镁合金网格壁板压弯成形数值模拟及实验研究

为探索镁合金整体壁板压弯成形的可行性,以及镁合金壁板压弯成形过程中金属的流动规律,对AZ31镁合金网格壁板压弯成形进行了数值模拟和实验研究。建立了有限元数值模拟的几何模型,采用有限元计算软件对AZ31镁合金网格壁板压弯成形过程进行了数值模拟研究,分析了镁合金网格壁板压弯成形中的温度场、应变场、应力场、破坏系数等的分布规律。确定了合适的AZ31镁合金壁板压弯成形工艺参数,并对镁合金网格壁板压弯成形进行了实验研究,获得了合格的镁合金网格壁板弯曲件,并分析了镁合金网格壁板成形件尺寸精度,模拟结果与实验结果相吻合,最大相对误差为16.7%。     

LTE室分高倒流小区解决方案的研究

LTE室分高倒流直接影响室内4G用户的感知，同时较大程度拉低LTE网络驻留率指标。由于室内无线环境的封闭性，室分小区之间的覆盖独立性，仅仅通过参数调整的手段达到降低高倒流的效果非常不明显，因此本文针对目前影响室内用户感知的高倒流问题，从高倒流小区的标准出发，对室分高倒流小区的发现手段，产生原因及解决方案进行详尽地阐述，并针对各类型的高倒流情形提出解决方法，最终提供读者发现、分析及解决室分高倒流小区的有效方案，从而作为研究方法提供给LTE室内小区高倒流问题解决的指导意见     

能源土边界面模型的应力更新算法及算例分析

水合物的存在会显著影响能源土的刚度、峰值强度与剪胀性。针对已有能源土模型的不足，结合边界面模型的建模思想，构建一个新的能源土边界面模型，模型参数较少，能够恰当反映能源土的应力-应变关系。计算能源土变形问题的核心在于正确积分塑性本构方程，应用完全隐式回退Euler算法，建立模型应力及塑性内变量的更新公式，并给出显式的一致性切线模量表达式。基于ABAQUS软件提供的二次开发接口，编写模型的用户材料子程序，应用已有试验数据验证程序正确性。最后应用开发的子程序对能源土的平面应变试验进行模拟，分析水合物饱和度对剪切带倾角与孔隙比的影响。     

Effect of extrusion temperature on mechanical properties of as-extruded Zn–22Al alloys

ABSTRACT

The effect of extrusion temperature on the microstructures and mechanical properties of as-extruded Zn–22Al alloys was investigated in this study. With decrease of extrusion temperature from 350 to 200°C, the elongation of as-extruded Zn–22Al alloys increases remarkably at low strain rate and has no change at high strain rate, which implies that the Zn–22Al alloys extruded at lower temperature exhibit high-ductility behaviour. X-ray diffraction and electron back-scattered diffraction analysis demonstrated that the maximum elongation of Zn–22Al alloys extruded at the extrusion temperature of 200°C can be attributed to the elimination of the lamellar structure and the refinement in grain size of the Zn-rich phase.     

Analysis and control of micro-stepping characteristics of ultrasonic motor

Frontiers of Mechanical Engineering - Micro-stepping motion of ultrasonic motors satisfies biomedical applications, such as cell operation and nuclear magnetic resonance, which require a precise...     

Ultrasonic tomographic velocimeter for visualization of axial flow fields in pipes

An ultrasonic tomographic velocimeter to provide quantitative images of axial flow fields in pipes is developed and presented in this work. To detect the flow in various directions and positions, a novel transducer configuration strategy is proposed. All-in-one transducers are mounted in two sectional planes of the pipe. In each plane, N transducers are equally spaced along the circumference. Overlapped propagation paths are introduced by the configuration strategy, and the influence of the vortex flow can be eliminated theoretically by averaging the line velocities of the overlapped paths. To achieve a fast detection speed, the projection data is collected via an electrical scan in a fan-beam mode. After rearrangement and interpolation of the projection data, the parallel beam filtered back projection (FBP) algorithm is implemented to reconstruct the axial flow field. Numerical simulations with the theoretical velocity profiles were performed. The compensation method for the vortex flow is proved to be effective and necessary, and the number of transducers required for reconstruction of common flow profiles was estimated. Accordingly, an ultrasonic tomographic velocimeter consisting of 2×12 transducers was fabricated. Experiments were conducted in the straight pipe and downstream of a single bend pipe and compared with the computational fluid dynamics (CFD) simulation results. As demonstrated, the ultrasonic tomographic velocimeter was capable of visualizing both symmetric and asymmetric axial flow fields with high reliability.     

Deterministic and probabilistic ship pitch prediction using a multi-predictor integration model based on hybrid data preprocessing,reinforcement learning and improved QRNN

The deterministic and probabilistic prediction of ship motion is important for safe navigation and stable real-time operational control of ships at sea. However, the volatility and randomness of ship motion, the non-adaptive nature of single predictors and the poor coverage of quantile regression pose serious challenges to uncertainty prediction, making research in this field limited. In this paper, a multi-predictor integration model based on hybrid data preprocessing, reinforcement learning and improved quantile regression neural network (QRNN) is proposed to explore the deterministic and probabilistic prediction of ship pitch motion. To validate the performance of the proposed multi-predictor integrated prediction model, an experimental study is conducted with three sets of actual ship longitudinal motions during sea trials in the South China Sea. The experimental results indicate that the root mean square errors (RMSEs) of the proposed model of deterministic prediction are 0.0254°, 0.0359°, and 0.0188°, respectively. Taking series #2 as an example, the prediction interval coverage probabilities (PICPs) of the proposed model of probability predictions at 90%, 95%, and 99% confidence levels (CLs) are 0.9400, 0.9800, and 1.0000, respectively. This study signifies that the proposed model can provide trusted deterministic predictions and can effectively quantify the uncertainty of ship pitch motion, which has the potential to provide practical support for ship early warning systems.     

分层反压注射成型厚壁光学透镜的工艺分析

为了研究反压压力对成型厚壁光学透镜的影响，利用自行开发的分层反压注射成型厚壁光学透镜的实验方案，通过正交实验优化设计开展了工艺参数优化实验，研究了在不同分层方式下内外层反压压力对对厚壁光学透镜光学性能的影响，从而根据正交优化参数组合成型具有优异光学性能的理想厚壁光学透镜。 正交实验研究结果表明，使用聚甲基丙烯酸甲酯（PMMA）为厚壁光学透镜的原材料进行分层反压注射成型，能够有效减少厚壁光学透镜收缩率，同时随着内外层反压压力的提高，厚壁光学透镜的透光率和折射率均不同程度的得到提高，透镜光学性能优异。