Surface modification of cellulose nanocrystals towards new materials development

Cellulose nanocrystals (CNCs) are a kind of sustainable nanoparticle from biomass, which are widely used as reinforcing filler and assembly building block for high-performance composites and function materials including biomaterial, optics, and so forth. Here, their unique advantages in material applications were reviewed based on their rod-like morphology, crystalline structure, dimension-related effects, and multi-level order structure. Then, we focused on the molecular engineering of CNCs, including the structure and physicochemical properties of their surface, along with surface modification methods and steric effects. We further discussed the performance-improvement and functionalization methods based on multi-component complex systems, together with the effects of surface molecular engineering on the performance and functions. Meanwhile, methods of optimizing orientation in uniaxial arrays were discussed along with those of enhancing photoluminescence efficiency via surface chemical modification and substance coordination. In the end, we prospected the design, development, and construction methods of new CNCs materials.     

One-step to prepare high-performance gas diffusion layer (GDL) with three different functional layers for proton exchange membrane fuel cells (PEMFCs)

Gas diffusion layer (GDL) is one of the most important components of fuel cells. In order to improve the fuel cell performance, GDL has developed from single layer to dual layers, and then to multiple layers. However, dual or multi layers in GDL are usually prepared by layer-by-layer methods, which cost too much time, energy, and resources. In this work, we successfully developed a facile one-step method to prepare a GDL with three functional layers by utilizing the different sedimentation rates and filtration rates of short carbon fiber (CF) and carbon nanotube (CNT). The treatment temperature for this GDL is much lower than that of traditional method. The thickness of the GDL can be effectively controlled from as thin as 50 μm to more than 200 μm by simply adjusting the content of CF. The GDL with high flexibility is suitable to develop high performance flexible electronics. The fuel cell with the GDL has the maximum power density 1021 mW cm^?2, which shows 19% improvement comparing to the conventional one. Therefore, this work breaks the traditional concept that GDL for fuel cells only can be prepared by very complex and high-cost procedure.     

Recent progress of electrocatalysts for hydrogen proton exchange membrane fuel cells

Due to stringent environmental regulations and the limited resources of fossil-based fuels, there is an urgent demand for clean and eco-friendly energy conversion devices. These criteria appear to be met by hydrogen proton exchange membrane fuel cells (PEMFCs). PEMFCs have attracted tremendous attention on account of their excellent performance with tunable operability and good portability. Nonetheless, their practical applications are hugely influenced by the scarcity and high cost of platinum (Pt) used as electrocatalysts at both cathode and anode. Pt is also susceptible to easy catalyst poisoning. Herein, this paper reviews the progress of the research regarding the development of electrocatalysts practically used in hydrogen PEMFCs, where the corner-stone reactions are cathodic oxygen reduction reaction (ORR) and anodic hydrogen oxidation reaction (HOR). To reduce the costs of PEMFCs, lessening or eliminating the use of Pt is of prime importance. For current and forthcoming laboratory/large-scale PEMFCs, there is much interest in developing substitute catalysts based on cheaper materials. As such are non-platinum (non-Pt), non-platinum group metals (non-PGMs), metal oxides, and non-metal electrocatalysts. Hence, high-performance, state-of-the-art, and novel structured electrocatalysts as replacements for Pt are needed.     

Triggering the aqueous interparticle association of γ‒Al2O3 hierarchical assemblies using divalent cations and cellulose nanofibers

Understanding aqueous dispersion, rheological properties and colloidal stabilisation mechanisms of hierarchically assembled ceramic powders is important for progress in the fields of catalysis, separation and/or adsorption. The present study was designed to evaluate the rheological and sedimentation behaviour of highly loaded aqueous suspensions (up to φ_A = 0.126) containing AlN-powder-hydrolysis-derived, micron-sized, mesoporous, gamma alumina (MA) particulates with a high surface area (～180 m²/g) dispersed with sodium polyacrylate (NaPAA). The as-prepared suspensions were prone to sedimentation and segregation. However, when divalent cations (Mg²⁺, Ca²⁺) or cellulose nanofibers were added, the formation of interparticle association networks in the aqueous suspensions containing MA particles was triggered, facilitating their long-term resistance to sedimentation lasting more than 12 weeks.     

Structural insights into peptide self-assembly using photo-induced crosslinking experiments and discontinuous molecular dynamics

Determining the structure of the (oligomeric) intermediates that form during the self-assembly of amyloidogenic peptides is challenging because of their heterogeneous and dynamic nature. Thus, there is need for methodology to analyze the underlying molecular structure of these transient species. In this work, a combination of fluorescence quenching, photo-induced crosslinking (PIC) and molecular dynamics simulation was used to study the assembly of a synthetic amyloid-forming peptide, Aβ_16-22. A PIC amino acid containing a trifluormethyldiazirine (TFMD) group—Fmoc(TFMD)Phe—was incorporated into the sequence (Aβ*_16–22). Electrospray ionization ion-mobility spectrometry mass-spectrometry (ESI-IMS-MS) analysis of the PIC products confirmed that Aβ*_16–22 forms assemblies with the monomers arranged as anti-parallel, in-register β-strands at all time points during the aggregation assay. The assembly process was also monitored separately using fluorescence quenching to profile the fibril assembly reaction. The molecular picture resulting from discontinuous molecule dynamics simulations showed that Aβ_16-22 assembles through a single-step nucleation into a β-sheet fibril in agreement with these experimental observations. This study provides detailed structural insights into the Aβ_16-22 self-assembly processes, paving the way to explore the self-assembly mechanism of larger, more complex peptides, including those whose aggregation is responsible for human disease.     

Investigating the effect of custom‐made insoles and exercises on lower limb and back discomfort in assembly‐line workers in a rubber tire factory: A randomized controlled trial

Many occupations require standing for prolonged periods, which can be a major contributor to musculoskeletal problems and cause disturbances in different parts of the body, especially the lower back and lower extremities. The aim of this study was to investigate the effect of custom‐made insoles and exercise training on the lower limb and lower back discomfort in workers on a production line at a rubber tire factory. One hundred male workers (mean age 35.96 years, work experience of 10.62 years, standing time 6.58 hr) participated in this randomized controlled trial. The men were randomly assigned to one of four groups: (a) custom‐made insole plus lower limb exercises, (b) insoles only, (c) lower limb exercises only, and (d) no intervention. Discomfort level was recorded with a visual analog scale and a body map. The data were analyzed with analysis of covariance. The results showed a significant difference in discomfort levels between groups in the lower back (p = .001), thigh (p = .001), and knee (p = .001) areas. The combined insole and exercise group had less discomfort in the lower back, thigh, and knee. In the group that used the insole only without exercises, the discomfort level in the lower back area was reduced. The results indicate that the simultaneous use of insoles and exercises might be an effective intervention to reduce discomfort in the lower limbs and lower back in workers who remain standing for prolonged periods.     

Solution‐Processable Photonic Inks of Mie‐Resonant Hollow Carbon–Silica Nanospheres

Hollow carbon–silica nanospheres that exhibit angle‐independent structural color with high saturation and minimal absorption are made. Through scattering calculations, it is shown that the structural color arises from Mie resonances that are tuned precisely by varying the thickness of the shells. Since the color does not depend on the spatial arrangement of the particles, the coloration is angle independent and vibrant in powders and liquid suspensions. These properties make hollow carbon–silica nanospheres ideal for applications, and their potential in making flexible, angle‐independent films and 3D printed films is explored.     

Natural Silk Film for Magnesium Protection: Hydrophobic/Hydrophilic Interaction and Self‐Healing Effect

Biodegradable implants are required in order to provide successful treatment of injuries. Temporary magnesium‐based implants with particular properties are needed in cases when it is desirable not only to maintain vital activity, but also to initiate the self‐healing process of damaged bones or tissues as well. Unfortunately, the use of magnesium alloys is limited due to the fast biodegradability of the applied material. The aim of this research is to improve the corrosion resistance of magnesium alloys by sonochemical treatment in silk solution followed by additional layer‐by‐layer deposition of natural silk on the magnesium surface. The sonication process is carried out at a frequency of 20 kHz during 5–10 min, while the duration of the silk layer deposition is 15 min. The corrosion behavior of magnesium substrates modified by natural silk layer‐by‐layer assembly is studied. Magnesium substrates sonochemically treated in silk solution demonstrate three times better corrosion resistance compared to control samples sonochemically treated in water. Additional deposition of a silk layer enhances obtained corrosion resistance by 18 times, resulting in a 54‐fold increase overall.     

Scheduling distributed flowshops with flexible assembly and set-up time to minimise makespan

The scheduling problems under distributed production or flexible assembly settings have achieved increasing attention in recent years. This paper considers scheduling the integration of these two environments and proposes an original distributed flowshop scheduling problem with flexible assembly and set-up time. Distributed production stage is deployed several homogeneous flowshop factories that process the jobs to be assembled into final products in the flexible assembly stage. The objective is to find a schedule, including a production subschedule for jobs and an assembly subschedule for products, to minimise the makespan. Such a scheduling problem involves four successive decisions: assigning jobs to production factories, sequencing jobs at every factory, designating an assembly machine for each product and sequencing products on each assembly machine. The computational model is first established, and then a constructive heuristic (TPHS) and two hybrid metaheuristics (HVNS and HPSO) are proposed. Numerical experiments have been carried out and results validate the algorithmic feasibility and effectiveness. TPHS can obtain reasonable solutions in a shorter time, while metaheuristics can report better solutions using more yet acceptable time. HPSO is statistically comparable yet less robust compared with HVNS for small-scale instances. For the large-scale case, HPSO outperforms HVNS on both effectiveness and robustness.