Development of mobile miniature natural gas liquefiers

With increasing consumption of natural gas (NG), small NG reservoirs, such as coalbed methane and oil field associated gas, have recently drawn significant attention. Owing to their special characteristics (e.g., scattered distribution and small output), small-scale NG liquefiers are highly required. Similarly, the mixed refrigerant cycle (MRC) is suitable for small-scale liquefaction systems due to its moderate complexity and power consumption. In consideration of the above, this paper reviews the development of mobile miniature NG liquefiers in Technical Institute of Physics and Chemistry (TIPC), China. To effectively liquefy the scattered NG and overcome the drawbacks of existing technologies, three main improvements, i.e., low-pressure MRC process driven by oil-lubricated screw compressor, compact cold box with the new designed heat exchangers, and standardized equipment manufacturing and integrated process technology have been made. The development pattern of “rapid cluster application and flexible liquefaction center” has been eventually proposed. The small-scale NG liquefier developed by TIPC has reached a minimum liquefaction power consumption of about 0.35 kW·h/Nm³. It is suitable to exploit small remote gas reserves which can also be used in boil-off gas reliquefaction and distributed peak-shaving of pipe networks.     

某深基坑工程复合土钉支护施工技术

本文结合深基坑支护设计与施工实例,提出了一种新的深基坑支护施工解决处理技术方案,同时对小变形护坡作为外墙模板的具体施工方法进行了简要介绍,对支护结果进行了监测和效果评析。     

饱和软黏土固结过程中的不排水抗剪强度特性

集成大直径固结仪和微型十字板剪切仪的功能,开发和研制了饱和软黏土固结过程中可以随时开展剪切试验的系统装置,考虑超孔压随时间和空间变化的不均匀性,在微型十字板剪切仪板头处的空心轴杆底端配置微型孔压计,并在大直径固结仪中配置微型土压力计,使其具备自动实时监测在十字板剪切试验测点处有效应力变化的功能。利用该系统装置,开展了饱和软黏土在不同固结压力作用下,固结过程中不同时点的十字板剪切试验,实时监测了固结过程中的变形和孔压变化过程,得到了十字板剪切试验测点处的有效应力和不排水抗剪强度,分析了固结过程中不排水抗剪强度和有效应力之间的相关关系。结果表明,在不同固结压力作用下,固结完成后的不排水抗剪强度与有效应力呈现出传统的线性关系,但是,在某一固结压力作用下,固结过程中的不排水抗剪强度却随有效应力的增长呈非线性增长,而且,在不同固结压力作用下,固结压力越大,固结过程中达到相同的有效应力时所对应的不排水抗剪强度越大。固结过程中的不排水抗剪强度并不仅仅取决于剪前固结有效应力,还与剪前孔隙比相关,孔压消散速率小于变形速率是导致固结初期、剪前固结有效应力较小时,不排水抗剪强度较快增长的主要原因。     

Performance Evaluation of Power Oscillation Damping Controller—Firefly Algorithm Based Parameter Tuning

This paper presents the performance evaluation of power oscillation damping controller based on firefly algorithm (FA) parameter tuning. The power system stabilizer (PSS), unified power flow controller (UPFC), and static synchronous series compensator (SSSC) are tuned with FA by minimizing integral time multiplied by absolute error (ITAE) as an objective function. An integrated multi-stage linear quadratic regulator – power oscillation damping UPFC/SSSC has been proposed with precise tuning of control parameters which results in overall states' oscillation damping as compared to other classical methods. It has been observed that the proposed control structure damps the oscillations adequately and is modular in design methodology. The sample power system comprising six areas has been considered to demonstrate the effectiveness of the concept. The software has been developed based on the proposed work by the authors and the MATLAB code has been generated in R2009b version. The states' inter-relation which has been shown with eigenvalues reflects a better regulation and the step response is also validated.     

Precise Orbit Determination for the FY-3C Satellite Using Onboard BDS and GPS Observations from 2013, 2015, and 2017

Using the FengYun-3C (FY-3C) onboard BeiDou Navigation Satellite System (BDS) and Global Positioning System (GPS) data from 2013 to 2017, this study investigates the performance and contribution of BDS to precise orbit determination (POD) for a low-Earth orbit (LEO). The overlap comparison result indicates that code bias correction of BDS can improve the POD accuracy by 12.4%. The multi-year averaged one-dimensional (1D) root mean square (RMS) of the overlapping orbit differences (OODs) for the GPS-only solution is 2.0, 1.7, and 1.5 cm, respectively, during the 2013, 2015, and 2017 periods. The 1D RMS for the BDS-only solution is 150.9, 115.0, and 47.4 cm, respectively, during the 2013, 2015, and 2017 periods, which is much worse than the GPS-only solution due to the regional system of BDS and the few BDS channels of the FY-3C receiver. For the BDS and GPS combined solution (also known as the GC combined solution), the averaged 1D RMS is 2.5, 2.3, and 1.6 cm, respectively, in 2013, 2015, and 2017, while the GC combined POD presents a significant accuracy improvement after the exclusion of geostationary Earth orbit (GEO) satellites. The main reason for the improvement seen after this exclusion is the unfavorable satellite tracking geometry and poor orbit accuracy of GEO satellites. The accuracy of BDS-only and GC combined solutions have gradually improved from 2013 to 2017, thanks to improvements in the accuracy of International GNSS Service (IGS) orbit and clock products in recent years, especially the availability of a high-frequency satellite clock product (30 s sampling interval) since 2015. Moreover, the GC POD (without GEO) was able to achieve slightly better accuracy than the GPS-only POD in 2017, indicating that the fusion of BDS and GPS observations can improve the accuracy of LEO POD. GC combined POD can significantly improve the reliability of LEO POD, simply due to system redundancy. An increased contribution of BDS to LEO POD can be expected with the launch of more BDS satellites and with further improvements in the accuracy of BDS satellite products in the near future.     

A new high-pressure clearance seal with flexible laddered piston assembly in oil-free miniature compressor for potential hydrogen applications and investigation on its dynamic sealing efficiency

In this paper, a new flexible laddered piston assembly of clearance seal without any soft seal part was proposed for a long life time run of high-pressure stage in oil-free miniature compressor for potential hydrogen applications. In this assembly, the functions of radial load bearing and gas sealing were undertaken independently by large and small piston. The dynamic sealing performance evaluation was carried out by comprehensively considering the real-time variation of gas properties and piston motion with thermodynamic process in the compression chamber. Simulation study shows that the introduced clearance gap has a great influence on the expansion, compression and discharge process. Leakage through the clearance would lead to the in-cylinder pressure drop during the discharge process and bring about oscillation and earlier closure of the discharge valve. Sealing clearance exert more significant influence on the sealing efficiency in the high-pressure stage compared to sealing length and shaft speed.     

Knowledge domain states mapping concept for controller tuning in an interconnected power network

This paper presents novel power system stabilizers (PSS) tuning approach with particles swarm optimization (PSO) driven knowledge domain states mapping for multi area power system. Tuning of PSS parameters has been done by PSO technique offline at different operating conditions as load dynamics change. The objective function for PSS parameters tuning is integral time multiplied by absolute error (ITAE). The sets of tuned parameters at different operating conditions thus obtained are termed as knowledge domain. The process is viewed as knowledge domain mapping. The dynamical system response has been linked with states, and if there is any violation from desired limits, control action is initiated and thus retuned control parameters obtained straight away from the respective knowledge domain helps to provide quick response and precise damping of signals of interest. Proposed concept also demonstrates that if one controller (PSS) fails to stabilize the system at certain operating condition then another controller (UPFC) connected in the system acts as supplementary controller in automation which assists PSS functioning and thus entire system operation improves by way of modulating the signal dynamics at interface points which quickly damps oscillations. The system study has been performed on a sample six area power systems comprising of UPFC connected between area two and three and PSS to all areas. The proposed concept demonstrates auto tuning of PSS for quick oscillation damping as the operating conditions change and also under situations of PSS failure due to relatively larger perturbation, UPFC acts as supplementary controller by assisting the entire system PSS to recover ensuring stability.