,其伸输模是耦合模。当ζc趋于零时,本文的所有结果均退化成通常平板介质波导情形。     

气体动压轴承动态参数测定原理

将气体动压轴压简化为转化气膜系统后，针对其动力特点，给出气膜在微幅振动下动压轴承的实用数学模型和测定动态参数的方法，并进行了测量误差的修正。