Optimization of structural,electrical, and magnetic properties of ytterbium substituted W-type hexaferrite for multi-layer chip inductors

The rare earth (Yb³⁺) substituted W-type hexagonal ferrites with composition CaPb_2-xYb_xFe₁₆O₂₇ (x = 0.0, 0.5, 1.0, 1.5, 2.0) were synthesized by a facile and cost-effective sol-gel auto combustion method with post heat treatment. The synthesized hexagonal ferrites were characterized by a variety of analytical techniques, and an impedance analyzer was used to investigate the effects of Ytterbium on structural, magnetic, spectral and dielectric properties. The relationship between their impedance, structure and dielectric properties was investigated. The X-ray diffraction patterns verify the presence of single-phase W-type hexagonal ferrites. Physical properties such as D_bulk (bulk density), D_xrd (X-ray density), and P (porosity) of the CaPb_2-xYb_xFe₁₆O₂₇ W-type hexagonal ferrites were calculated. The bulk density of all the samples was decreased, and X-ray intensity was increased with the Ytterbium replacement in the W-type hexaferrite. By adding Yb³⁺ ions, the lattice parameters, cell volume and X-ray density were reduced due to the substitution of ytterbium with smaller ionic radii compared to the lead ion with large ionic radii. The AC-conductivity was increased from (1.523 × 10^?5 to 6.699 × 10^?5) Ωcm^?1. The dielectric constant and tangent loss was found to decrease substantially. The magnetic properties were found to enhance by the substitution of Yb³⁺. The low coercivity value of Yb³⁺ substituted W-type hexagonal ferrites are suitable for magnetic recording media operated at a high-frequency regime. The enhancement of electrical, dielectric and magnetic characteristics suggests these materials as promising for multi-layer chip inductors (MLCIs) circuit applications.     

Investigation of structural,optical, magnetic,and dielectric properties of calcium hexaferrite synthesized in presence of Azadirachta indica and Murraya koenigii leaves extract

M-type calcium hexaferrite- CaFe₁₂O₁₉ (CaM) has been prepared in presence of Azadirachta indica, and Murraya koenigii leaves extracts, followed by calcination at 650 °C for 3h. It was observed that the presence of phytochemicals in both leaves extract plays a vital role in deciding the structural, optical, microstructural, magnetic, and dielectric properties of prepared CaM hexaferrites. Prepared samples were characterized using FT-IR, XRD, UV–Vis, SEM, VSM, and dielectric measurements. FTIR, UV– Vis, and antioxidant assay confirmed the presence of phenolic content and antioxidant property of plant extract. This further resulted in the formation of a pure hexagonal phase as revealed by the XRD analysis. The surface morphology of prepared ferrites modified through this greener route was illustrated by the spongy appearance of ferrites in SEM micrographs.The saturation magnetization for the CaM powder prepared using Murraya koenigii leaves extract is 11.78 Am²/kg, while that prepared from Azadirachta indica leaves extract is 3.56 Am²/kg. Both samples show a magnetically soft nature, with a multidomain structure. The energy bandgap was also observed to be 2.01 eV. Moreover, the calcium ferrite synthesized by Murraya koenigii leaves had ε’_max ～ 25 and that synthesized in presence of Azadirachta indica leaves had ε’_max ～ 200 at ～20 Hz.     

Ag-doped nickel ferrites and their composite with rGO: Synthesis,characterization, and solar light induced degradation of coloured and colourless effluents

Nickel ferrites (NF), silver doped nickel ferrites (AgNF), and a composite of silver doped nickel ferrites with reduced graphene oxide (AgNF@rGO) were prepared through the co-precipitation method. The X-ray diffraction analysis was carried out to confirm the structure of prepared materials, and the crystallite size of prepared ferrites was less than 10 nm. FT-IR spectroscopy was performed for the confirmation of functional groups present in the synthesized materials. The surface morphology of prepared samples was investigated via scanning electron microscopy. Optical analysis was carried out with the help of UV–Visible spectroscopy. Thermogravimetric analysis was performed to check the thermal stability. The photocatalytic degradation of methylene blue under solar light irradiation was studied. The AgNF@rGO composite showed 76% degradation of coloured compound (methylene blue) and 50% degradation of colourless compound (benzimidazole). The enhanced photocatalytic degradation efficacy of AgNF@rGO was ascribed to the reduced graphene oxide sheets, which provided a large surface area and the ability to trap electrons from the conduction band. As a result, the decreased recombination rate of electrons and holes enhanced the degradation ability of the composite based photocatalyst. A scavenging experiment was also performed to determine the most photoactive species taking part in the degradation process. In comparison among all prepared samples, AgNF@rGO showed the maximum photocatalytic activity. It was because of the large surface area of the AgNF@rGO. It was investigated that AgNF@rGO is the most effective catalyst for the degradation of coloured and colourless organic pollutants.     

Multiferroic behaviour in ‘Bi’ doped solid solution SmFeO3-BaTiO3 perovskite system

The solid solution of (Sm_0.75Bi_0.25FeO₃)_0.5 (BaTiO₃)_0.5 perovskite system is developed through conventional solid state reaction route. Prepared compound is thoroughly analyzed for its multipurpose use by studying its multiferroic character. The XRD spectra verifies the synthesized material is crystallize in tetragonal structure (space group = P4mm). The identification of the involved elements and their actual oxidation states are inspected through X-ray photoelectron spectroscopic (XPS) technique. Dielectric studies reveal the material has high dielectric constant at room temperature for possible storage devices. The relaxation process in the system is related to the short-range portability of charge transporters as studied from modulus spectra. Material can be beneficial for memory devices according to the room temperature multiferroic studies.     

Enhanced structural,electromagnetic and absorption features of CoSm ferrite-metamaterial absorbers through synergistic effects

Currently, materials with outstanding absorption abilities, such as thin size, better absorbing power, and light weight are the need of industry to resolve the electromagnetic issues. However, the research on optimizing the composition of the material, microstructure and the structure of the absorber are also the important factors for enhancing the absorption features. A metamaterial microwave absorber (MMA) based on nano ferrites with desirable absorption peaks is proposed and simulated. Sol-gel auto combustion route is used to prepare the nanosized Sm doped Co ferrite with Co_1+xSm_xFe_2-2xO₄ at x = 0.00, 0.03, 0.06, 0.09, respectively. XRD, VSM, FESEM, and VNA were employed to evaluate the structural, magnetic, morphological, and dielectric features. Rietveld refinement of the XRD patterns of samples was evaluated. Refined parameters show the spinel phase's emergence and the Fe₂O₃ phase. Grain size and crystallite size were increased with Sm doping in Co ferrite. Electromagnetic studies depicted that the highest dielectric constant value was found at x = 0.09 and the minimum value at x = 0.03, respectively. Sm doped Co ferrite at x = 0.09 depicted high Q values at higher frequencies. The coercivity values first decreased and then increased. All samples exhibit variations in coercivity and magneto-crystalline anisotropy constant. This variation was attributed to the super-exchange interactions and strong LS coupling of the cations. The multiple absorption peaks are attained for TE-polarization, and the absorptivity is considerably improved for x = 0.09. The proposed absorber simulated from CST depicted the absorption peaks of the S-band and C-band of the microwave regime. The synergistic effects among the metamaterial and ferrite layers may enhance the absorption feature and would be useful for satellite communication applications.     

Hydrothermally prepared binary metal hydroxide electrode with a rational design and an innovative structure for electrochemical capacitors

The development of highly effective electrodes with new structures and rational designs is a major challenge for materials researchers in the twenty-first century, as it will aid in the improvement of energy storage device efficiency. Materials having high conductivity, a large surface area, a large number of pores, a network structure, and good stability are usually considered to be suitable for practical usage in modern electrochemical capacitors (ECCs). The ever-increasing need for high-performance ECCs has prompted materials researchers to create and design a new class of materials with integrated features. We manufacture a new honeycomb-like Co/Ni-LDH material in this paper and deposit it directly onto carbon cloth (CC, Co/Ni-LDH@CC) through the hydrothermal process to develop the binder-free and flexible electrode for ECC applications. Chemical composition, texture, thermal stability, shape, surface area, and the nature of atomic and molecular interaction in the produced Co/Ni-LDH@CC sample were all investigated using EDX, PXRD, TGA, FESEM, BET, and TGA techniques, respectively. In terms of application, our self-supporting and flexible electrode has an outstanding gravimetric capacity (C_g) of 1916 F/g and a remarkable preservation of 96.6% at the end of 6000 testing cycles. Our integrated electrode, in addition, has a better rate capability, as shown by the fact that it retains 69.15% of capacitance even after a fifteen-fold rise in the applied current density. The Co/Ni-LDH electrode's excellent electrochemical activity is a result of its self-supporting design, higher electronic conduction, non-resistive current collector, larger surface area, network structure, and very porous bulk.     

Preparations and characterizations of Ca doped Ni–Mg–Mn nanocrystalline ferrites for switching field high-frequency applications

Ca-doped Ni–Mg–Mn spinel ferrites with compositions of Ni_0·5Mg_0·3Mn_0.2Ca_xFe_2-xO₄ (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) were prepared via sol-gel auto-ignition technique. TGA/DTA, FTIR, XRD, FESEM, and VSM were employed to evaluate the thermal, spectral, structural, morphological, and magnetic features of Ca-doped Ni–Mg–Mn spinel ferrites. TGA/DTA curves show the weight loss in the sample. This weight loss was attributed to the oxidation and decomposition of the sample contents at a temperature of 500 °C. XRD reveals a single-phase structure of the Ni–Mg–Mn nano ferrites. A single-phase orthorhombic structure was confirmed for Ca-doped Ni–Mg–Mn ferrites. Structural parameters such as lattice parameter, ‘da’, ‘db’, ‘dc’, and ‘dv’ were evaluated using unit cell software. The absorption peaks at 427 to 538 cm^?1 confirmed the spinel structure, which was evaluated using FTIR. FESEM analyses showed that the agglomerations increased with the doping of Ca in Ni–Mg–Mn ferrites. Remanence, Y–K angles, saturation, coercive force, magnetic squareness, magnetic moment, and anisotropy constant were determined for Ca-doped Ni–Mg–Mn spinel ferrite samples. It is noticed that saturation increases from 29.157 to 51.322 emu/g, whereas remanence increased from 5.34 to 9.40 emu/g, respectively. The permeability, anisotropy constant, and magnetic moments were also found to increase with Ca doping. However, the Y–K angles increased with Ca concentration in Ni–Mg–Mn nano ferrites. In addition, the switching field distribution (SFD) and high-frequency response of all the Ca-doped Ni–Mg–Mn samples were also evaluated. Ca-doped Ni–Mg–Mn samples are suggested to be suitable for switching, filters, inductors, and microwave absorption applications because of the superparamagnetic nature of the prepared spinel ferrites.     

月光石与无色透明拉长石的异同

目前市场上出现了一种无色透明、带有蓝色、橙黄色晕彩的拉长石,外观与月光石十分相似.本文综合了前人研究成果,总结出二者的异同,将这两种长石进行了对比.月光石与无色透明拉长石同属长石族矿物,但分别为两个不同的类质同相系列,在成分上有所区别.无色透明拉长石的折射率与比重比月光石要高;偏光显微镜下月光石呈负低突起,二轴晶负光性,解理少见,不发育双晶,而拉长石则呈正低突起,二轴晶正光性,可见两组交角近90°的解理,聚片双晶发育;月光石中K元素含量较多,而拉长石中Ca、Na的含量则更多;二者的XRD谱线及红外光谱谱线均有较大区别.因此可以通过折射率与比重测试、镜下观察、成分测试及谱学测试来区分月光石与无色透明拉长石.月光效应的形成是由光的散射作用所致,拉长石的晕彩色是因其内部的层状出溶结构对光的干涉所致.     

Effect of cutting process on the stress corrosion susceptibility of AISI 304L stainless steel

During manufacturing of a component, cutting, turning, grinding, and milling operations are inevitable and these operations induce surface residual stresses. In this study, it is shown that, depending on the process employed for cutting, residual stresses generated at the cut surfaces can vary widely and they can, in turn, make the cut surfaces of austenitic stainless steel (SS) prone to stress corrosion cracking (SCC). An austenitic SS 304L plate was cut using three different procesess: bandsaw cutting, cutting using the cut-off wheel, and shearing. Surface residual stress measurement using the X-ray diffraction (XRD) technique is carried out close to the cutting edges and on the cross-section. SCC susceptibility studies were carried out as per ASTM G36 in 45% boiling magnesium chloride solution. Optical microscopic examination showed the presence of cracks, and confocal microscopy was used to measure the depth of cracks. The study confirmed that high tensile residual stresses present in the cut surfaces produced by cut-off wheel and shear cutting make the surfaces susceptible to SCC while the surfaces produced by bandsaw cutting are resistant to SCC. Hence, it is shown that there is a definite risk of SCC for product forms of austenitic SS with cut surfaces produced using cutting processes that generate high tensile residual stresses stored for a long period of time in a susceptible environment.     

Photoactive Earth‐Abundant Iron Pyrite Catalysts for Electrocatalytic Nitrogen Reduction Reaction

The generation of ammonia, hydrogen production, and nitrogen purification are considered as energy intensive processes accompanied with large amounts of CO₂ emission. An electrochemical method assisted by photoenergy is widely utilized for the chemical energy conversion. In this work, earth‐abundant iron pyrite (FeS₂) nanocrystals grown on carbon fiber paper (FeS₂/CFP) are found to be an electrochemical and photoactive catalyst for nitrogen reduction reaction under ambient temperature and pressure. The electrochemical results reveal that FeS₂/CFP achieves a high Faradaic efficiency (FE) of ≈14.14% and NH₃ yield rate of ≈0.096 µg min^?1 at ?0.6 V versus RHE electrode in 0.25 m LiClO₄. During the electrochemical catalytic reaction, the crystal structure of FeS₂/CFP remains in the cubic pyrite phase, as analyzed by in situ X‐ray diffraction measurements. With near‐infrared laser irradiation (808 nm), the NH₃ yield rate of the FeS₂/CFP catalyst can be slightly improved to 0.1 µg min^?1 with high FE of 14.57%. Furthermore, density functional theory calculations demonstrate that the N₂ molecule has strong chemical adsorption energy on the iron atom of FeS₂. Overall, iron pyrite‐based materials have proven to be a potential electrocatalyst with photoactive behavior for ammonia production in practical applications.