Direct ink writing of vancomycin-loaded polycaprolactone/ polyethylene oxide/ hydroxyapatite 3D scaffolds

Novel inks were formulated by dissolving polycaprolactone (PCL), a hydrophobic polymer, in organic solvent systems; polyethylene oxide (PEO) was incorporated to extend the range of hydrophilicity of the system. Hydroxyapatite (HAp) with a weight ratio of 55–85% was added to the polymer-based solution to mimic the material composition of natural bone tissue. The direct ink writing (DIW) technique was applied to extrude the formulated inks to fabricate the predesigned tissue scaffold structures; the influence of HAp concentration was investigated. The results indicate that in comparison to other inks containing HAp (55%, 75%, and 85%w/w), the ink containing 65% w/w HAp had faster ink recovery behavior; the fabricated scaffold had a rougher surface as well as better mechanical properties and wettability. It is noted that the 65% w/w HAp concentration is similar to the inorganic composition of natural bone tissue. The elastic modulus values of PCL/PEO/HAp scaffolds were in the range of 4–12 MPa; the values were dependent on the HAp concentration. Furthermore, vancomycin as a model drug was successfully encapsulated in the PCL/PEO/HAp composite scaffold for drug release applications. This paper presents novel drug-loaded PCL/PEO/HAp inks for 3D scaffold fabrication using the DIW printing technique for potential bone scaffold applications.     

汉江上游干支流沉积物细菌群落多样性和影响因素

为了解汉江上游干支流沉积物细菌多样性以及确定性过程和随机性过程在沉积物细菌群落构建过程中的相对重要性,基于Illumina高通量测序技术,分析了环境因子对细菌群落组成的影响,采用非度量多维尺度(NMDS)排序探究了季节之间沉积物细菌群落的差异,并结合中性群落模型和标准化随机率量化了确定性过程和随机过程对群落构建的影响。结果表明:汉江上游及其支流细菌群落主要由变形菌门(Proteobacteria)、拟杆菌门(Bacteroidetes)、蓝藻门(Cyanophyta)、浮霉菌门(Planctomycetes)和酸杆菌门(Acidobacteria)等组成；细菌群落在不同季节有显著差异；地理距离和环境因子对细菌群落结构影响较小,确定性过程并未在细菌群落组成中起到主导作用；随机过程很大程度上影响了群落在秋季和春季的组成,是沉积物细菌群落构建的主导因素。     

Electrochemical Quantification of Neurotransmitters in Single Live Cell Vesicles Shows Exocytosis is Predominantly Partial

Exocytosis plays an essential role in the communication between cells in the nervous system. Understanding the regulation of neurotransmitter release during exocytosis and the amount of neurotransmitter content that is stored in vesicles is of importance, as it provides fundamental insights to understand how the brain works and how neurons elicit a certain behavior. In this minireview, we summarize recent progress in amperometric measurements for monitoring exocytosis in single cells and electrochemical cytometry measurements of vesicular neurotransmitter content in individual vesicles. Important steps have increased our understanding of the different mechanisms of exocytosis. Increasing evidence is firmly establishing that partial release is the primary mechanism of release in multiple cell types.     

Improvement of a commercial calcium phosphate bone cement by means of drug delivery and increased injectability

Calcium phosphate cements (CPCs) have been increasingly used as synthetic bone substitutes for repair and regeneration of bone defects given their biocompatibility, resemblance to bone and malleability. Moreover, their use as local antibiotic delivery systems is of main interest against bone infections, avoiding the adverse effects of high dosages of conventional therapy. The main goals of this work were to improve the properties of a commercial CPC (Neocement®), turning it injectable, and to provide it with a new functionality as a drug delivery system able to ensure a sustained release of an antibiotic commonly used in orthopaedics (gentamicin sulphate, GS). For this, the influence of the liquid phase amount (%LP) and type of polymer contained in the formulation (chitosan, Chi, or hydroxypropyl methylcellulose, HPMC) on the basic properties of the material was evaluated. It was found that the formulation containing 42%LP + HPMC+1.87% wt GS was the best one. It showed suitable setting and mechanical properties, and injectability around 87% (much superior to the original Neocement®, with 31%). It ensured a sustained release of GS for at least 14 days, at antibacterial levels. The antibiotic released is highly effective against S. epidermidis, but also presents some antibacterial activity against S. aureus. The CPC revealed to be non-cytotoxic. Moreover, it demonstrated good flowability and connectivity with human cadaveric trabecular bone.     

A comparative study on pyrolysis reactivity and gas release characteristics of biomass and coal using TG-MS analysis

Pyrolysis reactivity and gas release characteristics of biomass and coals were comparatively investigated using TG-MS. In addition, chemical compositions and structures of tested samples were determined to correlate pyrolysis gas release characteristic. It was found that pyrolysis reactivity and gaseous product release were hardly varied with pyrolysis heating rate. Furthermore, pyrolysis rates of two biomass samples were greater than those of coals, which were mainly attributed to the chemical compositions and the gaseous product evolution process. The result also showed that gaseous product release during pyrolysis process was related to the presence of different functional groups in samples.     

高地压严重突出区域下向穿层钻孔预抽消突技术

利用工作面高抽巷施工掩护顺槽掘进工作面下向穿层条带预抽钻孔,通过对钻场底板深、浅孔注浆封堵围岩裂隙解决了孔内返水不畅难题;采取了"两堵一注"封孔方式确保封孔严密不漏气;孔内全程下吹水管,实现了单孔、分组、定时吹水工作目标,提高了下向消突钻孔抽采效果,形成了一套高效、快速的下向穿层钻孔消突管理模式,实现了高地压严重突出区域煤层高效消突以及技术经济一体化目标,安全经济效益显著。     

多泥沙河流水电站水轮机转轮内部流动数值模拟

针对多泥沙水电站水轮机转轮的泥沙磨损问题,以HLA351-LJ-275水轮机为模型,对水轮机在设计工况下,运用N-S方程和标准κ-ε湍流模型,利用CFX求解器进行仿真流动模拟。水轮机转轮进口沿叶高20%、50%、80%流面的压力、泥沙速度及泥沙体积分数分布的数值结果表明,水轮机转轮叶片工作面压力大于背面且最小压力高于气化压力。泥沙速度在叶片进水边和出水口位置普遍较高。水轮机转轮叶片工作面的泥沙体积分数大于背面,叶片工作面的泥沙体积分数在叶片出水口普遍较高,叶片背面的泥沙体积分数在叶片进水边普遍较高。研究结果对多泥沙河流水轮机转轮叶片的泥沙磨损评估及维修具有指导意义。     

A New Design Methodology for Time-Based Capacitance-to-Digital Converters (T-CDCs)

This paper introduces a 9-bit time-based capacitance-to-digital converter (T-CDC). This T-CDC adopts a new design methodology for parasitic cancellation with a simple calibration technique. In T-CDCs, the input sensor capacitance is first converted into a delay pulse using a capacitance-to-time converter (CTC) circuit; then this delay signal is converted into a digital code through a time-to-digital converter (TDC) circuit. A prototype of the proposed T-CDC is implemented in UMC 0.13 μm CMOS technology. This T-CDC consumes 8.42 μW and achieves a maximum SNR of 45.14 dB with a conversion time of 1 μs that corresponds to a figure of merit (FoM) of 16.4 fJ/Conv.     

基于高分一号遥感卫星的渤海湾悬浮泥沙时空分布反演

悬浮泥沙是评价II类水体水质的重要参数之一,近海岸水域悬浮泥沙对重金属、营养盐等具有一定的吸附作用,悬浮泥沙的分布特征在一定程度上反映着污染物的迁移和循环,因此研究悬浮泥沙对渤海湾建设和环境保护具有重要意义。为探究渤海湾水域悬浮泥沙浓度 和分布的变化特征,利用高分一号多光谱卫星影像,通过采用波段组合的方式对悬浮泥沙含量指数反演提取,反演得到2019年9个月的渤海湾悬浮泥沙指数,分析发现渤海湾悬浮泥沙含量在冬季受季风影响较高,春季和夏季的时候渤海湾高浓度悬浮泥沙向近岸收缩,秋季 悬浮泥沙分布格局有正在向冬季过渡的趋势,本文研究可为渤海湾的生态环境保护和工业开发提供重要的科学依据和参考价值。     

下荆江熊家洲至城陵矶弯曲型河段河床调整规律

三峡水库运用后, 坝下游水沙过程发生了较大调整, 对下荆江熊家洲至城陵矶弯曲型河段河床冲淤演变造成较大影响, 从而对本河段河势稳定、防洪、航运等可能造成不利的影响, 基于此, 根据最新实测资料分析水沙条件变 化及其对本河段河床调整规律的影响。研究成果显示: 三峡水库运用后, 水流含沙量大幅减小, 且水库调蓄导致熊 家洲至城陵矶河段在枯水期径流量明显增加, 使弯道主流长期偏向于凸岸, 引起凸岸边滩大幅冲刷, 这是近期该河段发生“撇弯切滩”的主要原因之一; 随着三峡上游干支流水库群陆续建成运用, 坝下游河道将会长期遭受清水冲 刷, 河床仍将呈单向冲刷下切的趋势, 弯顶段主流平面摆动仍将较大, 弯道顶冲点也将相应下移, 导致主流贴岸距离 进一步下延, 引起河道岸线的崩退, 未来一段时期内典型弯曲型河道的局部河势变化仍将明显。