Effect of cyclotron resonance on ‘hot’ dispersion in a staggered double metallic grating sheet beam travelling wave tube

Based on the beam wave synchronous interaction in transverse and longitudinal directions at the same time and starting from Maxwell’s equation and linear Vlasov equation, the beam–wave interaction ‘hot’ dispersion equation considering both cyclotron resonance and Cherenkov resonance in a staggered double metallic grating traveling wave tube is deduced. Through the reasonable selection for geometric and electrical parameters, the numerical calculation and analysis of the ‘hot’ dispersion equation shows that the beam–wave interaction gain and frequency band with the cyclotron resonance enhancement effect are higher than those with only Cherenkov resonance radiation.     

Flame extension and the near field under the ceiling for travelling fires inside large compartments

Structures need to be designed to maintain their stability in the event of a fire. The travelling fire methodology (TFM) defines the thermal boundary condition for structural design of large compartments of fires that do not flashover, considering near field and far field regions. TFM assumes a near field temperature of 1200°C, where the flame is impinging on the ceiling without any extension and gives the temperature of the hot gases in the far field from Alpert correlations. This paper revisits the near field assumptions of the TFM and, for the first time, includes horizontal flame extension under the ceiling, which affects the heating exposure of the structural members thus their load-bearing capacity. It also formulates the thermal boundary condition in terms of heat flux rather than in terms of temperature as it is used in TFM, which allows for a more formal treatment of heat transfer. The Hasemi, Wakamatsu, and Lattimer models of heat flux from flame are investigated for the near field. The methodology is applied to an open-plan generic office compartment with a floor area of 960 m² and 3.60 m high with concrete and with protected and unprotected steel structural members. The near field length with flame extension (fTFM) is found to be between 1.5 and 6.5 times longer than without flame extension. The duration of the exposure to peak heat flux depends on the flame length, which is 53 min for fTFM compared with 17 min for TFM, in the case of a slow 5% floor area fire. The peak heat flux is from 112 to 236 kW/m² for the majority of fire sizes using the Wakamatsu model and from 80 to 120 kW/m² for the Hasemi and Lattimer models, compared with 215 to 228 kW/m² for TFM. The results show that for all cases, TFM results in higher structural temperatures compared with different fTFM models (600°C for concrete rebar and 800°C for protected steel beam), except for the Wakamatsu model that for small fires, leads to approximately 20% higher temperatures than TFM. These findings mitigate the uncertainty around the TFM near field model and confirm that it is conservative for calculation of the thermal load on structures. This study contributes to the creation of design tools for better structural fire engineering.     

中国菊花主题花展及其对行业发展的作用

中国的菊花主题花展(菊花展览)是最重要的赏菊形式,对我国3种主要类型的菊花展览,即综合性菊花展览(中国菊花展览会、国际博览会菊花专项展和各级城市菊花展)、菊花专类园和菊花花田花海的发展现状进行了研究,并分析了菊花展览在促进菊花产业发展、弘扬菊花文化、服务生态文明及美丽乡村建设、加强菊花非物质文化遗产保护中的重要作用,为推动我国菊花展览水平的提高提供借鉴。     

7号连铸机的NKK液位PID控制参数及结晶器流场优化

本钢三连铸的单流宽板坯连铸机从达涅利公司引进,于2008年12月4日建成投产,结晶器液位控制采用NKK技术。介绍了7号连铸机生产超低碳钢过程中,结晶器液位出现不稳定性波浪的原因,并通过改进NKK液位控制工艺,微调PID控制参数,以及优化结晶器流场等措施,提高了宽幅汽车板生产时的结晶器液位控制精度,并且解决和消除了不稳定型波浪的问题,使宽幅汽车板的轧制成材率大幅提升。     

穿孔机顶杆循环装置液压控制系统的研究

设计穿孔机区域顶杆循环装置中顶杆小车油缸控制系统,对长行程高速重载液压系统油缸的速度、加速度、两腔液压力进行分析,对该类液压控制系统的运行机制、控制策略进行研究,进行了理论计算、仿真分析和实测验证,为类似工况液压控制系统的研究提供参考。     

基于地域的景观温室热带雨林展示区 景观设计

通过对原生热带雨林景观特征的研究以及中国3个 以植物原生境为展示特色的植物园景观温室热带雨林展示区的 调查研究,发现景观温室设计上对雨林原生状态景观的表现存 在雨林类型呈现不完全、地域性不足、整体性不明显等问题。 在世界热带雨林各分布区地域特征分析的基础上,提出景观温 室热带雨林展示区以非洲雨林群系、美洲雨林群系以及印度- 马来雨林群系作为主题。从不同地域主题出发,从地形、土 壤、水体、文化、植物等景观要素的设置上进行景观设计,旨 在展现不同雨林群系的地域特色,为景观温室热带雨林展示区 景观设计提供参考。     

无锡体育会展中心大跨度钢管桁架安装技术

从构件制作、吊机道路、双机抬吊同步控制、支座就位、现场焊接、高空拼接等方面介绍了无锡体育会展中心百米跨度倒三角形钢管桁架的安装技术,统计汇总工期进展和质量检测等相关数据。     

上海世博会展馆建筑空调负荷指标的影响因素分析

基于2010年上海世博会展馆建筑规划,对展馆建筑的建筑外形、建材热特性和使用特性等建筑空调负荷指标的主要影响因素进行模拟计算。研究结果表明,建筑面积、建筑材料热特性和建筑内扰是空调负荷指标的主要影响因素,因而展馆建筑空调系统的能耗在很大程度上取决于参展客流量和建筑外围护结构的热特性。     

上海植物园展览温室空调设计

简要介绍上海植物园展览温室的空调系统、通风系统和自控系统的设计,根据展览温室的特点,着重介绍为满足热带植物对环境的要求,而采取的通风、加湿、温度控制以及高大空间温度梯度的控制等方面的措施。     

浐灞河生态区历史文化旅游资源的开发与利用

结合西安旅游重人文轻自然的特点挖掘分析了浐灞河生态区的旅游资源开发价值,提出了借助丰富的表演来进行文化的创新,设计人文与自然相融合的体验式旅游,探讨了历史文化旅游资源在依托自然旅游资源基础上的和谐开发利用,以期创造西安东部旅游的品牌效应。