Wear and Failure Analysis of Semi-Autogenous Grinding Mill Liners

Journal of Failure Analysis and Prevention - The wear and failure analysis of shell liners of a grinding mill is investigated. Metallurgical and tribological studies were conducted on the worn...     

Output feedback controller for polytopic systems exploiting the direct searching of the design space

This paper deals with the problem of designing a robust static output feedback controller for polytopic systems. The current research that tackled this problem is mainly based on LMI method, which is conservative by nature. In this paper, a novel approach is proposed, which considers the design space of the controller parameters and iteratively partitions the space to small simplexes. Then, by assessing the stability in each simplex, the solution space for design parameters is directly determined. It has been theoretically proved that, if there exists a feasible solution in the design space, the algorithm can find it. To validate the result of the proposed approach, comparative simulation examples are given to illustrate the performance of the design methodology as compared to those of previous approaches.     

Accelerating protein release from microparticles for regenerative medicine applications

There is a need to control the spatio-temporal release kinetics of growth factors in order to mitigate current usage of high doses. A novel delivery system, capable of providing both structural support and controlled release kinetics, has been developed from PLGA microparticles. The inclusion of a hydrophilic PLGA–PEG–PLGA triblock copolymer altered release kinetics such that they were decoupled from polymer degradation. A quasi zero order release profile over four weeks was produced using 10% w/w PLGA–PEG–PLGA with 50:50 PLGA whereas complete and sustained release was achieved over ten days using 30% w/w PLGA–PEG–PLGA with 85:15 PLGA and over four days using 30% w/w PLGA–PEG–PLGA with 50:50 PLGA. These three formulations are promising candidates for delivery of growth factors such as BMP-2, PDGF and VEGF. Release profiles were also modified by mixing microparticles of two different formulations providing another route, not previously reported, for controlling release kinetics. This system provides customisable, localised and controlled delivery with adjustable release profiles, which will improve the efficacy and safety of recombinant growth factor delivery.     

Fabrication of self-ordered nanoporous alumina with 500–750 nm interpore distances using hard anodization in phosphoric/oxalic acid mixtures

A hard anodization (HA) technique is employed using different mixtures of phosphoric/oxalic acid for fast fabrication of alumina nanopore arrays in voltages higher than 200 V. The mixtures enable to avoid the breakdown of porous anodic alumina (PAA) in the high voltages. It is revealed for the first time that continuously tunable pore intervals (D_int) from 500 to 750 nm can be controlled by varying the concentrations of oxalic acid at anodization voltages (U_anod) from 230 to 360 V, far beyond the U_anod in the single electrolyte of phosphoric acid or oxalic acid. The ratios of interpore distance, pore diameter and barrier layer thickness to anodization voltage are in the range of conventional HA process for each acid mixture. In this approach, the PAA film growth rate is 26 µm/h, being 7 times larger than that in typical mild anodization.     

Viscoelastic behavior of epoxy/carbon fiber/Zno nano‐rods hybrid composites

The insufficient viscoelastic resistance of fiber reinforced plastics can be retrofitted by the addition of more rigid nano fillers to the polymer matrix. In this study, carbon fibers plies were grafted with zinc oxide (ZnO) nano‐rods and the hybridized reinforcement was utilized in laminated composites. Flexural creep tests were carried out using dynamic mechanical analysis (DMA) and the time/temperature superposition principle was employed for accelerated testing. To verify the applicability of TTPS, prolonged stress relaxation tests were also carried out in flexural mode. Data from the DMA flexural creep tests revealed that the whiskerization of carbon fibers with ZnO nano rods reduced the creep compliance by 23% at elevated temperatures and prolonged durations. Also, the relaxation data confirmed the applicability of TTPS to these hybrid composites. The stress relaxation modulus improved by 65% in comparison to composites based on neat carbon fibers. POLYM. COMPOS., 36:1967–1972, 2015. © 2014 Society of Plastics Engineer     

Investigations of the Failure in Boilers Economizer Tubes Used in Power Plants

In this study, failure of a high pressure economizer tube of a boiler used in gas-Mazut combined cycle power plants was studied. Failure analysis of the tube was accomplished by taking into account visual inspection, thickness measurement, and hardness testing as well as microstructural observations using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and x-ray diffraction (XRD). Optical microscopy images indicate that there is no phase transformation during service, and ferrite-pearlite remained. The results of XRD also revealed Iron sulfate (FeSO₄) and Iron hydroxide sulfate (FeOH(SO₄)) phases formed on the steel surface. A considerable amount of Sulfur was also detected on the outer surface of the tube by EDS analysis. Dew-point corrosion was found to be the principal reason for the failure of the examined tube while it has been left out-of-service.     

Preparation and characterization of P4MVPMnO4/SBA-15 as an efficient heterogeneous oxidant: An organic–inorganic hybrid polymer

This work is concerned about the preparation and characterization of MnO₄⁻ supported poly (4-methyl vinylpyridinium)/SBA-15 which was effectively employed as a heterogeneous oxidant for oxidation of aromatic alcohols. P4MVPMnO₄/SBA-15 exhibited excellent activity and selectivity under mild and solvent-less conditions.     

Numerical simulation of natural convection in an open-ended square cavity filled with porous medium by lattice Boltzmann method

In the present work, natural convection in an open-ended square cavity packed with porous medium is simulated. The double-population approach is used to simulate hydrodynamic and thermal fields, and the Taylor series expansion and the least-squares-based lattice Boltzmann method has been implemented to extend the thermal model. The effect of a porous medium is taken into account by introducing the porosity into the equilibrium distribution function and adding a force term to the evolution equation. The Brinkman–Forchheimer equation, which includes the viscous and inertial terms, is applied to predict the heat transfer and fluid dynamics in the non-Darcy regime. The present model is validated with the previous literature. A comprehensive parametric study of natural convective flows is performed for various values of Rayleigh number and porosity. It is found that these two parameters have considerable influence on heat transfer.