Stable Radicals with Protective Umbrellas Integrated on the Surface of 2D Layered Materials

Radicals are closely related to human life and health and have been widely used in biology, chemistry, functional materials, etc. However, the high reactivity, disorder, and short half-lives limit their wide applications. Therefore, it remains a great challenge to prepare stable and ordered radicals. Herein, radicals are prepared with protective umbrellas (diethylmethyleneamine, DEMA) that are integrated on the surface of 2D layered materials to isolate water and oxygen and enhance the stability of radicals. Taking 2D black phosphorus (BP) as an example: triethylamine reacts with dichloromethane to form quaternary ammonium salts with further Hoffmann elimination to produce DEMA radicals that could react with one electron of a lone pair electrons in P on the surface of BP to produce P radicals, which shows a prolonged half-life of 21 days at room temperature. First-principle calculations and electron paramagnetic resonance fitting confirm that the steric hindrance constructed by dense DEMA passivation layer acts as a protective umbrella and the 2D coupling of P radicals and other P atoms in 2D BP plane to enhance the stability and strong superexchange interaction of P radicals. Furthermore, it is a general strategy to produce stable radicals integrated on the 2D plane.     

Modification of the wood-plastic composite for enhancement of formaldehyde clearance and the 3D printing application

As the formaldehyde is one of the main indoor pollutants, the purpose of this study is to effectively remove indoor formaldehyde pollution by using environmentally friendly 3D printing ornaments. The wood 3D printing filaments cellulose/polylactic acid composite (Cellu/P) was selected as the starting material, and 3-aminopropyltriethoxysilane (APTES) was used for chemical modification to obtain a series of cellulose composite materials with amino groups. The modified composite materials (APTES@Cellu/P) were characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscope, energy dispersive spectroscopy, thermogravimetric analysis, and mechanical tests, and a formaldehyde removal experiment was performed. The feasibility of 3D printing was evaluated, and the process of 3D printing-functionalized customized ornaments was proposed, and then a school emblem was used for modeling, printing, and surface modification. Compared with the commercially traditional activated carbon, 3D printing-customized ornaments of APTES@Cellu/P material has a better formaldehyde removal effect, and can even avoid the secondary pollution that is common to the activated carbon.     

Molecular Dynamics Simulation on the Effect of MgO/Al2O3 Ratio on Structure and Properties of Blast Furnace Slag Under Different Basicity Conditions

Metallurgical and Materials Transactions B - The SiO2-Al2O3-CaO-MgO is the basic structural system of blast furnace slag and the composition directly affects the performance of the slag. Molecular...     

An Improved Torque Sensorless Speed Control Method for Electric Assisted Bicycle With Consideration of Coordinate Conversion

In this paper, we propose an improved torque sensorless speed control method for electric assisted bicycle, this method considers the coordinate conversion. A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling. A DC motor provides assisted power driving, the assistance method is based on the real-time wheel angular velocity and coordinate system transformation. The effect of observer is proved, and the proposed method guarantees stability under disturbances. It is also compared to the existing methods and their performances are illustrated through simulations. The proposed method improves the performance both in rapidity and stability.      

甘草黄酮的提取工艺优化、含量测定及体外抗氧化活性研究

以95%乙醇为提取溶剂提取甘草黄酮,以提取率为评价指标,采用响应面法优化提取工艺;以芦丁为对照品,采用亚硝酸钠-硝酸铝-氢氧化钠比色法测定不同产地甘草黄酮含量;通过DPPH自由基清除反应,比较不同产地甘草黄酮的体外抗氧化活性。结果表明,醇提法提取甘草黄酮的最优工艺条件为:提取温度86.7℃、提取时间4.0 h、液料比80.0∶1.0(mL∶g);在此工艺条件下,甘肃、新疆、内蒙古的甘草黄酮含量分别为18.22 mg·g~(-1)、17.75 mg·g~(-1)、16.82 mg·g~(-1),其对DPPH自由基的清除率分别为63.82%、62.74%、51.41%;3个产地的甘草黄酮的含量及体外抗氧化活性大小顺序均为:甘肃新疆内蒙古。该结论可作为甘草原产地鉴别及质量评价的参考依据之一,为甘草药材的开发利用提供帮助。     

Ultrasonic-vibration-assisted laser annealing of fluorine-doped tin oxide thin films for improving optical and electrical properties: Overlapping rate optimization

An ultrasonic-vibration-assisted laser annealing method was developed to enhance the performance of fluorine-doped tin oxide (FTO) thin films. The influences of ultrasonic vibration, laser scan line overlapping rate (L_OR) and laser spot overlapping rate (S_OR) on surface morphology, FTO layer thickness, RMS roughness, crystal structure and photoelectric properties of the FTO films were investigated. The results indicated that the presence of ultrasonic vibration during laser annealing could significantly enhance the film compactness, and using moderate L_OR and S_OR values resulted in significantly decreased FTO layer thicknesses and RMS roughnesses as well as slightly increased crystallite sizes, thus yielding significantly improved optical transmittance values and slightly enhanced electrical conductivity values. It was found that the optimal L_OR and S_OR values for ultrasonic-vibration-assisted laser annealing of the FTO films were 80% and 90%, respectively. The as-obtained film possessed the best overall photoelectric property with an average transmittance (400–800?nm) of 85.9%, a sheet resistance of 8.7?Ω/sq and a figure of merit of 2.51?×?10^–2 Ω^–1. This work may be of great significance in terms of performance optimization of transparent conducting oxide (TCO) thin films.     

柔性化夹具静动态特性分析及拓扑优化

针对汽车发动机缸盖、变速箱阀体全自动化混合生产线,设计柔性化夹具来满足CNC高精密加工以及快速换产的要求。建立夹具系统三维模型,并利用ANSYS对夹具系统在不同加工工况载荷下进行静态性能分析;从分析结果判断出影响夹具性能的关键结构,并对其进行拓扑优化设计,实现夹具整体减重39.25 kg。然后对改进后夹具模型进行验证分析,发现最大变形量减少为0.0045199 mm,满足设计指标0.005 mm;最后,对现有夹具系统进行模态实验和CAE模态分析,发现夹具系统在Z向受到低频激振力时,容易发生共振,该频段为70 Hz?110 Hz,在加工过程中需要控制刀具加工频率避免发生共振。     

BRISOL钠同位素放射性核束的产生

北京放射性核束装置在线同位素分离器（BRISOL）采用100 MeV、200 μA回旋加速器提供的质子束打靶产生中、短寿命放射性核束，在线分析后供物理用户使用，其质量分辨率好于20 000。为开展²⁰Na核的奇异衰变特性研究，研制了氧化镁靶，并采用100 MeV质子束轰击氧化镁靶在线产生了^20～26Na⁺的钠同位素放射性核束。当质子束流强为8 μA时，²⁰Na⁺离子束的最大产额为2×10⁵ s^-1，²¹Na⁺离子束的最大产额为4×10⁸ s^-1。完成了北京放射性核束装置首个放射性核束物理实验，累计供束近200 h。     

Synthesis of highly transparent and thermally stable copolyimide with fluorine-containing dianhydride and alicyclic dianhydride

The development of optical films is highly desirable for applications in flexible displayers. In this work, a copolyimide (co-PI) film with high thermal stability and high transparency was prepared by the copolymerization of 2,2′-bis(trifluoromethyl)-4,4′-diaminodiphenyl ether, cyclobutanetetracarboxylic dianhydride, and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA). The effects of aliphatic dianhydride and fluorine dianhydride monomers on the optical, thermal, and mechanical properties of the co-PIs were discussed in detail based on the experimental results and theoretical simulations. We found that the preparation of polyimide (PI) based on the combination of two dianhydrides could obtain the PI film with excellent comprehensive performance due to nonconjugated structure and strong electron-withdrawing effect. Through the structure and composition optimization, a PI film of PI-6FDA-70 with T_g of 300 °C, T_d10% more than 500 °C, the average transparency of 90% and the elongation at the breakage more than 8% was prepared. Such molecular design provides a practical approach to develop high-performance colorless PI films. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48603.