Effect of PAN-based and pitch-based carbon fibres on microstructure and properties of continuous Cf/ZrB2-SiC UHTCMCs

In this paper the microstructure and mechanical properties of two different C_f/ZrB₂-SiC composites reinforced with continuous PyC coated PAN-derived fibres or uncoated pitch-derived fibres were compared.Pitch-derived carbon fibres showed a lower degree of reaction with the matrix phase during sintering compared to PyC/PAN-derived fibres. The reason lies in the different microstructure of the carbon. The presence of a coating for PAN-derived fibres was found to be essential to limit the reaction at the fibre/matrix interface during SPS. However, coated bundles were more difficult to infiltrate, resulting in a less homogeneous microstructure.As far as the mechanical properties are concerned, specimens reinforced with coated PAN-derived fibres provided higher strengths and damage tolerance than uncoated pitch-derived fibres, due to the higher degree of fibre pull-out. On the other hand, the weaker fibre/matrix interface resulted in lower interlaminar shear, off-axis strength and ablation resistance.     

Modification of the wood-plastic composite for enhancement of formaldehyde clearance and the 3D printing application

As the formaldehyde is one of the main indoor pollutants, the purpose of this study is to effectively remove indoor formaldehyde pollution by using environmentally friendly 3D printing ornaments. The wood 3D printing filaments cellulose/polylactic acid composite (Cellu/P) was selected as the starting material, and 3-aminopropyltriethoxysilane (APTES) was used for chemical modification to obtain a series of cellulose composite materials with amino groups. The modified composite materials (APTES@Cellu/P) were characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscope, energy dispersive spectroscopy, thermogravimetric analysis, and mechanical tests, and a formaldehyde removal experiment was performed. The feasibility of 3D printing was evaluated, and the process of 3D printing-functionalized customized ornaments was proposed, and then a school emblem was used for modeling, printing, and surface modification. Compared with the commercially traditional activated carbon, 3D printing-customized ornaments of APTES@Cellu/P material has a better formaldehyde removal effect, and can even avoid the secondary pollution that is common to the activated carbon.     

木质纤维与水泥共同改良软土的力学性能与微观机制分析

通过压实试验、无侧限抗压强度试验和劈裂试验,分析不同木质纤维含量、水泥含量和固化时间对软土力学性能的影响规律,探讨木质纤维、水泥改良软土的微观机制。结果表明,木质纤维的加入对水泥改良软土的击实特性有显著的影响;木质纤维与水泥可有效改善土体的抗压和劈裂抗拉强度,随着木质纤维含量的增加,改良土的抗压和劈裂抗拉强度呈现出明显的“驼峰”现象,并在木质纤维含量为0.25%时最大;木质纤维与水化产物、软土颗粒形成互锁效应,增大了改良土的摩擦力,同时木质纤维还承担一定的拉伸强度,使改良土的劈裂强度增加。     

非常规蛋白基木材胶黏剂研究现状及发展前景

介绍了动物和植物型非常规蛋白资源的种类及其制备蛋白基木材胶黏剂的研究现状和存在的问题,展望了非常规蛋白胶黏剂的发展前景。     

Oak wine barrel as an active vessel: A critical review of past and current knowledge

ABSTRACT

We review the role of the oak barrel as an active vessel for wine maturation. We present a historical background to highlight that previously established aspects of processes occurring with wine inside the oak barrel are still without confirmation. We argue that recently published new findings on the topic are determining factors in defining the manner in which the oak barrel works with wine. Several studies have been published reviewing how the wine barrel functions as an active vessel that releases chemical compounds into the wine, improving its physical, chemical, and sensory properties. Nevertheless, there are hardly any studies that describe how a wine barrel functions as an active vessel. The present review details the main factors affecting the gas exchange capacity of the barrel, such as the pressure drop generated within the barrel, the formation of a headspace, the effect of wood anatomy, the different oxygen entry routes, the role of wood moisture content and soluble ellagitannins, and the effect of barrel toasting on cooperage. Finally, a hypothesis is proposed regarding the function of the barrel as an active vessel, which determines the manner in which it interacts with the wine that it contains during aging.     

Soluble dietary fibres from sugarcane bagasse

Soluble dietary fibres from sugarcane bagasse were extracted under alkaline conditions and characterised. Precipitated fibres were dialysed, and the fibre composition was evaluated before and after the dialysis step. Compositional analysis indicated that the fibres both before and after dialysis consisted of 39% w/w total sugars, 16% w/w protein, 10% w/w Klason lignin and 30% w/w ash. Xylose was the main neutral sugar followed by arabinose with glucose, galactose and uronic acids also present in all samples. The structural properties were also spectroscopically examined, which confirmed the presence of arabinoxylans. Macromolecular characterisation revealed that molecular weight is reduced after dialysis, indicating that a range of dietary fibres with different macromolecular characteristics may be obtained depending on the specific processing steps. The present work shows that soluble arabinoxylans may be obtained from sugarcane agricultural wastes that may be used as a source of novel dietary fibres.     

Electrical conductivity of the graphene nanoplatelets coated natural and synthetic fibres using electrophoretic deposition technique

Herein, electrically conductive natural and synthetic yarns through electrophoretic deposition (EPD) technique were fabricated. A parametric study on the conductivity enhancement of the yarns is carried out by Taguchi method. Using this method, the desirable conditions are determined by studying the effects of important parameters on the electrical conductivity of the yarns in the EPD coating process. Based on the L₁₈ design of experiments table, the preferred combination of factors to obtain the highest electrical conductivity of the yarns is found by Taguchi analysis. In addition, the Pareto ANOVA analysis is conducted to identify the major contributing factors on the electrical conductivity of the yarns. Characterisation techniques, such as scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FTIR) in attenuated total reflectance (ATR) mode, and thermogravimetric analysis (TGA) are utilised for better understanding the microstructure and physical properties. When powered by only 3 V, the maximum temperature of a Joule heated conductive sample based on natural fibre yarns reached 102°C in less than 25 s.     

Fabrication of oriented electrospun cellulose nanocrystals–polystyrene composite fibers on a rotating drum

Nitrobenzene (CNC-1), trifluoromethyl benzene (CNC-2) modified and polystyrene-grafted (CNC-g) cellulose nanocrystals in polystyrene (PS)-N,N dimethylformamide (DMF) solutions were electrospun and collected as stretched and aligned fibers on a rotating drum. Scanning electron microscope pictures showed significant alignment in the case of unmodified and nitrobenzene-modified CNC-1/PS nanocomposite fibers once the linear speed of rotor reached to 15 m s⁻¹. Fiber diameter decrease was more strong with rotor speed increase in the case of trifluoromethyl benzene modified (CNC-2) and polystyrene-grafted (CNC-g) cellulose nanocrystals/PS systems. Dynamic mechanical analysis including storage and elastic modulus of electrospun-oriented fibers were performed on surface-modified and polymer-grafted CNC/PS samples. According to α transition peak, the increase in the glass-transition temperature with filler concentration was the highest in polymer-grafted CNC-g/PS composite fibers. It was due to the interpenetration of grafted polymer brushes and free polymer chains in continuous phase and resulted in restrictions of motions of polymer chains in the PS matrix. The elastic moduli of nitrobenzene (CNC-1) and trifluoromethyl benzene (CNC-2)-modified CNC-filled PS composite fibers agreed well with percolation model, which indicates the CNC–CNC interactions and network formation with an increase in concentration. Magnitude of the elastic modulus of polymer grafted CNC-g at 0.33 vol % in PS was significantly higher than the prediction from percolation theory. It was due the immobilized polymer chains around CNC-g particles. However, grafted polymer chains, at higher CNC concentrations acted like stickers among CNC particles and caused CNC agglomerates with entrapped free polystyrene from the matrix, thus caused a decrease in the elastic modulus. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48942.     

Poly(lactic acid)/pulp fiber composites: The effect of fiber surface modification and hydrothermal aging on viscoelastic and strength properties

Poly(lactic acid) (PLA)/kraft pulp fiber (30 wt%) composites were prepared with and without a coupling agent (epoxidized linseed oil, ELO, 1.5 wt%) by injection molding. The non-annealed composite samples, along with lean PLA, were exposed to two hydro-thermal conditions: cyclic 50% RH/90% RH at 23 and 50°C, both up to 42 days. The aging effects were observed by size exclusion chromatography, differential scanning calorimetry, dynamic and tensile mechanical analysis, and fracture surface imaging. ELO temporarily accelerated the material's internal transition from viscous to an increasingly elastic response during the aging at 50°C. ELO also slowed down the tensile strength reduction of the composites at 50°C. These observations were explained with the hydrophobic ELO molecules' coupling and plasticizing effects at fiber/matrix interfaces. No effects were observed at 23°C.     

Compressive failure of hybrid multidirectional fibre-reinforced composites

In this paper, the hybridisation of multidirectional carbon fibre-reinforced composites as a means of improving the compressive performance is studied. The aim is to thoroughly investigate how hybridisation influences the laminate behaviour under different compression conditions and thus provide an explanation of the “hybrid effect”. The chosen approach was to compare the compressive performance of two monolithic carbon fibre/epoxy systems, CYTEC HTS/MTM44-1 and IMS/MTM44-1, with that of their respective hybrids. This was done by keeping the same layup throughout ((0/90/45/−45)_2S) while replacing the angle plies in one case or the orthogonal plies in the other case with the second material, thus producing two hybrid systems. To investigate the compressive performance of these configurations, compact and plain compression test methods were employed which also allowed studying the sensitivity of compressive failure to specimen geometry and loading conditions. The experimental results and the subsequent fractographic analysis revealed that the hybridisation of selective ply interfaces influenced the location and severity of the failure mechanisms. Finally, in light of this knowledge, an update of the generic sequence of events, previously suggested by the authors, which lead to global fracture in multidirectional fibre-reinforced composites under compression is presented.