Poly(4-styrenesulfonic acid) doped polypyrrole/tungsten oxide/reduced graphene oxide nanocomposite films based surface acoustic wave sensors for NO sensing behavior

Poly(4-styrenesulfonic acid) (PSSA) doped polypyrrole (PPy)/tungsten oxide (WO₃)/reduced graphene oxide (rGO) hybrid nanocomposite have been successfully synthesized using appropriate amounts of PSSA, pyrrole monomer, WO₃, and rGO dispersed in aqueous solution through in situ chemical oxidation polymerization. Here, a simple spin coating method was used to fabricate a nitric oxide (NO) gas sensor composed of the aforementioned nanocomposite on a surface acoustic wave (SAW) resonator. This sensor can detect NO gas at concentrations of 1–110 parts per billion (ppb) at room temperature in dry air, with a sensitivity of 12 Hz/ppb and response and recovery times of <2 min. Moreover, its limit of detection (LOD) is 0.31 ppb for a signal to noise ratio of 3. It demonstrates repeatability, fast response, and recovery at room temperature. Moreover, its sensory performance remains highly stable over 30 days with only a 6.3% decrease in sensitivity. In addition, the sensor is highly selective for NO, even when nitrogen dioxide, ammonia, and carbon dioxide are applied as interfering gases. The inclusion of rGO (with large specific surface area) and the synergic effect of n-type WO₃ nanoparticles in the p-type PPy matrix (leading to p-n heterojunction region formation) possibly underlie the efficient sensing performance of our sensor.     

Study of planar structure applying reciprocity technique combined with MGEC and analysis of discontinuity

The 3D structure electromagnetic computation presents several difficulties related to the volume mesh. In fact, the entire volume space must be taken into account even the smallest details. In this article, we propose a formulation based on the reciprocity theorem combined with the generalized equivalent circuit method to model a planar 3D structure with both coaxial and planar excitation. The major advantage of this formulation is the fact to reduce the computational volume into 2D ones in the discontinuity plane. In addition, we focused on the calculation of the discontinuity between the excitation source and the planar structure to determine the exact behavior of the electric coaxial excitation model. The obtained current density, electric field distributions, and the input impedance are presented and discussed in the following sections. An approximately good agreement of input impedance with those obtained by the simulator and measurement is shown.     

Design of switchable band‐notched frequency selective absorber

An active band‐notched frequency selective absorber (BNFSA) with switchable notch band is proposed in this article. The BNFSA is a two‐layer structure composed of a lossy layer at the top and a ground plane at the bottom, separated by an air spacer. The element of the lossy layer is a lumped‐resistor‐loaded metallic dipole with a parallel LC resonance structure, which is realized by complementary n‐shaped resonator (CnR) inserted in the center, and PIN diode is welded at two arms of CnR. The bias circuit printed on the back of the substrate of the lossy layer connects to anode and cathode of the diode by via hole and isolates by the inductor. Simulation results show that the notch bands are located at 4.50 and 6.81 GHz when the diode sets to ON and OFF, respectively. To validate the performance of switchable BNFSA, the prototypes are fabricated and measured, reasonable agreement between simulated and measured results is obtained.     

Investigation into eddy current pulsed thermography for rolling contact fatigue detection and characterization

This paper reports on the use of eddy current pulsed thermography (ECPT) for detection and characterization of rolling contact fatigue (RCF). Detection mechanisms with eddy currents and heat propagation effects were discussed with RCF modeled as a simple angled defect. Two different angled defects were studied through numerical simulations and experimentally by using uniform magnetic field (UMF) excited by Helmholtz coils. Finally, a rail sample with RCF defects was inspected using UMF excitation. It is shown that ECPT with UMF excitation provides an efficient and robust method to detect angled defects, compared with nonuniform magnetic field (NUMF) excitation.     

BHA轴向磁干扰对方位测量误差的影响——基于人工磁场模拟方法

井下钻具组合（BHA）磁化形成的轴向磁场干扰是定向组件磁方位测量的一个重要的误差因素。为了对该误差因素进行独立分析，建立了大型三轴亥姆霍兹线圈人工磁场系统作为研究环境，使用不同磁通量的多个磁化组件作为干扰源研究在理想环境中轴向干扰磁场对定向组件的影响，并在此基础上提出了一种估算磁化组件磁极强度和校正轴向干扰的方法，通过改变空间姿态和三轴亥姆霍兹线圈磁场强度，分析了在不同井斜角、方位角和磁倾角的井眼轨迹中，轴向磁干扰对定向组件方位测量误差的影响，最后证明了校正磁性组件的轴向干扰方法，可以有效地提升BHA定向组件的方位测量精度。     

The Investigation of the Fractional-View Dynamics of Helmholtz Equations Within Caputo Operator

It is eminent that partial differential equations are extensively meaningful in physics, mathematics and engineering. Natural phenomena are formulated with partial differential equations and are solved analytically or numerically to interrogate the system’s dynamical behavior. In the present research, mathematical modeling is extended and the modeling solutions Helmholtz equations are discussed in the fractional view of derivatives. First, the Helmholtz equations are presented in Caputo’s fractional derivative. Then Natural transformation, along with the decomposition method, is used to attain the series form solutions of the suggested problems. For justification of the proposed technique, it is applied to several numerical examples. The graphical representation of the solutions shows that the suggested technique is an accurate and effective technique with a high convergence rate than other methods. The less calculation and higher rate of convergence have confirmed the present technique’s reliability and applicability to solve partial differential equations and their systems in a fractional framework.     

A novel proposal for all optical 3 to 8 decoder based on nonlinear ring resonators

In this paper, a 3 to 8 optical decoder was proposed using nonlinear photonic crystal ring resonators. For realizing the 3 to 8 decoder, we combined seven 1 to 2 optical decoders. In the proposed structure, X, Y and Z serve as input ports. By combination of these ports, one can control which output port to be ON. The maximum time delay of the proposed structure is about 6?ps.     

Electromagnetic silicon MEMS resonator

We have fabricated a silicon MEMS resonator aiming at multimodal sensors, and evaluated vibration characteristics by electromagnetic drive and induced electromotive force detection. The resonance frequency of the driving voltage of 0.6 Vpp shows torsional vibration of approximately 87 kHz, and the resonance frequency is shifted toward the low‐frequency side as the driving voltage increases. Resonance characteristics due to temperature change and film stress were evaluated.