一种基于抽取LMS的距离旁瓣抑制方法

在噪声雷达中，传统相关处理方法的距离旁瓣受到时宽带宽积的限制，在有限相关处理时间内得到的距离旁瓣较高，会造成微弱目标被强目标、杂波旁瓣淹没的现象。提出一种基于抽取最小均方（Least Mean Square,LMS）滤波的噪声雷达旁瓣抑制方法，将LMS滤波器的系数作为距离压缩结果，从而获取较低的距离旁瓣。对该方法的性能进行了理论分析，并通过数字仿真验证了算法的有效性和理论分析的正确性。     

Structural,electrical, and linear/nonlinear optical characteristics of thermally evaporated molybdenum oxide thin films

Homogeneous thin films of Molybdenum oxide (MoO₃) were grown on quartz and glass substrates using the thermal evaporation method. XRD results showed that the MoO₃ powder has a polycrystalline structure with an orthorhombic crystal system whereas the MoO₃ thin films have amorphous nature. SEM images showed that the MoO₃ thin films have a nearly uniform surfaces with worm-like shape grains. The film thickness influences on the linear and nonlinear optical characteristics of MoO₃ thin films that were examined using spectrophotometric measurements and from which, the linear optical constants of the MoO₃ thin films were estimated. The electronic transition type was determined as a direct allowed one. The values of the optical band gap were obtained to be in the range of 3.88–3.72 eV. The dispersion parameters, third-order nonlinear optical susceptibility, and the nonlinear refractive index of the MoO₃ thin films were determined and interpreted in the light of the single oscillator model. The temperature dependence of the DC electrical conductivity and the corresponding conduction mechanism for the MoO₃ films were investigated at temperatures ranging from 303 to 463 K.     

Effect of the particle size ratio on macro- and mesoscopic shear characteristics of the geogrid-reinforced rubber and sand mixture interface

As a new type of material for civil engineering projects, the rubber and sand mixture is widely used in roadbed fillers, offering environmental benefits over traditional tyre disposal methods. This study uses a large-scale direct shear apparatus to examine the interface shear properties of the geogrid-reinforced rubber and sand mixture, considering different particle size ratios (r), rubber contents, and normal stresses. Based on indoor tests, direct shear models of the mixture with different values of r are established in PFC^3D, revealing the meso-mechanical mechanism of the mixture in the direct shear process. The results show that when r is greater than 1, incorporating a certain amount of rubber particles can increase the shear strength of the mixture. The r values of 15.78, 7.63, and 3.98 correspond to an optimal rubber content of 30%, 10%, and 20%, respectively. When r is less than 1, mixing rubber particles can only reduce the shear strength of the mixture. When the rubber content is low, the smaller the value of r, the greater is the thickness of the shear band. Furthermore, the normal and tangential contact forces are greater. The fabric anisotropy evolution law of the mixture is consistent with the change in the contact force distribution.     

Characterization of Bi2O3 thin films for doping photoluminescent Er3+ ions

Undoped and Er³⁺-doped Bi₂O₃ thin films were sputter-deposited on Si(100) substrates. Sufficiently oxidized Bi₂O₃ films with refractive indices between 2.17?2.23 were obtained at a wavelength of 633 nm; these values are comparable to those of bulk Bi₂O₃ crystals. While the film composition was stable for deposition temperatures between room temperature (RT) and 450 °C, the refractive index steeply decreased above 450 °C and reached 1.4 at 600 °C. The lowering of the optical transmittance spectra indicated aggregation of metallic Bi and darkening of the film. All films exhibited X-ray diffraction patterns of α-Bi₂O₃. The direct and indirect bandgap energies derived from the Tauc plots were 3.4–3.7 eV and 1.9–2.5 eV, respectively, depending on the O₂ flow rate and deposition temperature. Upon excitation of Er³⁺-doped Bi₂O₃ films at 532 nm, Er³⁺ emissions peaking at 1537 and 1541 nm appeared, and the photoluminescence spectra included fine structures reflecting crystal-field splitting. Resonant excitation of Er³⁺ 4f levels and indirect excitation via the defect levels of Bi₂O₃ followed by energy transfer to Er³⁺ contributed to the emission. The films deposited at RT with Er concentrations of 2 at.% had the emission intensity of Er³⁺, but concentration quenching strongly suppressed the Er³⁺ emission because the doped Er³⁺ ions stayed inside the Bi₂O₃ crystals. At deposition temperatures above 400 °C, the concentration quenching was mitigated possibly because out-diffusion of Er³⁺ ions reduced the effective number of Er³⁺ ions in the Bi₂O₃ crystalline domains.     

Growth mechanism and gas-sensing characteristics of organic-additive-free zinc oxide of various shapes

Zinc oxide is widely used in gas sensors, solar cells, and photocatalysts because of its wide bandgap and exciton binding energy of 60 meV in various metal oxides. To use ZnO as a gas sensor, it is necessary to synthesize it with surface defects and a large specific surface area. In this study, hydrothermal synthesis without surfactants was employed to obtain organic-additive-free ZnO. For morphology control, we varied the ratio of the hydroxide ion concentration to the zinc ion concentration. To confirm the growth mechanism of ZnO, we performed X-ray diffraction, scanning electron microscopy, and transmission electron microscopy analyses. Raman spectroscopy and photoluminescence measurements were performed to analyze the surface properties. The Brunauer–Emmett–Teller method and probe stations were used to measure the specific surface area and sensitivity of the gas sensor, respectively. The results confirmed that flower-shaped ZnO is the most suitable gas-sensing material.     

基于信息熵抑制的大数据特征隐匿性加密仿真

针对传统大数据特征加密方法中大数据精度较差、加密耗时较长的问题,提出基于信息熵抑制的大数据特征隐匿性加密方法。分析信息熵抑制相关理论,采用信息熵映射函数对大数据分类,将信息熵抑制过程转化为计算2个文件相似性的过程,并根据余弦相似度公式以及Hamming距离值计算数据相似度,完成数据消冗。在完成数据消冗的基础上,分析分组密码方法和ECC加密方法,结合两种方法得到大数据特征隐匿性加密处理计算公式,实现基于信息熵抑制的大数据特征隐匿性加密。实验研究结果表明,所提方法能够有效去除冗余数据,提升大数据精度,加快数据加密的处理速度,高效完成大数据加密过程。     

Study of physicochemical properties of flutamide-loaded Ocimum basilicum microspheres with ex vivo mucoadhesion and in vitro drug release

Drug which shows extensive first pass effect is difficult task that, needs to be solved by formulators in the pharmaceutical science. The low oral bioavailability (49%) of flutamide may be due to poor wettability, low aqueous solubility and extensive first pass effect. The aim of present investigation was to prepare flutamide loaded microspheres and incorporate it into suppositories for rectal delivery to avoid first pass effect and enhance residence time. Flutamide loaded mucoadhesive microspheres of Ocimum Basilicum mucilage (OBM) were prepared using spray drying and characterized by percent production yield, encapsulation efficiency, particle size, zeta potential, polydispersity index, DSC, SEM, XRPD, in vitro drug release and stability studies. Moreover, ex vivo mucoadhesion was investigated using falling liquid film technique to determine the adhesion of microspheres to sheep rectal mucosa. The microspheres had nearly spherical shape and size about 2.53?μm. The encapsulation efficiency and mucoadhesion of optimized formulation MBF10 were found to be 69.6?±?2.3% and 89.01?±?2.18%, respectively. Percent CDR of optimized flutamide loaded mucoadhesive microspheres was found to be 88.7?±?1.3 at 7?h. In conclusion, OBM microparticles based suppository could be used to deliver drug through rectal delivery.     

基于高分一号遥感卫星的渤海湾悬浮泥沙时空分布反演

悬浮泥沙是评价II类水体水质的重要参数之一,近海岸水域悬浮泥沙对重金属、营养盐等具有一定的吸附作用,悬浮泥沙的分布特征在一定程度上反映着污染物的迁移和循环,因此研究悬浮泥沙对渤海湾建设和环境保护具有重要意义。为探究渤海湾水域悬浮泥沙浓度 和分布的变化特征,利用高分一号多光谱卫星影像,通过采用波段组合的方式对悬浮泥沙含量指数反演提取,反演得到2019年9个月的渤海湾悬浮泥沙指数,分析发现渤海湾悬浮泥沙含量在冬季受季风影响较高,春季和夏季的时候渤海湾高浓度悬浮泥沙向近岸收缩,秋季 悬浮泥沙分布格局有正在向冬季过渡的趋势,本文研究可为渤海湾的生态环境保护和工业开发提供重要的科学依据和参考价值。     

Design of switchable band‐notched frequency selective absorber

An active band‐notched frequency selective absorber (BNFSA) with switchable notch band is proposed in this article. The BNFSA is a two‐layer structure composed of a lossy layer at the top and a ground plane at the bottom, separated by an air spacer. The element of the lossy layer is a lumped‐resistor‐loaded metallic dipole with a parallel LC resonance structure, which is realized by complementary n‐shaped resonator (CnR) inserted in the center, and PIN diode is welded at two arms of CnR. The bias circuit printed on the back of the substrate of the lossy layer connects to anode and cathode of the diode by via hole and isolates by the inductor. Simulation results show that the notch bands are located at 4.50 and 6.81 GHz when the diode sets to ON and OFF, respectively. To validate the performance of switchable BNFSA, the prototypes are fabricated and measured, reasonable agreement between simulated and measured results is obtained.     

Measurement of vertical and horizontal vibrations of a probe for acoustic evaluation of food texture

Two‐dimensional (vertical and horizontal) vibrations of a wedge‐type probe upon food rupture were evaluated separately using two accelerometers placed perpendicular to a guide rod of a swing‐arm device for texture evaluation of the flesh of three varieties of apples and three types of potato chips. Voltage signals from the accelerometers were filtered using a half‐octave band‐pass filter. The energy texture index (ETI), based on kinetic energy of the vertical or horizontal probe vibrations, was calculated over low to high frequency bands (no. 1–21). The spectra for the flesh of the three varieties of apples included two common peaks for vertical ETI at band no. 11 (1,120–1,600 Hz) and 19 (17,920–25,600 Hz) and horizontal ETI at band no. 1 (0–10 Hz) and 15 (4,480–6,400 Hz). The spectra for the three types of potato chips had a common ETI peak at band no. 11 (1,120–1,600 Hz) for horizontal ETI and at no. 15 (4,480–6,400 Hz) for vertical ETI. The three apple varieties gave rise to different intensities of vertical and horizontal ETIs while the two peaks were maintained. The thick potato chip type had higher vertical and horizontal ETIs than the thin and soft varieties in most bands; however, the thin type had the highest vertical ETIs only in lower bands (0–200 Hz). The soft type had the lowest vertical and horizontal ETI. The above results suggest that different food textures can be distinguished by two‐dimensional vibration analyses of probe insertion into a food sample based on frequency bands.