Catalytic combustion synthesis of CNTs/MgO composite powders and the influences on the thermal shock resistance of low-carbon Al2O3–C refractories

Using MgC₂O₄, Mg powders as raw materials and Ni(NO₃)₂?6H₂O as a catalyst, CNTs/MgO composite powders were prepared by a catalytic combustion synthesis method. The CNTs/MgO composite powders were characterized by XRD, Raman spectroscopy, FESEM/EDS and HRTEM. The effects of catalyst content on the degree of graphitization and aspect ratio of the CNTs in composite powders were investigated. Moreover, the thermal shock resistance of low-carbon Al₂O₃–C refractories after adding the composite powder was investigated. The results indicated that the CNTs prepared with 1 wt% Ni(NO₃)₂?6H₂O addition had a higher degree of graphitization and aspect ratio. In particular, the aspect ratio could reach approximately 200. The growth mechanism of hollow bamboo-like CNTs in the composite powders was proven to be a V-L-S mechanism. The thermal shock resistance of Al₂O₃–C samples could be improved significantly after adding CNTs/MgO composite powders. In particular, compared with CM0, the residual strength ratio of Al₂O₃–C samples with added 2.5 wt% composite powders could be increased 63.9%.     

Unique CNTs-chained Li4Ti5O12 nanoparticles as excellent high rate anode materials for Li-ion capacitors

Composite anode materials with a unique architecture of carbon nanotubes (CNTs)-chained spinel lithium titanate (Li₄Ti₅O₁₂, LTO) nanoparticles are prepared for lithium ion capacitors (LICs). The CNTs networks derived from commercial conductive slurry not only bring out a steric hindrance effect to restrict the growth of Li₄Ti₅O₁₂ particles but greatly enhance the electronic conductivity of the CNTs/LTO composites, both have contributed to the excellent rate capability and cycle stability. The capacity retention at 30 C (1 C = 175 mA g^?1) is as high as 89.7% of that at 0.2 C with a CNTs content of 11 wt%. Meanwhile, there is not any capacity degradation after 500 cycles at 5 C. The LIC assembled with activated carbon (AC) cathode and such a CNTs/LTO composite anode displays excellent energy storage properties, including a high energy density of 35 Wh kg^?1 at 7434 W kg^?1, and a high capacity retention of 87.8% after 2200 cycles at 1 A g^?1. These electrochemical performances outperform the reported data achieved on other LTO anode-based LICs. Considering the facile and scalable preparation process proposed herein, the CNTs/LTO composites can be very potential anode materials for hybrid capacitors towards high power-energy outputs.     

Boosted hydrogen evolution activity from Sr doped ZnO/CNTs nanocomposite as visible light driven photocatalyst

CNTs were decorated onto Sr doped ZnO nanoparticles to construct an efficient photocatalyst via a facile sol-gel method. The as-fabricated Sr doped ZnO/CNTs with recyclability exhibits Sr and CNTs content dependent hydrogen evolution activit under visible light illumination. The Sr doped ZnO/CNTs photocatalyst shows the highest hydrogen evolution rate of 2732.2 μmolh^?1g^?1, which is 33.7 and 2.83 times higher than pure ZnO and Sr doped ZnO photocatalysts, respectively. The improved hydrogen evolution activity of Sr doped ZnO/CNTs is primarily assigned to high surface area, Sr doping and construction of heterojunction, which can extend the light absorption, decrease the optical band gap and improve the charge separation. Moreover, the underlying photocatalytic mechanism is proposed on the basis of Mott-Schottky study and explains the interfacial charge transfer process from ZnO to CNTs and Sr. This work open new strategies to synthesize CNTs based nanocomposite for hydrogen evolution.     

Numerical study of entropy generation in Darcy-Forchheimer (D-F) Bödewadt flow of CNTs

Three-dimensional Bödewadt flow (fluid rotates at a large enough distance from the stationary plate) of carbon nanomaterial is examined. Single walled and multi walled CNTs are dissolved in water and gasoline oil baseliquids. Darcy-Forchheimer porous medium is considered. Stationary disk is further stretched linearly in radial direction. Heat transfer effect is examined in presence of radiation and convection. Effect of viscous dissipation is accounted. Entropy generation rate is studied. By using adequate transformation (von Kármán relations), the flow field equations (PDEs) are transmitted into ODEs. Solutions to these ODEs are constructed via implementation of shooting method (bvp4c). In addition to Entropy generation rate, Bejan number, heat transfer rate (Nusselt number), skin friction and temperature of fluid are examined through involved physical parameters. Axial component of velocity intensifies with increment in nanoparticles volume fraction and ratio of stretching rate to angular velocity parameter while it decays with higher porosity parameter. Higher nanoparticles volume fraction and porosity parameter lead to decay in radial as well as tangential component of velocity. However it enhances with higher ratio of stretching rate to angular velocity parameter. Temperature of fluid directly varies with higher ratio of stretching rate to angular velocity parameter, radiation parameter, Eckert number, Biot number and nanoparticles volume fraction. Rate of Entropy generation is reduced with higher estimations of porosity parameter, nanoparticles volume fraction and radiation parameter. Skin friction coefficient decays with higher porosity parameter and ratio of stretching rate to angular velocity parameter. Intensification in porosity parameter, nanoparticles volume fraction and Biot number leads to higher Nusselt number. Prominent impact is shown by multiple-walled CNTs with gasoline oil basefluid than single-walled CNTs with water basefluid.     

CNT/g‐C3N4 photocatalysts with enhanced hydrogen evolution ability for water splitting based on a noncovalent interaction

Graphite carbon nitride (g‐C₃N₄) as a novel photocatalyst has attracted growing attention, but its photocatalytic efficiency should be further improved. Based on the large work function and fast electron conductivity of carbon nanotubes (CNTs), here CNT/g‐C₃N₄ photocatalysts with improved H₂ evolution ability and stable water splitting ability were synthesized. The improvement was attributed to the synergistic effect between CNTs and g‐C₃N₄. As for the mechanisms, CNTs strongly attracted photoelectrons and, because of excellent conductibility, rapidly transferred photoelectrons from the catalyst interface. Thereby, the photoelectron migration rate and the photogenerated charge separation and the use efficiency of photoelectrons in g‐C₃N₄ were improved, which largely enhanced the hydrogen production ability. Moreover, the addition of CNTs improved the service life and stability of g‐C₃N₄‐based photocatalytic H₂ production. After 10 hours of visible light irradiation, the maximum H₂ yield from the 12‐mg/L CNT/g‐C₃N₄ (CG12) was 138.7 times larger than that of g‐C₃N₄ (6548.4 vs 47.2 μmol/g), and the H₂ evolution rate was 138.7 times that of g‐C₃N₄ (654.8 vs 4.72 μmol/g/h). After 50 hours, the apparent quantum efficiency of CG12 was up to 37.9%, indicating that the addition of CNTs improved the photocatalytic splitting and stability of g‐C₃N₄. The mechanism of photocatalytic hydrogen production and the roles of CNTs in improving water splitting were discussed through characterization and activity experiments. It was found that the addition of CNTs accelerated the migration, separation, and utilization of photoelectrons and thereby significantly enhanced the photocatalytic performance.     

CNTs decorated with CoFeB as a dopant to remarkably improve the dehydrogenation/rehydrogenation performance and cyclic stability of MgH2

The chain-like carbon nanotubes (CNTs) decorated with CoFeB (CoFeB/CNTs) prepared by oxidation-reduction method is introduced into MgH₂ to facilitate its hydrogen storage performance. The addition of CoFeB/CNTs enables MgH₂ to start desorbing hydrogen at only 177 °C. Whereas pure MgH₂ starts hydrogen desorption at 310 °C. The dehydrogenation apparent activation energy of MgH₂ in CoFeB/CNTs doped-MgH₂ composite is only 83.2 kJ/mol, and this is about 59.5 kJ/mol lower than that of pure MgH₂. In addition, the completely dehydrogenated MgH₂−10 wt% CoFeB/CNTs sample can start to absorb hydrogen at only 30 °C. At 150 °C and 5 MPa H₂, the MgH₂ in CoFeB/CNTs doped-MgH₂ composite can absorb 6.2 wt% H₂ in 10 min. The cycling kinetics can remain rather stable up to 20 cycles, and the hydrogen storage capacity retention rate is 98.5%. The in situ formation of Co₃MgC, Fe, CoFe and B caused by the introduction of CoFeB/CNTs can provide active and nucleation sites for the dehydrogenation/rehydrogenation reactions of MgH₂. Moreover, CNTs can provide hydrogen diffusion pathways while also enhancing the thermal conductivity of the sample. All of these can facilitate the dehydrogenation/rehydrogenation performance and cyclic stability of MgH₂.     

Electrodes based on nano-tree-like vanadium nitride and carbon nanotubes for micro-supercapacitors

Vanadium nitride(VN) was deposited by DC-sputtering on a vertically aligned carbon nanotube(CNTs)template for the purpose of nano-structuration. This led to the fabrication of hierarchically composite electrodes consisting of porous and nanostructured VN grown on vertically aligned CNTs in a nano-treelike configuration for micro-supercapacitor application. The electrodes show excellent performance with an areal capacitance as high as 37.5 m F cm~(-2) at a scan rate of 2 mV s~(-1) in a 0.5 MK_2SO_4 mild electrolyte solution. Furthermore, the capacitance decay was only 15% after 20,000 consecutive cycles. Moreover,the capacitance was found to increase with VN deposit thickness. The X-ray photoelectron spectroscopy analyses of the electrodes before and after cycling suggest that the oxide layers that form at the VN surface is the responsible for the redox energy storage in this material. Such electrodes can compete with other transition metal nitride based electrodes for micro-supercapacitors.     

碳纳米管对Zr/KClO_4烟火剂的热行为和光辐射性能的影响

为了提高烟火固体激光器泵浦源Zr/KClO4的泵浦效率,在烟火剂Zr/KClO4中引入具有催化性能、高比表面积、强吸附能力、高强度的碳纳米管(CNTs),借助差热分析技术和光电探测技术研究了碳纳米管对泵浦源用烟火剂Zr/KClO4(60/40)的热分解和光辐射性能的影响。结果表明:CNTs的加入对Zr/KClO4的热分解特性和光辐射能均有显著的影响。随着CNTs添加量的增加,烟火剂的燃烧速率和放热量均逐渐增加,药剂的融化吸热峰减弱,甚至趋于消失,药剂的光辐射能量却呈现出先增加后降低的趋势。当CNTs含量为体系总质量的0.50%时,药剂总光辐射能达到了1830 J·g-1,其中分布在钕(Nd):钇铝石榴石(YAG)激光增益介质的三个强吸收带(590±10)nm,(750±10)nm和(808±10)nm内的有效光辐射能分别提高了41%,25%和31%。     

Dendrimer as nanocarrier for drug delivery

Dendrimers are novel three dimensional, hyperbranched globular nanopolymeric architectures. Attractive features like nanoscopic size, narrow polydispersity index, excellent control over molecular structure, availability of multiple functional groups at the periphery and cavities in the interior distinguish them amongst the available polymers. Applications of dendrimers in a large variety of fields have been explored. Drug delivery scientists are especially enthusiastic about possible utility of dendrimers as drug delivery tool. Terminal functionalities provide a platform for conjugation of the drug and targeting moieties. In addition, these peripheral functional groups can be employed to tailor-make the properties of dendrimers, enhancing their versatility. The present review highlights the contribution of dendrimers in the field of nanotechnology with intent to aid the researchers in exploring dendrimers in the field of drug delivery.     

Carbon nanotubes prevent the coagulation at high shear rates of aqueous suspensions of equiaxed ceramic nanoparticles

Equiaxed ceramic nanoparticles and their mixtures are expected to exhibit shear-thinning behaviour when dispersed colloidally in aqueous media, whereas shear-thickening is the expectation for large aspect ratio phases such as, for example, carbon nanotubes (CNTs). Here, contrary experimental evidence is presented demonstrating the occurrence of severe coagulation at high shear rates in colloidally stable, semi-concentrated, aqueous suspensions of equiaxed SiC nanoparticles (major phase) mixed with equiaxed Y₃Al₅O₁₂ nanoparticles (liquid-phase sintering additive), and how CNT addition prevents this coagulation if sufficient sonication is applied. It is also shown that although shear-thinning is the natural behaviour of the ceramic suspension up to moderate shear rates, coagulation is eventually a phenomenon inherent to the aqueous colloidal processing of these suspensions, with the critical shear rate for coagulation increasing and the rheopexy decreasing the better is the initial dispersion state achieved with the sonication. It is also shown that the critical shear rate for coagulation depends on the exact condition of shear rate increase, and that the re-sheared suspensions coagulate more significantly and at lower shear rates than the fresh suspensions. The mechanisms by which this coagulation occurs and is impeded by the CNTs are discussed, together with broader implications of these phenomena for the environmentally friendly processing of nanostructured ceramics and ceramic composites.