地表径流速度对城市内涝影响规律

为分析地表径流速度对城市内涝的影响,采用一维地下排水管网与二维城区地形的动态耦合模型,选取大连市某排水区块作为研究区域,设置4种地表径流速度10种设计降雨场景,模拟分析在不同重现期设计降雨及不同地表径流速度下研究区的内涝积水特性。结果表明:随着地表径流速度降低,管道排水压力变小,管道排水达标率最高可提升48.05%,且降雨重现期越短,地表径流流速对管道排水压力的削减效果越明显;地表径流流速对检查井溢流量影响显著,随着地表径流速度降低,检查井溢流量峰值最高可减小2 750 m~3,峰现时间最长可滞后56 min,同时随着降雨重现期增长,地表径流流速对检查井溢流量的削减效果减弱;研究区低、高风险区淹没面积随地表径流速度降低,最高可分别减小1.64万、8.37万m~2,但中风险区淹没面积变化反复。     

Laboratory Studies to Determine Suitable Chemicals to Improve Oil Recovery from Garzan Oil Field

Garzan oil field is located at the south east of Turkey. It is a mature oil field and the reservoir is fractured carbonate reservoir. After producing about 1% original oil in place (OOIP) reservoir pressure started to decline. Waterflooding was started in order to support reservoir pressure and also to enhance oil production in 1960. Waterflooding improved the oil recovery but after years of flooding water breakthrough at the production wells was observed. This increased the water/oil ratio at the production wells. In order to enhance oil recovery again different techniques were investigated. Chemical enhanced oil recovery (EOR) methods are gaining attention all over the world for oil recovery. Surfactant injection is an effective way for interfacial tension (IFT) reduction and wettability reversal. In this study, 31 different types of chemicals were studied to specify the effects on oil production. This paper presents solubility of surfactants in brine, IFT and contact angle measurements, imbibition tests, and lastly core flooding experiments. Most of the chemicals were incompatible with Garzan formation water, which has high divalent ion concentration. In this case, the usage of 2-propanol as co-surfactant yielded successful results for stability of the selected chemical solutions. The results of the wettability test indicated that both tested cationic and anionic surfactants altered the wettability of the carbonate rock from oil-wet to intermediate-wet. The maximum oil recovery by imbibition test was reached when core was exposed 1-ethly ionic liquid after imbibition in formation water. Also, after core flooding test, it is concluded that considerable amount of oil can be recovered from Garzan reservoir by waterflooding alone if adverse effects of natural fractures could be eliminated.     

聚类混合型数据的密度峰值改进算法

聚类混合型数据，通常是依据样本属性类别的不同分别进行评价。但这种将样本属性划分到不同子空间中分别度量的方式，割裂了样本属性原有的统一性；导致对样本个体的相似性评价产生了非一致的度量偏差。针对这一问题，提出以二进制编码样本属性，再由海明差异对属性编码施行统一度量的新的聚类算法。新算法通过在统一的框架内对混合型数据实施相似性度量，避免了对样本属性的切割，在此基础上又根据不同属性的性质赋予其不同的权重，并以此评价样本个体之间的相似程度。实验结果表明，新算法能够有效地聚类混合型数据；与已有的其他聚类算法相比较，表现出更好的聚类准确率及稳定性。     

非平稳条件下基于贝叶斯网络的内涝风险评估和管理方法

受非平稳条件因素(如气候变化、城市化)的影响,近几年内涝灾害频发。以Z市某地块为研究区域,借助地理信息系统(ArcGIS)和暴雨雨洪管理模型(SWMM)实现研究区排水管网的水动力模拟。在不同降雨情境下,比较分析现状系统及不同改造方案下的系统溢流量等信息,计算内涝风险指数。采用贝叶斯网络分析工具(Bayes Server)对引发内涝风险的主要因素进行推理、识别和分析,进而构建内涝风险评估模型。该模型便于决策者根据设计需求,结合各因素的不确定性范围和发生概率值,综合选取最适合的改造措施,优化市政排水防涝规划,为市政基础设施建设提供了依据。     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

暗纹东方鲀鱼精蛋白的纯化及抑菌活性研究

采用葡聚糖凝胶(Sephadex G-50)层析和羧甲基琼脂糖凝胶FF(CM Sepharose Fast Flow)离子交换层析对暗纹东方鲀鱼精蛋白进行纯化,利用精氨酸显色反应鉴定鱼精蛋白,并测定了鱼精蛋白对金黄色葡萄球菌、大肠杆菌和沙门氏菌的最小抑菌浓度、抑菌圈直径和生长曲线的影响。结果表明,暗纹东方鲀鱼精蛋白在217,273nm处各有1个吸收峰且217nm处的吸收峰较高,经SDS-PAGE电泳发现纯化后的鱼精蛋白白条带较纯化前的细且无拖尾现象;暗纹东方鲀鱼精蛋白对革兰氏阴性菌(沙门氏菌和大肠杆菌)和革兰氏阳性菌(金黄色葡萄球菌)均具有抑制作用,可以延缓菌种的生长,对金黄色葡萄球菌、大肠杆菌和沙门氏菌的最小抑菌浓度分别为500,1 000,1 000mg/L。     

重力注水过程流动不稳定现象关键影响因素研究

重力驱动注水过程中由于流量较小以及蒸汽的积聚可能导致流动不稳定现象的发生，对核反应堆安全运行具有重要的影响。通过实验研究的方法，搭建了重力注水模拟实验装置，研究了不同蒸汽出口形阻、高位储水箱水位和加热棒初始温度下流动不稳定现象的变化规律。结果表明，重力驱动注水过程流动不稳定现象包含冷却水初次注入阶段、注入水逐出阶段和冷却水再注入阶段等。在一定冷却水初始温度、冷却水入口形阻以及系统压力下，蒸汽排出速度以及实验本体内筒顶部的聚集情况取决于蒸汽出口形阻，减小蒸汽出口形阻可加快蒸汽排放速度，压力峰峰值降低、振荡周期变长，有利于系统稳定；提高高位储水箱水位加快了冷却水注入速率，增加了加热棒被淹没率，降低了流动不稳定现象的发生次数和持续时间；随加热棒初始温度的升高，冷却水流量出现了波动向停滞的转变，流动不稳定现象发生的次数增加且持续时间加长。     

汽轮机运行调节方式优化策略探析

分析了汽轮机的喷嘴调节、节流调节、旁通调节、定压调节和滑压调节等几种基本调节方式的特点,指出现役燃煤火电机组多因调节方式单一而普遍存在着调峰能力不足、负荷响应迟缓以及因长期偏离设计工况致使运行安全经济性下降等诸多问题,提出了通过调节方式的优化组合,采用(节流)定压-滑压-(喷嘴)定压-旁通调节的复合调节方式,以实现煤电机组安全、经济、灵活、快速地参与电网的深度调峰,破解具有强随机波动性的新能源电量规模化并网的困境。     

节理峰前剪切刚度软化模型及其影响因素分析

节理峰前剪切应力-位移曲线是研究节理剪切行为的重要内容。然而目前对于节理峰前剪切行为大多以线性描述,不能较好的描述非线性的特点。对于非线性的描述也仅仅是唯象描述剪切应力-位移曲线,未能反映影响模型的参数物理意义及影响因素。以峰前节理刚度软化行为为出发点,采用归一化的思想将节理剪切刚度与位移无量纲化,用双曲线函数表示出剪切刚度与位移之间的关系。提出了考虑刚度软化的峰前剪切本构关系,通过与试验结果对比验证了本构关系的合理性。影响该模型最重要的两个因素是初始剪切刚度与峰值剪切位移。以Greenwood和Williamson模型为基础在细观上探讨了初始剪切刚度的影响因素;抓住法向应力与节理粗糙度主要因素,探讨了影响峰值剪切位移的影响因素。对模型参数的研究有助于进一步阐明节理峰前剪切机理。