某铁矿强磁尾矿反浮选回收试验研究

针对我国西部某铁矿强磁选尾矿进行了反浮选回收铁资源的试验研究, 探讨了pH值、抑制剂可溶性淀粉用量、阳离子捕收剂十二胺用量对浮选指标的影响。结果表明, 在矿浆pH=10、可溶性淀粉用量2 400 g/t、十二胺用量400 g/t条件下进行一粗一精(精选药剂用量减半)闭路反浮选, 可获得铁品位43.88%、回收率50.93%的铁精矿产品。     

Ceramics composites from iron ore tailings and blast furnace slag

The search for materials and methods capable of reducing human impacts on the environment is of utmost importance nowadays. This study's primary purpose was to analyze the technical feasibility of ceramic composites production utilizing Fundão Dam's Iron Ore Tailings (IOT), Blast Furnace Slag (BFS) from charcoal, and Foundry Sand (FS) as partial substitutes for the traditional raw materials – sand and clay – for application in building industry materials. The composites were molded in rectangular specimens and fired at temperatures of 900, 950, 1000, 1050, and 1200 °C. The developed materials were analyzed and characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Thermogravimetry (TGA), and Differential Thermal Analysis (DTA). The obtained materials had flexural strength modulus of up to 12.19 MPa, water absorption ranging from 2 to 22%, linear shrinkage ranging from 0.02 to 6.50%, and apparent density ranging from 2.03 to 1.63 g/cm³. The study of the internal structure formation process revealed the formation of amorphous structures in the composites. The results demonstrated that these waste materials may be jointly used in construction materials, contributing to the reduction of natural resource extraction, besides enabling their correct disposal, minimizing environmental impacts, and improving the life quality of the surrounding communities.     

提高新疆准东露天煤成浆性的实验研究

为提高准东露天煤的成浆性能,利用宽沟煤、乌东煤、北山煤、黑山煤、红沙泉煤5种煤与准东露天煤进行了混合制浆实验,考察了各单种煤的成浆性能以及单种煤最高成浆浓度条件下混合制浆的煤浆性能。单一准东露天煤浆的成浆性研究表明:准东露天煤单独制浆时,在添加剂添加率3‰下,煤浆最高质量分数为47%,黏度650 mPa·s,但煤浆流动性和稳定性一般。与不同种煤混合制浆研究表明:准东露天煤与宽沟煤、黑山煤容易混合成浆,煤浆的浓度、流动性、稳定性均有明显提高;在准东露天煤与宽沟煤、黑山煤质量比5∶5时,煤浆质量分数可达57%,可满足水煤浆气化炉生产对煤浆的要求。     

德士古水煤浆加压气化技术运行中的问题和处理对策

水煤浆气化装置运行问题较多。对煤浆制备单元进行煤浆提浓改造,通过与类似项目生产装置对比,解决存在的问题,使甲醇产品能根据市场价格调节其产量,提高装置盈利能力。     

攀西钒钛磁铁矿尾矿制备储水泡沫陶瓷的研究

以攀西钒钛磁铁尾矿和废玻璃为主要原料通过高温烧结法制备储水泡沫陶瓷，研究原料配比和发泡剂（SiC）添加量对材料性能的影响。结果表明:随着钒钛磁铁矿尾矿含量的增加，材料的体积密度及抗压强度逐渐增大，平均气孔孔径逐渐减小；当尾矿添加量为50 wt%，材料的体积吸水率出现极值。当SiC添加量为0.3 wt%，材料内部气孔分布均匀，平均孔径约为2.93 mm。最终以50.0 wt%的钒钛磁铁矿尾矿和50.0 wt%的废玻璃为原料，外加3.0 wt%的石英，0.3 wt%的SiC，3.0 wt%的Na3PO4，在1040℃下制得性能最优的储水泡沫陶瓷，材料的体积密度为0.26 g/cm-3、体积吸水率为56.5%和抗压强度为0.68 MPa。采用SEM、XRD等检测手段研究材料的微观形貌及物相组成，结果表明储水泡沫陶瓷内部由三维立体结构组成，有利于储存水分；材料主要物相包括硅灰石、长石、透辉石和钛铁矿。      

基于P波模量的原位胶结充填体强度预测模型研究

原位胶结充填体质量评价通常采用单轴抗压强度作为表征指标,由于在现场工程中无法快速、准确获取充填体的强度值,因此需要建立一种参数易于获取且准确的原位胶结充填体强度预测模型。基于胶结充填体物理力学参数的内在联系,从量纲平衡的角度探索了胶结充填体单轴抗压强度与P波模量的关系。根据C矿和I矿两种原位胶结充填体的密度、P波速度及取芯强度的测试数据,采用线性拟合的方法获得了基于P波模量的原位胶结充填体强度预测模型。通过对C矿和I矿的强度预测模型拟合效果分析可知,P波模量与取芯强度呈正相关性,且拟合效果较好,证明原位胶结充填体强度预测模型精度高,具有很强的实用性。     

影响干式磁选机在石英除铁过程中的因素研究

本文通过对陕西某地石英矿进行干式磁选试验研究,介绍了给料速度、尾矿抛尾率、矿样含水率及含泥量等几个因素对干式磁选作用的影响,分析了干式磁选各因素在石英除铁过程中的规律,为后续工业应用提供一定的理论基础。     

基于彩色图像处理的浮选尾煤灰分软测量研究

浮选尾煤灰分是浮选产品的一个重要指标。针对选煤厂浮选尾煤灰分多采用离线检测而无法实现在线准确测量，以及当前浮选软测量多采用单一的灰度图像从而导致软测量模型精度及适应性较差的问题，提出了一种基于彩色图像处理的浮选尾煤软测量方法，建立了基于最小二乘支持向量机(LSSVM)的浮选尾煤灰分软测量模型。模型以不同颜色空间的彩色特征、灰度均值以及浓度特征为输入变量，以尾煤灰分作为输出变量，采用粒子群优化算法对LSSVM模型参数进行优化。结果表明：所建立的尾煤灰分软测量模型可以较好地实现浮选尾矿灰分的在线预测，引入浮选尾矿图像的彩色特征可以提高尾煤图像分析的精度，预测精度达96.89%。研究成果在柳湾选煤厂现场应用，并取得了较好的尾矿灰分测量效果。     

Making reusable reaction-bonded silicon nitride crucibles for silicon casting from kerf-loss silicon waste

Silicon kerf loss during wafer slicing and the broken quartz crucibles after silicon casting are two major solid wastes from photovoltaic (PV) industry. Especially, the recycle of kerf-loss silicon has become an urgent issue because near 100 000 t of solid wastes are generated every year. One of the most meaningful recycle routes of the kerf-loss silicon is to make silicon nitride crucibles to replace the quartz crucibles. In this study, we demonstrated how this is feasible through acid leaching refining, slip casting, and nitridation. The reaction-bonded silicon nitride (RBSN) crucibles after oxidation were found pure enough for silicon ingot growth. More importantly, they could be reused after ingot growth. With the present examples, the potential of using the kerf-loss silicon for fine ceramics is prominent.     

北洺河铁矿全尾砂胶结充填治理塌陷区的可行性研究

北洺河铁矿为践行“绿水青山就是金山银山”的绿色发展理念,探索利用选厂尾矿治理地表塌陷区方案。通过对北洺河铁矿塌陷区稳定性分析以及对全尾砂膏体制备、输送、胶结充填技术可行性试验研究,并结合经济估算、环境和社会效益等综合分析,认为全尾砂胶结充填治理塌陷区的方案可行。