Technological and sensorial properties of liquid nitrogen ice cream enriched with protein from brewing waste (trub)

Debittered trub (brewing waste) is an important source of protein source (70.26%). Trub and whey protein were used for 5% protein enrichment of ice cream frozen by liquid nitrogen. Three formulations were elaborated: ice cream standard (ICS), ice cream with whey protein (ICW) and ice cream with trub (ICT). Chemical composition, rheological properties, texture, overrun, melting rate, scanning electron microscopy and a sensorial test were performed. Results showed that ICT presented a higher viscosity, obtained on the upward curve up to 6.76 Pa s⁻¹, consistency index (22.96 (Pa s⁻¹)ⁿ), hysteresis area (140.40 mPa s⁻¹) and hardness (31113.33 g) but a lower melting rate (0.38 g min⁻¹), overrun (13.92%) and sensorial acceptability than the other formulations. The addition of trub debittered for protein enrichment improved ice cream properties and demonstrated that it could be used as a food ingredient.     

海藻化工以氢氧化钙作为钙化剂的新型钙化工艺研究

研究了海藻化工中以氢氧化钙作为钙化剂的新型钙化工艺,使用氢氧化钙+氯化钙作为褐藻酸钠的钙化剂替代传统的单一氯化钙。确定的双钙钙化工艺条件：每升褐藻酸钠胶液（褐藻酸钠质量浓度为2.5 g/L）,添加氯化钙溶液29.0 mL（质量分数为5%）,添加氢氧化钙溶液13.75 mL（质量分数为5%）,复合钙化剂中氯化钙与氢氧化钙物质的量比为1.19∶1。与传统工艺相比,新型钙化工艺褐藻酸钠的产率未有明显变化,得到的褐藻酸钠粘度稍有降低,粘度由275.1 mPa·s降低至241.3 mPa·s;氯化钙使用量降低40%以上,总钙添加量减少19%。双钙钙化工艺实现了对钙化废水的再利用,废水中钙质量浓度经处理由483 mg/L降到20 mg/L左右,电导率由6.84 mS/cm降至4.28 mS/cm;经脱钙处理的钙化废水回用后对产品褐藻酸钠的产率和粘度没有显著影响。新工艺操作简单,不仅有效减少了钙化废水中离子的引入,同时可以实现低成本地脱钙,脱钙后的废水可以作为冲稀水回收利用,减少了水资源的消耗,为海藻化工行业的减排提供了一条新的工艺途径。     

Generation of Technology-Independent Retargetable Analog Blocks

This paper introduces a complete methodology for retargeting of analog cells to different sets of specifications. This methodology is technology-independent, thus allowing the migration, from one technology to another, of the circuit under retargeting. Careful integration of the device sizing and layout generation tasks via the incorporation of layout constraints during the sizing process allows to generate fully functional designs in a few minutes. The methodology is illustrated via the retargeting of a fully-differential Miller-compensated two-stage operational amplifier for a new set of specifications and two different technological processes.An erratum to this article can be found at     

Beyond Boundary Objects: Collaborative Reuse in Aircraft Technical Support

Boundary objects are a critical, but understudied, theoretical construct in CSCW. Through a field study of aircraft technical support, we examined the role of boundary objects in the practical achievement of safety by service engineers. Their resolution of repair requests was preserved in the organization’s memory via three compound boundary objects. These crystallizations did not manifest a static interpretation, but instead were continually reinterpreted in light of meta-negotiations. This suggests design implications for organizational memory systems which can more fluidly represent the meta-negotiations surrounding boundary objects.     

基于构件技术的卫星地球站站控系统的设计模型

本文在分析已有卫星地球站站控系统模型优缺点的基础上，立足于站控系统的开放性、集成性和效率，运用基于构件的软件工程技术，提出一种层次清晰、接口规范、联系简洁、易于扩充的站控系统构件模型，并详细分析了模型中各构件的功能和构件间的通讯。该系统模型便于实现结构灵活、开放性强的实用系统。同时，构件也为易于实现软件
件复用。     

基于知识的可重用构件查询系统KCQ

本文提出了一个基于知识的、支持面向对象程序设计方法的软件重用构件查询系统，本系统采用了语义网络知识表示模型，提供了构件知识表示语言ＣＫＲＬ，来描述可重用构件的特征和用于检索的知识．提供了语义网络联想式查询、条件查询和构件评价．     

Object-extending class transformations

Reorganisation and evolution of class hierarchies is important for object-oriented system development and has received considerable attention in the literature. The contributions of this paper are: (1) a formal study of a set of extension relations and transformations on class hierarchies; (2) a presentation of a small set of primitive transformations which form a minimal and complete basis for the extension relations; and (3) an analysis of the impact of these transformations at the object level.The study leads to a better understanding of evolution and reuse of object-oriented software and class hierarchies. It also provides a terminology and a means of classification for design reuse. The theory presented in this paper is based on the Demeter data model, which gives a concise mathematical foundation for classes and their inheritance and part-of relationships. Parts of the theory have been implemented in the Demeter System ^TM C++, a CASE tool for object-oriented design and programming.     

陈垃圾土的压缩性试验研究

首先介绍了重庆市主城区填埋场的现状，论述了深入研究陈垃圾土压缩特性的重要性。作者在简要总结了采样场内陈垃圾土的基本物理性质后。通过室内侧限压缩试验(亦称固结试验)，得出了描述陈垃圾土压缩性质的基本参数，如αv、Es、mv和Cc等，试验表明陈垃圾土是一种不同于常见土类的高压缩性欠固结土，试验结果可为填埋场再利用和已封闭填埋场的沉降计算提供依据。     

Unix tools as visual programming components in a GUI‐builder environment

Development environments based on ActiveX controls and JavaBeans are marketed as ‘visual programming’ platforms; in practice their visual dimension is limited to the design and implementation of an application's graphical user interface (GUI). The availability of sophisticated GUI development environments and visual component development frameworks is now providing viable platforms for implementing visual programming within general‐purpose platforms, i.e. for the specification of non‐GUI program functionality using visual representations. We describe how specially designed reflective components can be used in an industry‐standard visual programming environment to graphically specify sophisticated data transformation pipelines that interact with GUI elements. The components are based on Unix‐style filters repackaged as ActiveX controls. Their visual layout on the development environment canvas is used to specify the connection topology of the resultant pipeline. The process of converting filter‐style programs into visual controls is automated using a domain‐specific language. We demonstrate the approach through the design and the visual implementation of a GUI‐based spell‐checker. Copyright © 2001 John Wiley & Sons, Ltd.     

构件重用技术在雷达软件中的应用

随着雷达软件系统技术的发展 ,软件规模、复杂度也越来越大 ,对开发、调试、功能升级等带来难度。文中提出了利用构件技术开发雷达软件系统的思想 ,并给出利用构件技术研制雷达软件系统的基本思路