Synthesis and performance evaluation of a new drag reducer based on acrylamide/12-allyloxydodecyl acid sodium

Hydraulic fracturing with slickwater is a field-proven stimulation technology used in tight reservoirs. Because of the high pumping rate associated with slickwater fracturing, drag reduction (DR) is critical in minimizing pressure drop and the success of oilfield operations. In this paper, a new type of drag reducer (SPR) was synthesized with acrylamide and 12-allyloxydodecyl acid sodium, and its drag reduction performance was evaluated. The results showed that the new drag reducer features low molecular weight, fast-dissolving rate and low interfacial tension. The algorithm of estimating the drag reduction rate of non-Newtonian fluid SPR was proposed and validated. Empirical or semianalytical models for estimating the friction ratio (σ) or friction factor (λ or f) were used to simulate the turbulence behavior of the SPR drag reducer under different Reynolds numbers (Re). The modified Virk's correlation could accurately model the turbulent behavior of the SPR drag reducer. A unified calculation formula was established in this study for different pipe diameters.     

适用于“一步酸溶法”生产氧化铝工艺中稀释料浆的高分子絮凝剂的合成

为达到"一步酸溶法"生产氧化铝工艺中稀释料浆在高温、高酸度工况下进行固液高效分离的目的,以丙烯酰胺(AM)与阳离子(DMDAAC)为共聚单体,通过水溶液聚合法合成了阳离子聚丙烯酰胺(CPAM)絮凝剂。以转化率和相对分子质量为目标,通过单因素分析法确定了最优的合成工艺条件,即反应温度30℃,单体总质量分数为30%,阳离子度5%,K2S2O8和NaHSO3质量分数均为0.005%,2,2′-偶氮二(2-脒基丙烷盐酸盐)(V50)质量分数为0.0025%,乙二胺四乙酸(EDTA)质量分数为0.05%的条件下,反应时间为6 h,获得相对分子质量为1.2×107溶解性能较好的阳离子型聚丙烯酰胺(CPAM)。     

超声微波耦合制备P(AM-DMC-BA)及其污泥脱水研究

以丙烯酰胺(AM)为主单体、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为阳离子单体、丙烯酸丁酯(BA)为疏水单体,偶氮二异丁脒盐酸盐(V-50)为引发剂,通过微波和超声耦合技术合成新型高效阳离子共聚物絮凝剂P(AM-DMC-BA)。考察了原料对P(AM-DMC-BA)特性黏度及转化率的影响,P(AM-DMC-BA)对其进行了表征,并用于污泥脱水实验。结果表明,当单体AM、DMC、BA的质量分数分别为22.5%、7.5%、1%,引发剂V-50的质量分数为2%,尿素的质量分数为1.2%,聚合体系pH为3.5,制得的P(AM-DMC-BA)的特性黏度及转化率最高。当共聚物投加量为45 mg/L、污泥溶液pH为7时,其对污泥有较好的脱水性能,且具有良好的pH抗性。     

One‐shot radical polymerization of vinyl monomers with different reactivity accompanying spontaneous delay of polymerization for the synthesis of double‐network hydrogels

Double‐network hydrogels were conveniently synthesized by the one‐shot radical polymerization of an ionic monomer for the first network and a non‐ionic monomer for the second network in the presence of crosslinkers by simultaneous addition of the monomers, that is, one‐shot and spontaneous two‐step polymerization accompanying the delay of polymerization of a second network monomer. We analyzed the polymerization process based on the conversion of each monomer during the reaction in the absence of crosslinkers. Then we fabricated the double‐network hydrogels using several polymerization systems consisting of a conjugated monomer and a non‐conjugated monomer in the presence of the dual crosslinkers. We analyzed the swelling, mechanical and viscoelastic properties of hydrogels synthesized by one‐shot radical polymerization to confirm the production mechanism and the network structure of the hydrogels. © 2020 Society of Chemical Industry     

Synthesis of lignosulfonate-acrylamide-dimethyldiallylammonium chloride copolymer and its flocculation performance

In this work, lignosulfonate-acrylamide-dimethyldiallylammonium chloride (LAD) terpolymer was designed and synthesized by microwave-assisted graft polymerization. The optimal synthetic process was obtained as follows: the monomer ratio was 1:4:4, the amount of initiator was 0.9% (w/w), the monomer solid content was 21 wt %, and the reaction time was 14 min with the microwave power of 280 W. Furthermore, the flocculation performance of LAD was verified by removing acid black-172 dye wastewater. At the LAD dosage of 350 mg L⁻¹, the maximum color removal ratio reached 99.8% in 100 mg L⁻¹ of dye wastewater. The dynamics of dye removal reached higher than 90% after 20 s. The flocculant can maintain color removal ratio more than 98% in a wide flocculant dosage and environmental pH. The flocculation mechanism was mainly electrical neutralization and bridging effect. In general, it is a promising candidate in wastewater treatment in terms of cost, synthetic method, and effectiveness. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48560.     

Effects of methyl cellulose-based coating on physiochemical properties and chemical hazards of Chinese fried dough cake during storage

Coating has been used as a practical method to ensure the physiochemical properties and reduce the chemical hazard of fried foods. Methyl cellulose (MC) was used as a coating material to pretreat Chinese fried dough cake (CFDC) before frying. The results showed that the water content, hardness and L* value of the 1% MC coated sample were 31.67%, 848.54 g and 51.62, respectively, at the seventh day at 25 °C. Coating contents 1% MC could reduce the oil content, hardness, and extent of browning and improve the physiochemical properties of CFDC on 7 days of storage. Coating contents 1% MC also reduced the acid value, peroxide value, p-anisidine value, malondialdehyde content, 4-hydroxy-2-(E)-hexenal content, 4-hydroxy-2-(E)-nonenal content, acrylamide content and glycidyl ester content in CFDC on 7 days of storage. Our work contributes to the control of the oil content and chemical hazards for fried food during storage by applying an edible coating.     

Single‐step synthesis of a radically polymerizable 1,1′‐bi‐2‐naphthol derivative for asymmetric catalysis

A new polymerizable 1,1′‐bi‐2‐naphthol derivative for polymer‐supported catalytic asymmetric synthesis is presented. The synthesis is conducted within a single reaction step, which is a major advantage over other approaches presented in the literature. The ligand‐bearing polymer is prepared through copolymerization with N‐isopropylacrylamide. Preliminary experiments on the utility in catalytic asymmetric alkylation reactions reveal the accessibility and activity of the polymer‐attached catalysts. The stereoselectivity of the reaction is found to be somewhat lower than for reactions performed in the presence of free 1,1′‐bi‐2‐naphthol, and thus requires further optimization. The enantiomeric excess of the reaction products was determined via ¹H NMR spectroscopy after chiral derivatization with (R)‐α‐methylbenzyl isocyanate. © 2015 Society of Chemical Industry