焦炉前反馈热工控制系统运行实践

焦炉生产是典型的大惯性、非线性、时变快的复杂系统，以“火落温度”为基础的焦炉前反馈热工控制系统，通过立火道温度自动测量与人工测温相关性分析、粗煤气温度测量与火落判断、标准温度的优化等运行实践，达到了自动火落时间判断、标准温度指导、加热和燃烧优化、高低温炉号判别等目的，对于稳定炉温、降低回炉煤气消耗、提高焦炭质量以及推进焦化企业技术进步具有重要意义。     

新加坡食品较健康选择标志系统经验启示

文章介绍了新加坡较健康选择标志系统基本情况,从规格与使用要求、申请程序、适用范围等进行阐述,指出新加坡作为第一个实施食品FOP标签系统的亚洲国家,其经验做法对中国乃至多数亚洲国家有重要借鉴意义,中国FOP标签系统应具有充分的依据,严格规范申请和使用行为并适度扩大应用范围。     

排风扇前盖注射模设计

分析了排风扇前盖塑件的工艺特点,介绍了排风扇前盖注射成型模结构及模具的工作过程。     

Occurrence and distribution of dibenzofurans and benzo[b]naphthofurans in the crude oils from the Northern and offshore Niger Delta basin,Nigeria

The occurrence and distributions of dibenzofurans (DBFs) and benzo[b]naphthofurans were investigated in crude oils from Niger Delta, Nigeria, by gas chromatography-mass spectrometry-mass spectrometry. The distribution of DBFs was characterized by the predominance of C₂-dibenzofurans. 4-Methyldibenzofuran was the most abundant among the methyldibenzofurans isomers while dimethyldibenzofuran-2 (DMDBF-2), ethyldibenzofuran-1, DMDBF-3, and DMDBF-6 occurred in higher amounts when compared with other DMDBFs. Among the benzonaphthofurans, the abundance of benzo[b]naphtho[2,1-d]furan was higher than other isomers. The DBFs distributions in the oils were not affected by source facies and depositional environments. However, the DBFs concentrations increased with increasing maturity in oils from ADL and MJO oilfields.     

香肠整体营养价值评价与包装正面标签应用研究进展

为促进我国消费者对香肠的合理消费与饮食健康，引导企业生产营养健康的香肠，利用《中国食物成分表》（第1册第2版）的16 种香肠及其营养素数据，构建富含营养素食物（nutrient-rich foods，NRF9.3）模型，评价香肠整体营养价值，并借鉴瑞典的锁孔（Keyhole）标识和英国的多交通灯信号标签进行相应的包装正面（front of package，FOP）标签应用探索。结果表明：除了儿童肠、火腿肠外，14 种香肠的NRF9.3＜0，每100 kcal的推荐性营养素含量均低于限制性营养素，对人体的营养价值较低，适合采用总结指示体系和特定营养素体系的FOP标签进行标示；因此，居民日常应限制香肠摄入，建议对脂肪、盐含量超标的香肠采用红色交通灯信号标签提醒消费者，对NRF9.3＞0的香肠实施单一的健康选择标识推荐消费者选购。     

Flame Front Deformation Instabilities of Filtration Combustion for Initial Thermal Perturbation

The flame front deformation instability of low-velocity filtration combustion within an inert packed bed is studied based on the initial preheating non-uniformity. Based on the experimental phenomena, an initial thermal perturbation model is numerically proposed so as to predict the deformation behaviors of the flame front instabilities. The numerical prediction indicates that the assumption of an initial thermal perturbation is a feasible explanation as the cause of the flame front inclination instability. As the initial thermal perturbation increases, the phenomena of the flame front break and shrinking instabilities could easily occur at high filtration velocity or low equivalence ratio. Moreover, the evolutions of the flame front break rate and the shrinking rate are quantitatively analyzed.     

波前传感器电铸镍层应力实时检测精度评估

目的 搭建电铸应力实时检测平台，评估其测量精度，并探明电化学沉积过程中镍层平均内应力的变化规律。方法 采用横向剪切波前传感器搭建电铸应力实时检测平台，通过测量在铸层应力作用下电铸基底弯曲的曲率半径，利用Stoney公式计算铸层平均应力。采用参考球面反射镜评估横向剪切波前传感器曲率半径的测量精度，并在0.5 A/dm2电流密度下进行电铸应力实时检测实验，对铸层平均应力测量极限进行评估，同时对检测误差进行分析。结果 横向波前传感器曲率半径测量精度为99.22%，在0.5 A/dm2电流密度下，所搭建的铸层应力实时检测平台可测量的最小厚度为5.1 μm，由曲率测量波动带来的应力检测误差为1.3 MPa。实验测得铸层平均应力随铸层厚度的增加而变大，当铸层厚度达到30 μm左右，铸层平均应力趋于稳定，应力大小为79.7 MPa。同时发现，当铸层厚度小于30 μm时，沿电铸基底长度方向的铸层平均应力明显大于宽度方向铸层平均应力，随铸层厚度的增加，两个方向的应力大小趋于等值。结论 采用横向剪切波前传感器搭建的电铸应力检测平台，能有效对铸层应力进行高精度的实时测量，为精密电铸过程中应力变化规律的研究提供了检测技术基础。     

Effect of particle size and grain composition on two-dimensional infiltration process of weathered crust elution-deposited rare earth ores

The two-dimensional infiltration experiment was carried out by means of digital image technology. The evolution process of the wetting body was described. The wetted front distance and the time show a very significant power function relationship. The horizontal wetted distance is larger than the vertical wetted distance in the initial stage. Then, the vertical distance of the wetted body gradually approaches to the horizontal distance. The infiltration distance decreases as the content of fine particles increases. The wetted front migration rate curve shows a three-stage change law, and it increases with the increase of coarse particle content. The directional velocity ratio is defined. The initial value of horizontal infiltration rate is larger than that of vertical one, and then the vertical infiltration rate is gradually close to the horizontal value. The empirical relationship between the characteristic particle size and the stable infiltration rate is established, which provides a theoretical basis for the prediction of the stable infiltration rate in in-situ leaching.     

Turbulent flame structure characteristics of hydrogen enriched natural gas with CO2 dilution

This paper investigated the hydrogen enriched methane/air flames diluted with CO₂. The turbulent premixed flame was stabilized on a Bunsen type burner and the two dimensional instantaneous OH profile was measured by Planar Laser Induced Fluorescence (PLIF). The flame front structure characteristics were obtained by extracting the flame front from OH-PLIF images. And the turbulence-flame interaction was analyzed through the statistic parameters. The role of hydrogen addition as well as CO₂ dilution on the features of turbulent flame were revealed by those parameters. In this work, hydrogen fractions of 0, 0.2 and CO₂ dilution ratios of 0, 0.05 and 0.1 were studied. Results showed that hydrogen addition can enhance turbulent burning velocity ST/S_L through decreasing the scale of the finer structure of the wrinkled flame front, caused by the smaller flame instability scale. In contrast, CO₂ dilution decreased turbulent burning velocity S_T/S_L due to its inactive response to turbulence perturbation and larger flame wrinkles. For all flames, the probability density function (PDF) profile of the local curvature radius R shows a bias to positive value, resulted from the flame intrinsic instability. The PDF profile of R decreases with CO₂ dilution, while the value of local curvature radius corresponding to the peak PDF is larger. This indicates that larger wrinkles structure was generated due to CO₂ dilution, which leads to the decrease in S_T/S_L as a consequence. Hydrogen addition increases the flame volume and results in more intense combustion. CO₂ dilution has a decrease effect on flame volume for both X_H2 = 0 and X_H2 = 0.2 while the decrease is obvious at X_H2 = 0.2, Z_CO2 = 0.1. In all, hydrogen enrichment improves the combustion while CO₂ can moderate combustion. Therefore, adding hydrogen and CO₂ in natural gas can be a potential method for adjusting the combustion intensity in combustion chamber during the combustor design.