排序方式: 共有34条查询结果,搜索用时 15 毫秒
1.
2.
3.
4.
5.
多径路由在移动Ad hoc网络中的应用研究 总被引:1,自引:0,他引:1
在移动Ad hoc网中,多径路由因其能够更好地支持QoS而得到广泛的研究.从减少端到端延时、降低能耗、提高可靠度、有效利用链路带宽四个方面介绍多径路由在Ad hoc网中的应用.但是,现在大多数多径路由协议只考虑到网络层,而没有考虑到其它层和多径路由的相互关系,基于此,分析多径路由在链路层和传输层所面临的问题,并且提出解决这些问题的进一步的研究方法. 相似文献
6.
为了探究小麦粉溶剂保持力(solvent retention capacity,SRC)特性与挂面力学质地之间的相关性,选取品质性状差异较大的6 种小麦粉进行4 种SRC的测定,利用物性仪对其制作的挂面蒸煮前后力学质地进行测定。结果表明:乳酸溶液SRC与弹性模量、断裂位移、断裂应力、硬度、咀嚼性之间均呈显著或极显著正相关(r=0.84~0.92),与蒸煮损失率呈极显著负相关(r=-0.99);蔗糖溶液SRC与断裂应力、咀嚼性、蒸煮损失率之间均呈显著相关(r=0.84、0.82、-0.83);碳酸氢钠溶液SRC与内聚性、弹性、面条吸水率之间均呈显著或极显著相关(r=-0.87、-0.85、0.98);蒸馏水SRC与挂面品质指标之间相关性均不显著。SRC方法可以在一定程度上替代传统品质指标(蛋白质含量、湿面筋含量、十二烷基硫酸钠沉降值和破损淀粉含量)测定方法,有效预测挂面力学质地。 相似文献
7.
BCH码是一种获得广泛应用的能够纠正多个错码的循环码。介绍了BCH编码原理,基于FPGA,利用VHDL硬件描述语言实现了一个BCH(15,11)码编码器。给出了仿真结果。仿真结果表明,达到了预期的设计要求,并用于实际项目中。 相似文献
8.
随着分布式发电系统的发展,可再生能源并网呈现低密度和大规模的趋势,给电力系统带来了同步稳定性的挑战.为了研究在大规模分布式发电系统并网情况下的电力系统同步稳定性,本文以带节点负荷的非均匀大规模分布式发电系统为对象,首先结合下垂控制和Kuramoto模型推导了该系统的数学模型,并基于此模型推导出系统节点锁相的必要条件;然后利用?ojasiewicz不等式判断系统收敛到同步稳定点的速率.为了验证理论结果的有效性,基于实例低压配电网络构造出带有节点负荷的3种基本网络,并设计了一个低压微电网系统.仿真结果表明,星形网络同步稳定性最优,且同步结果与理论分析相符. 相似文献
10.
Paclitaxel(PTX) is an effective anticancer drug with poor solubility in water.Recently,much effort has been devoted into alternative formulations of PTX for improving its aqueous solubility.In this study,PTX and poly(L-lactic acid)(PLLA) were co-precipitated by a supercritical antisolvent(SAS) process using dichloromethane(DCM) and the mixtures of DCM/ethanol(EtOH) or DCM/dimethyl sulfoxide(DMSO) as the solvent,with super-critical carbon dioxide as the antisolvent.The effects of solvent,solvent ratio,temperature,pressure,polymer con-centration and solution flow rate on particle morphology,mass median diameter(Dp50) and PTX loading were in-vestigated using single-factor method.The particle samples were characterized using X-ray diffraction(XRD),scanning electron microscopy(SEM),laser diffraction particle size analyzer and high pressure liquid chromatogra-phy(HPLC).XRD results indicate that the micronized PTX is dispersed into the PLLA matrix in an amorphous form.SEM indicates that the solvent and the solvent ratio have great effect on the particle morphologies,and particle morphology is good at the volume ratio of DCM/EtOH of 50/50.For the mixed DCM/EtOH solvent,Dp50 increases with the increase of the temperature,pressure,PLLA concentration and solution flow rate,and PTX loading in-creases with pressure.Suitable operating conditions for the experimental system are as follows:DCM/EtOH 50/50(by volume),35 ℃,10-12 MPa,PLLA concentration of 5 g·L-1 and solution flow rate of 0.5 ml·min-1. 相似文献