Shock/expansion fan interaction with real gas effects for Earth and Mars atmospheric conditions

Numerical simulations are performed to investigate the real gas effects on shock/expansion fan interaction. Initial perfect gas simulations at low enthalpy capture the flow structures efficiently and outcomes are found to have excellent agreement with the analytical calculations. Furthermore, the simulations with the real gas solver for different enthalpies showed that the variation in enthalpy significantly changes the flow structures. It is observed that an increase in enthalpy leads to a decrease and increase in the postshock and postexpansion fan Mach numbers, respectively. Another important observation is the decrement in the peak pressure ratio with an increment in the enthalpy. These effects are noted to be more pronounced for Mars's environment due to the higher dependency of specific heat on temperature.     

基于MF-DCCA 的呼吸道疾病与大气污染物相关性分析

针对呼吸道系统疾病与大气 PM2:5、 SO2 浓度序列的相关性特征, 应用多重分形消除趋势波动分析法 (MF-DCCA), 对张家界市永定区呼吸道系统疾病患病人数与大气 PM2:5、 SO2 浓度序列进行了研究。结果发现该地区 呼吸道系统疾病患病人数与大气 PM2:5、 SO2 浓度的相关性具有长期持续特征和多重分形特征。随后对它们相关性 多重分形特征的动力来源进行了分析, 通过随机重排和相位随机处理, 结果表明在不同时间尺度上的长期持续性影响 是其主要动力来源。进一步研究发现该地区呼吸道系统疾病与大气 PM2:5、 SO2 浓度序列的相关性在四个季节均具 有长期持续性的多重分形特征, 且夏季多重分形特征相对强于其他季节。     

Evaluation of atmospheric galvanic aluminum corrosion in electrical transmission towers at different sites in the Valparaíso region,Chile. Wire-on-Bolt Test (CLIMAT)

This study evaluates environmental aggressiveness and atmospheric galvanic corrosivity categories in Chile (Classification of Industrial and Marine ATmospheres test) by installing bolts in electrical transmission towers in the Valparaiso region across four exposure sites: Playa Ancha, San Sebastián, Las Vegas, and San Felipe. Classifications of marine corrosion index (MCI), industrial corrosion index (ICI), and atmospheric corrosion index (ACI) used different galvanic couples: aluminum/steel for MCI, aluminum/copper for ICI, and aluminum/polyethylene for ACI. Corrosion indices varied by season (summer, autumn, winter, and spring), for which couples were exchanged every 3 months. Intraseason variation depended mainly on the meteorochemical variables of the zone, the Cl⁻/SO₂ ratio, and the presence of general and pitting corrosion in the aluminum. The results indicate that, regardless of environmental condition, the aluminum in Al/steel (MCI) and Al/copper (ICI) couples presented a higher corrosion rate than when not forming a galvanic couple (ACI). Moreover, under higher environmental chloride, these differences increase. The Playa Ancha station presented the highest ACI.     

On optical flow techniques applied to breaking surges

Surface wave breaking is a challenging two-phase flow process which plays an important role in numerous physical processes. A highly-turbulent unsteady breaking surge was investigated experimentally in a large facility, and substantial aeration occurred in the roller. The application of three optical flow techniques (Lucas-Kanade, Horn-Schunck and Farnback) to the air-water region was tested. The results indicated that the Farnback technique provided most accurate results, although some misleading results could be obtained near the air-water boundaries of the roller. The bore generation by a rapid gate closure showed a highly-unsteady complicated velocity field, with substantial free-surface deformations, wave breaking and formation of large coherent structures before the surge detached from the gate. Further upstream, the surge propagated as a hydraulic jump in translation and the data showed a marked shear region with a recirculation zone above, showing air-water flow features comparable to stationary hydraulic jumps. The upper and lower bounds of air-water flow region yielded data implying an air-to-water velocity ratio about 4–5 for a Froude number Fr₁ = 2.1.     

非调制双色红外测温误差实时补偿方法研究

针对环境温度变化对双色红外测温准确度的影响,基于双色比色红外测温原理,分析了非调制双色红外测温的误差来源,提出一种新的快门式非调制双色红外测温方法。在光路中增加快门及其控制模块,控制快门闭合,将测得系统偏移作为补偿项,补偿实际测温时因温度变化给测量带来的误差。仿真结果表明,在600～1 100℃的测温范围内,长时间使用的无快门非调制红外双色测温的精度严重劣化,而快门式非调制双色红外测温的准确度大幅提高,可达到±0.5%。     

Evolution of linear edge dislocation in atmospheric turbulence and free space

In accordance with the extended Huygens–Fresnel principle, the evolution of linear edge dislocation propagating through atmospheric turbulence is studied, and the effects of waist width and the slope of linear edge dislocation are investigated. It is shown that when linear edge dislocation beams propagate through atmospheric turbulence, if the waist width is not equal and the slope is not zero, then the linear edge dislocation vanishes and transforms into an optical vortex with a topological charge of ?1 or +1. The optical vortex and an optical vortex that is created annihilate when the transmission distance is far enough. The linear edge dislocation vanishes when the slope is zero. If the waist width is equal, then the linear edge dislocation will vanish regardless of the slope value. For linear edge dislocation beams in free space, when selecting specific parameters, linear edge dislocation always exists.     

水平方向上的大气透过率和热辐射计算模型研究

水平方向上的空气对流和复杂的地面状况会导致大气热辐射计算的不确定度增大，目标发射起始段的红外辐射特性测量有助于实现目标识别。因此，研究水平大气透过率和热辐射对目标的高精度红外辐射特性测量具有十分重要的意义。针对以上问题，首先借鉴垂直廓线理论建立了同层大气“水平温度廓线”模型，然后推导了水平方向计算大气透过率和热辐射的公式，并对其进行了实验验证。最后将MODTRAN软件计算和实验测量的大气热辐射结果进行了比较。实验结果表明，传统软件的热辐射计算精度为8.65% ，而本文方法的计算精度为4.91%。该实验说明，在水平方向上，这种算法是正确的。通过公式推导和实验验证说明了该方法的合理性，为水平方向大气透过率和热辐射的计算提供了一种新的思路。     

Influence of bunch maturation and chemical precursors on acrylamide formation in starchy banana chips

The present study investigated the effect of ripening stages and chemical precursors on acrylamide formation in deep-fried chips of five plantains and one cooking banana. The highest level of acrylamide was found in the cooking banana, followed by False Horn plantain and French plantain, respectively. French plantain hybrids exhibited a significantly lower (P < 0.05) level of acrylamide when compared to French plantain. The ripening stage demonstrated a positive Pearson correlation (P < 0.05, r = 0.57) with acrylamide formation. As ripening progressed, the levels of glucose and fructose significantly increased (P < 0.05) and showed a positive correlation with acrylamide formation (r = 0.85 and 0.96, respectively). The level of the amino acid asparagine during ripening was not correlated with acrylamide formation. In contrast, the level of histidine, arginine, iso-leucine and cystine during ripening was positively correlated (P < 0.05, r > 0.60) with acrylamide formation in fried chips. The higher level of TP was significantly related (P < 0.05) to the lower level of acrylamide (r = −0.62). The reduced levels of carotenoid isomers, except lutein, during fruit ripening were positively correlated (P < 0.05) with acrylamide formation, especially trans-BC (r = 0.72) and 9-cis-BC(r = 0.64).     

Silicone-coated polyimide films deposited by surface dielectric barrier discharges

Hybrid dielectric barrier discharges are investigated for plasma generated on the surface of a dielectric layer, where two conducting electrodes of high voltage and ground are formulated on the upper and bottom surfaces. Using a flexible thin polyimide-film of a thickness ranging from 25 to 125 μm, a plasma is generated with a voltage of about 1 kV and a frequency of 40 kHz.However, the surface of the dielectric layer was etched through a chemical reaction involving plasma oxygen radical species, and thus the polyimide films failed readily, resulting in dielectric breakdown within short operating time ranging from a few minutes to several tens of minutes,based on the film thicknesses of 25 μm and 125 μm, respectively. These plasma erosions were prevented by coating the polyimide surface with a 25 μm thick silicone paste. The siliconecoated film surface was then reinforced remarkably against plasma erosion as the organic polymer was vulnerable to chemical reaction of the plasma species, while the inorganic silicone exhibited a high chemical resistance against plasma erosion.     

Theoretical kinetic study of the reaction between dimethyl disulfide and OH radicals

The potential energy profile of the reaction between dimethyl disulfide and OH^? radicals is explored by utilizing ab initio and hybrid meta density functional theory methods. Having the energies and structural data of the stationary points, statistical rate theories, such as transition state theory and variable reaction coordinate-transition state theory, are employed to compute the overall rate constants, and discuss the mechanism and product channels. On the basis of the calculations, the overall rate coefficient is predicted to be 2.49?×?10^?10?cm³?molecule^?1?s^?1 at 298?K. It is found that in the most favorable pathway, the reaction proceeds via formation of the relatively unstable intermediate CH₃S^?(OH)SCH₃ decomposing rapidly to yield CH₃S^?+CH₃SOH.