Double pyrovanadates CaMgV2O7: Formation mechanism,phase structure,and thermodynamic properties

A double pyrovanadate CaMgV₂O₇ sample was synthesized via a facile solid-state route under an air atmosphere. The nonequilibrium formation pathways of the CaMgV₂O₇ were investigated via powder X-ray diffraction. A multistep reactions path (metavanadates–pyrovanadates–double pyrovanadate CaMgV₂O₇) was proposed to describe the formation of the CaMgV₂O₇ considering the thermodynamic and kinetic factors. The cell unit parameters of the CaMgV₂O₇ sample indicated the crystallization according to a monoclinic system with space group P12/c1(14), and the lattice parameters of a = 6.756 Å, b = 14.495 Å, c = 11.253 Å, β = 99.12, and V = 108.806 Å³. X-ray photoelectron spectroscopy also confirmed the +5 oxidation state vanadium in CaMgV₂O₇. The endothermic effects at 1033 and 1143 K were related to the incongruent melting and liquidus temperatures of CaMgV₂O₇, respectively. The comprehensive thermodynamic properties of CaMgV₂O₇ were established in both low- and high-temperature regions, utilizing a physical property measurement system and multi-high-temperature calorimetry (96 lines). The heat capacity (200 J mol K⁻¹) and entropy (198 J mol K⁻¹) at 298.15 K were computed based on the low-temperature heat capacity values, and the enthalpy of formation at 298.15 K was also estimated. The fitted high-temperature capacity can be used to obtain the changes in the enthalpy, entropy, and Gibbs free energy. This study is part of building a reliable thermodynamic database of the CaO–MgO–V₂O₅ system.     

Simultaneous fractionation of multiple classes of polyphenols from honeybush tea using solid-phase extraction

The structural diversity of polyphenols and the inherent limitations of current extraction techniques pose a challenge to extract polyphenols using a simple and green method. Hence, in this study, a method was developed to simultaneously fractionate multiple classes of polyphenols by only varying ethanol-water solutions. Honeybush tea, which is rich in polyphenols, was selected as a model for this study. Solvent extraction followed by solid-phase extraction (SPE) was developed to obtain a polyphenol-rich fraction from six honeybush samples. Based on a gradient elution programme (10%, 30%, 50%, 70% and 90% (v/v) ethanol-water solution) of SPE, the Strata X cartridge showed a better recovery of most targeted polyphenols under 0.9 mL of the drying volume and 1 mL min⁻¹ of the dispensing speed. The elution programme for fractionating most polyphenols was as follows: single elution with 50% ethanol, followed by twice elution with 70% ethanol. The antioxidant capacity was used to analyse the differences among the polyphenol-rich fractions from six honeybush samples. Principal component analysis (PCA) revealed that unfermented C. genistoides (GG) has the greatest antioxidant capacity among the honeybush species studied. Additionally, mangiferin, isomangiferin and vicenin-2 were the main contributors to the antioxidant capacity in six honeybush fractions according to the correlation study.     

Montmorillonite-perlite-iron ceramic membranes for the adsorption/removal of As(III) and other constituents from surface water

In this study, ceramic membranes made of montmorillonite, perlite and iron were used to remove As(III) from water. Membranes prepared with 0.0, 0.5, 1.0, and 1.5 wt% of iron content were used to filtrate As(III) synthetic water and surface water solutions. As(III) adsorption capacity and removal efficiency, and other parameters such as cations and anions content, turbidity, pH, electrical conductivity were used to evaluate the membranes' performance. Results show that the As(III) adsorption/removal capacity of membranes was improved by the addition of iron. Adsorption capacity of 7.5 μg As(III)/g and removal efficiency of 97% can be achieved in membranes with 1.0 wt% of iron filings content for surface water; however, a greater amount of iron in the membrane structure limits the adsorption capacity of As(III). Besides the capacity of ceramic membranes to adsorb/remove As(III), membranes were also effective to remove other ions, turbidity, and electrical conductivity from the surface water. The addition of iron to the ceramic membranes enhanced their capacity to remove such surface water constituents. These results are important from the practical viewpoint showing the potential of ceramic membranes for the removal of metalloids and other water constituents. Langmuir isotherm model best described the adsorption process in ceramic membranes, suggesting that adsorption of As(III) happened on a monolayered surface of the ceramic membrane.     

两种混合单元混合机理的数值模拟

为了研究SV型和SX型混合单元在全静态乳化器的混合机理,使用群体平衡模型对乳化器内部流场进行模拟分析。结果表明,SV型与SX型混合单元的混合机理是油相与水相材料通过混合单元时其空间流动方向改变,在流场内形成大量的漩涡,从而达到乳化的目的;通过比较流体在经过SV型和SX型混合单元后的水相索特平均直径(d_(32)),得出SV型混合单元的乳化效果更强,但同时消耗更多的能量,压降更大。     

Anchor plate bearing capacity in flexible mesh facings

This work addresses the problem of the loading capacity of an anchor plate coupled with a steel wire mesh in soil retaining applications. The interaction mechanism between the flexible mesh facing, the underlying soil layer and the plate is studied starting from the results of several laboratory punch tests involving both the plate and the mesh only, and the whole soil-mesh-plate system. The experimental tests have been reproduced by adopting a 3D discrete element model where also the wire mesh is discretized as an assembly of interconnected nodal particles. The interaction between these particles is ruled by elasto-plastic tensile force–displacement laws in which a distortion is introduced in a stochastic manner to account for the wires’ geometrical irregularities. The mesh model is then validated with reference to a set of punch tests in which the shape and size of the punching element as well as the nominal wire diameter were varied. Subsequently, the model is extended to a punch against soil test configuration permitting an insight into the nontrivial local mechanism between the mesh facing and the underlying granular layer. The good agreement between the numerical predictions and the experimental observations at the laboratory scale allowed us to extend the model towards more realistic field conditions for which the role of the mesh panel boundary conditions, the mesh mechanical properties, the soil mechanical properties and the anchor plate geometry is investigated.     

Consolidation considering increasing soil column radius for dredged slurries improved by vacuum preloading method

Soil column is often investigated in the improvement of dredged slurries. Different from the smear zone, the soil column forms gradually and has extremely low permeability. This study presents an analytical solution for soil consolidation considering the increasing radius of the soil column and time-dependent discharge capacity. Based on the solution, the influence of the radius' increase on the consolidation behavior is found significant when the soil column has low permeability and large final radius, and the increase of formation time can lead to the increase of consolidation speed and final consolidation degree.     

Finite element limit analysis of load-bearing performance of reinforced slopes using a non-associated flow rule

This paper presents a numerical study on the load-bearing performance of reinforced slopes under footing load using a finite element limit analysis (FELA) method where a non-associated flow rule is assumed in the analysis. The method was validated against results from full-scale model tests and a limit equilibrium (LE) analytical method. A series of parametric analyses was subsequently carried out to examine the influences that the soil dilation angle, footing location, and reinforcement design (i.e. length, tensile strength, and vertical spacing) could have on the load-bearing performance of reinforced slopes. Results indicate that dilation angle has a significant influence on the predicted magnitudes of bearing capacity, slope deformation, and mobilized reinforcement load. The predicted values of bearing capacity using the FELA are smaller than those from the Meyerhof's analytical method for unreinforced semi-infinite foundation, especially for larger friction angle values. Additionally, the ultimate bearing capacity of the slope and its corresponding horizontal deformation increase with the reinforcement tensile strength. Finally, the slip planes under the applied footing load are found to be y-shaped and primarily occur in the upper half of the slope.     

Thermodynamic properties of sodium hexatitanate (Na2Ti6O13) at high temperature (298.15–1573 K)

Sodium hexatitanate (Na₂Ti₆O₁₃) was reported as an anode side material for Sodium ion batteries owing to low material cost, high energy efficiency, good thermal stability and long cycle life. Therefore, studies pertaining to the thermodynamic properties of Na₂Ti₆O₁₃ are indispensable for improving its service performance. However, a significant number of literature reviews concerning thermodynamic properties indicated that heat capacity of Na₂Ti₆O₁₃ at high temperatures should be confirmed. In this study, the 99.5% purity of Na₂Ti₆O₁₃ sample was successfully prepared via solid-state reaction using TiO₂ and Na₂CO₃ as initial materials. Heat capacity of the as-synthesized samples in the temperature range of 573–1523 K was measured using a multi-high temperature calorimeter 96 line. Heat capacity, Cp, from 298.15 to 1573 K was modeled as a polynomial formula with a prediction error of 3%: Cp = 474.08143 + 0.06286T-8.04068 × 10⁶ T⁻² (J⋅mol⁻¹⋅K⁻¹). In combination with the low-temperature data, heat capacity of Na₂Ti₆O₁₃ from 0 to 1573 K was given in present study. Values of changes in enthalpy, Gibbs free energy and entropy in the temperature range of 298.15–1573 K were calculated based on the temperature dependence of heat capacity.     

The effects of preparation and cooking processes on vitamins and antioxidant capacity of sour and spicy potato silk

The effect of a traditional dish sour and spicy potato silk preparation and cooking process on B vitamins, phenolic profiles and antioxidant activities was investigated. Results showed that cutting of potato caused an increase in VB₁, VB₂, nicotinic acid, nicotinamide, VB₇ and VB₉. Soaking decreased the content of B vitamins and vitamin C. Blanching and rinsing caused the contents of B vitamins and vitamin C decrease compared to the control. The content of VB₁, VB₅ and VB₆ after rinsing increased compared to soaking and blanching processes. However, VB₁, nicotinamide, VB₅, VB₆ and VC decreased sharply after the stir-frying process. The content of VB₁, nicotinic acid, nicotinamide, VB₇ and VC retained the most after five steps compared to the control. In addition, there was no difference in VB₉ contents among different cooking processes compared to the control. Superoxide dismutase (SOD) exhibited a reduction rate of 95.32% and peroxidase (POD) 97.13% after the stir-frying process.     

页岩气地质评价关键实验技术的进展与展望

页岩气地质评价实验结果为页岩气地质"甜点"评价、地质选区、储量计算、水平井压裂层段优选及开发方案确定等提供了重要的数据基础与科学依据。近年来,随着我国页岩气勘探开发工作的不断深入,相关地质评价实验技术也取得了较大的进展。特别是在页岩微观孔隙结构、含气性和物性这3个方面,通过引进先进技术与自主设备研发相结合,建立了适用于我国海相页岩的分析测试技术和标准,对于推动我国页岩气的勘探开发进程发挥了重要的作用。为了给我国页岩气基础地质研究、实验室建设及相关标准制定提供参考和指导,归纳总结了国内外在上述3项页岩气地质评价关键实验技术方面所取得的进展,并对相关技术未来的发展趋势进行了展望。研究结果表明:①对于页岩微观孔隙结构测试,目前已经形成了多种手段相结合的定性观测和定量表征测试方法,实现了由静态表征向动态表征的转化,未来需要在页岩孔隙结构的原位表征和孔内流体赋存特征直接观测等方面做进一步的研究;②对于页岩含气性测试,目前已经建立了现场与室内相结合的含气性定量表征系列技术,实现了对页岩吸附气和游离气赋存特征的定量评价,未来需要在深层页岩损失气量计算、页岩气吸附机理及模型等方面做进一步的研究;③对于页岩物性测试,目前已经建立了多种方法相结合的孔隙度和渗透率测试技术,实现了对页岩孔隙有效性的定量评价,未来需要在孔隙度测试条件和方法等方面进行对比研究并统一标准。结论认为,只有不断地改进和优化页岩气地质评价实验技术,才能够满足科研与生产的需求。