An analytical method for the analysis of trihalomethanes in ambient air using solid‐phase microextraction gas chromatography‐mass spectrometry: An application to indoor swimming pool complexes

A simple method for the collection and analysis of the four brominated and chlorinated trihalomethanes (THMs) in air samples is described. Ambient air samples were collected in pre‐prepared glass vials, with THM analysis performed using solid‐phase microextraction gas chromatography‐mass spectrometry, where the need for chemical reagents is minimized. Analytical parameters, including oven temperature program, solvent volume, incubation time, vial agitation, extraction time and temperature, as well as desorption time and temperature, were evaluated to ensure optimal method performance. The developed method allows for point‐in‐time quantification (compared to an average concentration measured over extended periods of time), with detection limits between 0.7 to 2.6 µg/m³. Excellent linearity (r² > 0.99), repeatability (3% to 11% RSD), and reproducibility (3% to 16% RSD) were demonstrated over a concentration range from 2 to 5000 µg/m³. The method was validated for the analysis of THMs in indoor swimming pool air and was used to investigate the occurrence of THMs in the air above 15 indoor swimming pools. This is the first study to report the occurrence of THMs in swimming pool air in Australia, and concentrations higher than those previously reported in other countries were measured.     

Hydrogen carriers: Production,transmission, decomposition,and storage

Recognizing the potential role of liquid hydrogen carriers in overcoming the inherent limitations in transporting and storing gaseous and liquid hydrogen, a complete production and use scenario is postulated and analyzed for perspective one-way and two-way carriers. The carriers, methanol, ammonia and toluene/MCH (methylcyclohexane), are produced at commercially viable scales in a central location, transmitted by rail or pipelines for 2000 miles, and decomposed near city gates to generate fuel-cell quality hydrogen for distribution to refueling stations. In terms of the levelized cost of H₂ distributed to the stations, methanol is less expensive to produce ($1.22/kg-H₂) than MCH ($1.35/kg-H₂) or ammonia ($2.20/kg-H₂). Levelized train transmission cost is smaller for methanol ($0.63/kg-H₂) than ammonia ($1.29/kg-H₂) or toluene/MCH system ($2.07/kg-H₂). Levelized decomposition cost is smaller for ammonia ($0.30–1.06/kg-H₂) than MCH ($0.54–1.22/kg-H₂) or methanol ($0.43–1.12/kg-H₂). Over the complete range of demand investigated, 10–350 tpd-H₂, the levelized cost of H₂ distributed to stations is aligned as methanol « ammonia ~ MCH. With pipelines at much larger scale, 6000 tpd-H₂, the levelized cost decreases by ~1 $/kg-H₂ for ammonia and MCH and much less for methanol. Methanol is a particularly attractive low-risk carrier in the transition phase with lower than 50-tpd H₂ demand.     

Proton Nuclear Magnetic Resonance-Based Method for the Quantification of Epoxidized Methyl Oleate

Epoxidized methyl esters (EMO) with their high oxirane ring reactivity, acts as a raw material in the synthesis of various industrial chemicals including polymers, stabilizers, plasticizers, glycols, polyols, carbonyl compounds, biolubricants etc. EMO has been generally quantified by the gas chromatography (GC) and high-performance liquid chromatography (HPLC) techniques. Taking into the account of the limitations of these techniques, two qHNMR-based equations have been proposed for the quantification of EMO in the mixture of EMO and methylesters (MO). The validity of the proposed method was determined using standard mixtures of MO and EMO having different molar concentrations. The developed equations have been applied on the samples of EMO prepared from oleic acid in two-step process viz., esterification followed by epoxidation. The qHNMR-based EMO quantification showed acceptable agreement with the results obtained from HPLC analysis.     

Transport Map sampling with PGD model reduction for fast dynamical Bayesian data assimilation

The motivation of this work is to address real-time sequential inference of parameters with a full Bayesian formulation. First, the proper generalized decomposition (PGD) is used to reduce the computational evaluation of the posterior density in the online phase. Second, Transport Map sampling is used to build a deterministic coupling between a reference measure and the posterior measure. The determination of the transport maps involves the solution of a minimization problem. As the PGD model is quasi-analytical and under a variable separation form, the use of gradient and Hessian information speeds up the minimization algorithm. Eventually, uncertainty quantification on outputs of interest of the model can be easily performed due to the global feature of the PGD solution over all coordinate domains. Numerical examples highlight the performance of the method.     

准噶尔盆地吉木萨尔凹陷陆相页岩油地质特征与聚集机理

综合利用岩心、测井、烃源岩热解、铸体薄片、场发射扫描电镜、激光共聚焦显微镜与高压压汞等分析测试的结果，对准噶尔盆地吉木萨尔凹陷芦草沟组陆相页岩油地质特征与聚集机理进行了研究。结果表明：吉木萨尔凹陷咸化湖盆型沉积地层富含有机质，是烃源岩层也是储层，页岩油藏具有“源储一体”的地质特征，存在粉砂岩类与泥岩类和白云岩类与泥岩类两类岩性组合类型。芦草沟组大面积整体含油、“甜点”富集且原油成熟度较低。页岩油赋存岩石的润湿性为亲油性，生烃增压是页岩油运聚的主要动力。微纳米孔喉、层理缝与构造裂缝形成页岩油的有利储集空间与渗流通道。页岩油整体为源内或近源聚集，并以游离态和吸附态赋存于芦草沟组“甜点”段与泥页岩层段中。     

Natural Silk Film for Magnesium Protection: Hydrophobic/Hydrophilic Interaction and Self‐Healing Effect

Biodegradable implants are required in order to provide successful treatment of injuries. Temporary magnesium‐based implants with particular properties are needed in cases when it is desirable not only to maintain vital activity, but also to initiate the self‐healing process of damaged bones or tissues as well. Unfortunately, the use of magnesium alloys is limited due to the fast biodegradability of the applied material. The aim of this research is to improve the corrosion resistance of magnesium alloys by sonochemical treatment in silk solution followed by additional layer‐by‐layer deposition of natural silk on the magnesium surface. The sonication process is carried out at a frequency of 20 kHz during 5–10 min, while the duration of the silk layer deposition is 15 min. The corrosion behavior of magnesium substrates modified by natural silk layer‐by‐layer assembly is studied. Magnesium substrates sonochemically treated in silk solution demonstrate three times better corrosion resistance compared to control samples sonochemically treated in water. Additional deposition of a silk layer enhances obtained corrosion resistance by 18 times, resulting in a 54‐fold increase overall.     

Room temperature R-curve and stable crack growth behaviour of ZrB2–SiC ceramic composites

ABSTRACT

R-curve and controlled stable crack growth behaviour of ZrB₂–17vol.-%SiC and ZrB₂–45vol.-%SiC ceramic composites was studied on V-notched samples using four-point bending at room temperature. The rising K_1R behaviour was determined as a function of the crack extension Δa with a crack bridging mechanism being dominant in such behaviour. Significant differences in crack growth rates were found within the same composition of ceramics simply as the crack length varied during crack growth processes. These differences are indicative of the significant influence of microstructural parameters of the ceramics on crack propagation. The peculiarities of stress intensity factor K₁ and the crack growth-specific behaviour in ZrB₂–SiC particulate ceramic composites are discussed.