Direct ink writing of vancomycin-loaded polycaprolactone/ polyethylene oxide/ hydroxyapatite 3D scaffolds

Novel inks were formulated by dissolving polycaprolactone (PCL), a hydrophobic polymer, in organic solvent systems; polyethylene oxide (PEO) was incorporated to extend the range of hydrophilicity of the system. Hydroxyapatite (HAp) with a weight ratio of 55–85% was added to the polymer-based solution to mimic the material composition of natural bone tissue. The direct ink writing (DIW) technique was applied to extrude the formulated inks to fabricate the predesigned tissue scaffold structures; the influence of HAp concentration was investigated. The results indicate that in comparison to other inks containing HAp (55%, 75%, and 85%w/w), the ink containing 65% w/w HAp had faster ink recovery behavior; the fabricated scaffold had a rougher surface as well as better mechanical properties and wettability. It is noted that the 65% w/w HAp concentration is similar to the inorganic composition of natural bone tissue. The elastic modulus values of PCL/PEO/HAp scaffolds were in the range of 4–12 MPa; the values were dependent on the HAp concentration. Furthermore, vancomycin as a model drug was successfully encapsulated in the PCL/PEO/HAp composite scaffold for drug release applications. This paper presents novel drug-loaded PCL/PEO/HAp inks for 3D scaffold fabrication using the DIW printing technique for potential bone scaffold applications.     

Ternary type BaY2ZnO5: Eu3+ deep-red phosphor for possible latent fingerprint,security ink and WLED applications

Pc-WLEDs are considered to play a spectacular role in future generation light sources in view of their outstanding energy efficiency. In this regard, Eu³⁺ activated BaY₂ZnO₅ phosphor was prepared and investigated by XRD, PL and SEM analyses. Rietveld refinement analysis was carried out to confirm the structure of the synthesized phosphor. The prepared phosphor shows an intense red emission around 627 nm under excitation by near UV light. The ⁵D₀-⁷F₂ transition intensity of the prepared phosphor is three times higher compared to the commercial (Y,Gd)BO₃:Eu³⁺ red phosphor. The CIE colour coordinates of BaY₂ZnO₅:Eu³⁺ (9mol%) phosphor corresponds to be (0.6169, 0.3742) and it has a high 97.9 % colour purity. The obtained results reveal the utility of BaY₂ZnO₅:Eu³⁺ phosphor as an efficient red component in WLEDs, anti-counterfeiting and fingerprint detection applications.     

The impact of the thermal treatment during ink preparation on the ionomer-supported catalyst interactions in the catalyst layers

Catalyst slurries (inks) were prepared with and without thermal treatment to determine the support/ionomer structures and interactions in the catalyst layer (CL) which impact on membrane electrode performance and durability. The thermal treatment of the ink has a nominal effect on the ionomer/support structure in which the carbon support is non-graphitised. The agglomerate/aggregate structures have a high degree of support/ionomer interface and sufficient macroporosity for water movement in the CL. This improves the membrane electrode assembly (MEA) performance, but also accelerates electrochemical carbon degradation. Thermal treatment of graphitised support-containing inks resulted in increased performance facilitated by a larger support/ionomer interface. Without thermal treatment, the more hydrophobic support would form aggregate structures in which water contact was restricted, limiting proton transfer, isolating catalyst, decreasing performance. The water limited access, would however, prolong stability during accelerates carbon degradation. The electrochemical properties were studied using full and half MEA cells.     

Preparation of P(St-NMA) microsphere inks and their application in photonic crystal patterns with brilliant structural colors

Patterned photonic crystals with structural colors on textile substrates have attracted a special attention due to the great advantages in application, which currently become a research hot-spot. This study utilized an ink-jet printing technology to prepare high-quality photonic crystal patterns with structural colors on polyester substrates. The self-assembly temperature of poly(styrene-N-methylol acrylamide) (P(St-NMA)) microspheres set to construct photonic crystals were deeply optimized. Moreover, the structural colors of prepared photonic crystal patterns were characterized and evaluated. When the mass fraction of P(St-NMA) microspheres was 1.0 wt.%, the pH value ranged from 5 to 7, and the surface tension was in the range of 63.79 to 71.20 mN/m, inks could present the best print performance. At 60 °C, prepared P(St-NMA) microsphere inks were good for printing to obtain patterned photonic crystals with regular arrangement and beautiful structural colors. Specifically, photonic crystals with different colors could be constructed by regulating the diameter of microspheres in inks, and prepared structural colors exhibited distinct iridescent phenomenon. The present results could provide a theoretical basis for the industrial realization of patterned photonic crystals by ink-jet printing technology.     

Formulating Pantone colors by unused base inks,formulation software,and a spectrophotometer

Unused base inks that are not going to be used for printing production are considered to be hazardous materials. Their disposal is expensive, and strict environmental regulations should be followed for their disposal. As an alternative, this article describes how spectral data of unused base inks can be gathered and mixed to generate new colors to incorporate them back to print production for small‐volume jobs. In this study, 30 different Pantone colors were selected as target colors. The CIE L*a*b* spectral data of Pantone colors and unused base inks were gathered via a spectrophotometer. A commercial formulation software, based on multiflux theory and CIE L*a*b* color space, was used to formulate ink recipes that contained the base inks. To quantify the performance of ink recipes, they were mixed and printed using an offset printability tester. The CIELAB ΔE*_ab metric, developed by CIE, was used to detect the visual differences between the target Pantone Color and printed colors.     

Mechanically Robust,Ultraelastic Hierarchical Foam with Tunable Properties via 3D Printing

A mechanically robust, ultraelastic foam with controlled multiscale architectures and tunable mechanical/conductive performance is fabricated via 3D printing. Hierarchical porosity, including both macro‐ and microscaled pores, are produced by the combination of direct ink writing (DIW), acid etching, and phase inversion. The thixotropic inks in DIW are formulated by a simple one‐pot process to disperse duo nanoparticles (nanoclay and silica nanoparticles) in a polyurethane suspension. The resulting lightweight foam exhibits tailorable mechanical strength, unprecedented elasticity (standing over 1000 compression cycles), and remarkable robustness (rapidly and fully recover after a load more than 20 000 times of its own weight). Surface coating of carbon nanotubes yields a conductive elastic foam that can be used as piezoresistivity sensor with high sensitivity. For the first time, this strategy achieves 3D printing of elastic foam with controlled multilevel 3D structures and mechanical/conductive properties. Moreover, the facile ink preparation method can be utilized to fabricate foams of various materials with desirable performance via 3D printing.     

The use of natural (Pinus pinaster) resin in the production of printing ink and the printability effect

Alkyd resins are generally used in the production of printing inks. All industries look for alternative raw materials in the production of ink with the growing inclination toward using natural products. Resins forming the vehicle of the ink to be obtained from natural resources will provide benefits for the environment, nature, and living creatures. The aim of the study was to promote the use of natural resin in the ink system. Natural Pinus pinaster resin was added into vegetable and mineral oil-based solvents in pure form with alkyd resin in different amounts and ink varnishes of different combinations were prepared. Then, printing inks were produced from these varnishes in pure and hybrid form. Following the assessment of the rheological properties of the inks prepared, printing tests were conducted to assess the printing quality parameters. Ideal mixing ratios of the natural resins in the ink were determined for printability. The environmental importance and advantages of the use of natural resins were discussed. Recommendations were given in line with the results to encourage widespread use of natural resins in near future.     

Characterization and optimization of color attributes chroma (C*) and lightness (L*) in offset lithography halftone print on packaging boards

The outcome of a print in production run plays a crucial role in commercial and packaging printing. In the growing packaging industry, colorfulness and saturated prints with high chroma attract the eye of the consumer. The design and layout of a packaging carton comprise of images that consist of halftones in the print process, which demand attractiveness and visibility using bright colors. In this research, an effort has been made to identify and analyze various parameters involved in offset lithography affecting color attributes of prints. This study also focused on the investigation of the best process conditions that would yield optimum color values through multiresponse factors such as chroma and lightness. A general full-factorial Design of Experiments (DOE) approach was used to evaluate the effect of prepress parameters such as screen ruling and dot shape and press parameters such ink viscosity and paper smoothness. These parameters were then optimized using a customized response surface design. From the experiment, it was observed that viscosity of the ink was a significant factor that majorly controls the color attributes. The surface smoothness of the paperboard was one of the factors influencing the improvement of color reproduction. A smoother surface makes even contact during ink transfer in the offset printing machine and hence reflects color with a higher chroma. The optimum parameters were as follows: 15 Pa s ink viscosity, 0.77 μm paper smoothness, and 200 lines per inch (lpi) screen ruling that resulted in increasing chroma (C*) in the middle and shadow tones in the halftones.     

水基银纳米线导电墨水和大尺寸柔性透明导电薄膜的制备

以银纳米线(AgNW)为导电材料,添加羟丙基甲基纤维素(HPMC)和氟碳表面活性剂FSO-100制备了水基导电墨水,使用迈耶棒在聚对苯二甲酸乙二醇酯(PET)膜表面刮涂制备了柔性透明导电薄膜,研究了AgNW、HPMC和FSO-100等组分的添加量对透明导电薄膜光电性能的影响。结果表明,表面活性剂FSO-100可以明显提高导电墨水对PET衬底的润湿性,但过量后会使方块电阻上升;HPMC的加入可以消除AgNW的团聚,但过多的HPMC会提高薄膜的方块电阻;AgNW含量增加后,薄膜的方块电阻和透过率均随之下降,在AgNW浓度2.6 mg/mL时,透明导电薄膜的方块电阻为12Ω/sq和550 nm的透明导电薄膜透过率为94.02%,品质因子可达448.63,薄膜的粗糙度均方根为7.28 nm,并可在1000次弯折后保持光电性能不变,在可穿戴器件、柔性有机发光二极管等领域有很大的应用前景。