Spirobifluorene Dimers: Understanding How The Molecular Assemblies Drive The Electronic Properties

Spirobifluorene (SBF) is one of the most important scaffolds used in the design of organic semi-conductors (OSCs) for electronics. In recent years, among all the structures developed for these applications, SBF dimers have been highlighted due to their great potential in thermally activated delayed fluorescence and in phosphorescent organic light-emitting diodes. Attaching two SBF units generate 10 dimers, each possessing its own structural specificity, which in turn drives its electronic properties. These ten SBF dimers are gathered herein. Understanding how the molecular assembly determines the electronic properties has been one of the pillars of organic electronics. This is the goal of this article. As positional isomerism is a key tool to design OSCs, defining the design guidelines for the SBF scaffold appears of interest for the future of this building block. Herein, the importance of the two main parameters involved in the electrochemical and photophysical properties, namely the nature of the phenyl linkages and the steric congestion between the two SBF units is discussed. The combination of these two parameters drives the electronic properties but their respective weight is different as a function of the regioisomer involved or of the property considered (frontier orbitals energy level, absorption, fluorescence, phosphorescence).     

天然气水合物储层泥质细粉砂挡砂介质堵塞规律与微观挡砂机制

中国南海海域部分天然气水合物储层中地层砂为高泥质含量细粉砂，开采防控砂难度较大。针对高泥质细粉砂挡砂机制问题，使用粒度中值为10.13 μm的泥质细粉砂样品，模拟单向气液携砂流动条件，使用绕丝筛板、金属烧结网、金属纤维、预充填陶粒4类挡砂介质在20~80 μm挡砂精度下进行挡砂模拟实验，采用显微成像系统观察挡砂介质内部及表面砂粒沉积与堵塞动态，分析介质流通性能和挡砂性能变化，总结堵塞规律、微观挡砂机制与形态及其控制因素。研究结果表明，不同类型和精度的挡砂介质对泥质细粉砂的堵塞总体呈现堵塞开始、堵塞加剧和堵塞平衡3个阶段。随着驱替进行，挡砂介质渗透率逐渐降低，幅度会高达90%以上；同时过砂速度减缓，最终过砂率为5%~10%。根据堵塞规律和微观图像分析，提出了粗组分分选桥架、局部砂团适度挡砂、整体砂桥阻挡等挡砂介质对泥质细粉砂的3种微观挡砂机制。以粗组分分选桥架挡砂机制为主的挡砂工况下，挡砂介质堵塞渗透率较高，但过砂率超过15%，挡砂效果较差；以整体砂桥挡砂机制为主时，过砂率在10%以下，挡砂性能较好，但各类挡砂介质的堵塞渗透率不足1 D，流通性能较差。局部砂团适度挡砂机制为主时介质挡砂性能及流通性能介于两者之间。挡砂介质对天然气水合物储层泥质细粉砂的微观挡砂机制和形态受挡砂介质类型、精度、地层砂特征以及流动条件等因素控制，其规律对于水合物泥质细粉砂防控砂优化有指导意义。     

Hydrogen storage capacity and reversibility of Li-decorated B4CN3 monolayer revealed by first-principles calculations

This work explored the feasibility of Li decoration on the B₄CN₃ monolayer for hydrogen (H₂) storage performance using first-principles calculations. The results of density functional theory (DFT) calculations showed that each Li atom decorated on the B₄CN₃ monolayer can physically adsorb four H₂ molecules with an average adsorption energy of ?0.23 eV/H₂, and the corresponding theoretical gravimetric density could reach as high as 12.7 wt%. Moreover, the H₂ desorption behaviors of Li-decorated B₄CN₃ monolayer at temperatures of 100, 200, 300 and 400 K were simulated via molecular dynamics (MD) methods. The results showed that the structure was stable within the prescribed temperature range, and a large amount of H₂ could be released at 300 K, indicative of the reversibility of hydrogen storage. The above findings demonstrate that the Li-decorated B₄CN₃ monolayer can serve as a favorable candidate material for high-capacity reversible hydrogen storage application.     

Farmers' preferences for adopting on-farm concentration of raw milk: Results from a discrete choice experiment in Germany

Milk concentrates are used in the manufacturing of dairy products such as yogurt and cheese or are processed into milk powder. Processes for the nonthermal separation of water and valuable milk ingredients are becoming increasingly widespread at farm level. The technical barriers to using farm-manufactured milk concentrate in dairies are minimal, hence the suspicion that the practice of on-farm raw milk concentration is still fairly uncommon for economic reasons. This study, therefore, set out to investigate farmers' potential willingness to adopt a raw milk concentration plant. The empirical analysis was based on discrete choice experiments with 75 German dairy farmers to identify preferences and the possible adoption of on-farm raw milk concentration. The results showed that, in particular, farmers who deemed the current milk price to be insufficient viewed on-farm concentration using membrane technology as an option for diversifying their milk sales. We found no indication that adoption would be impeded by a lack of trustworthy information on milk processing technologies or capital.     

Combining a new baseboard radiator with a fan coil system for improving heating performance and reduce energy consumption

In the present work, the heating performance of a new system combined with a new modified baseboard radiator and fan coil is investigated. Using longitudinal fins with special geometry and also forced airflow at the end of the system causes that at the lower inlet water temperature compared with the conventional models, higher heat output rate be obtained. The heat output rate of the new modified system is obtained by experimental metrology based on the European Standard No. EN-442. Temperature and velocity distribution in the room space is done by simulation of the modified system in the Flovent software. Computational fluid dynamics (CFD) results are validated against experimental results and there is a good agreement between them. Also, the energy consumption of the system during the winter season is calculated in TRANSYS software. Experimental results show that the heat output rate of a new modified heating system with inlet water temperature in the range of 45–55°C is on average 4.17 times higher compared with the conventional model. CFD simulation also showed that the combined system provides good thermal comfort conditions. Energy consumption of the new system reduced about 13% compared with conventional models.     

Genetic and genomic analysis of age at first insemination in Israeli dairy cattle

We performed a genetic analysis of age at first insemination, including estimation of the heritability and genetic correlations with other economic traits, and the consequences of including this trait in the Israeli selection index. The genetic factors affecting age at first insemination were determined via GWAS. Five data sets were analyzed. Data sets 1, 2, and 3 were used to compute variance components among age at first insemination, first calving age, days from first insemination to calving, and the 9 traits included in the Israel breeding index. Heritabilities for age at first insemination, calving age, and days from first insemination to calving in Israeli Holsteins as computed by REML individual animal model analyses of 273,239 Israeli Holstein cows were 0.072, 0.042, and 0.014. The estimated genetic correlation between the first 2 traits was 0.88. In addition to the fact that heritability of age at first insemination is 1.7 times the heritability for calving, the former trait has the advantage that the number of records is greater, and the records are generated earlier. Absolute values of the genetic and residual correlations between age at first insemination and the 9 traits included in the Israeli index were all less than 0.2. Data set 4 included first insemination dates of 1,181,600 calves born from 1985 through 2018. Genetic evaluations were computed by a single trait animal model. Annual phenotypic and genetic trends for age at first calving for calves born since 1985 were “positive,” that is, economically negative, at 0.320 ± 0.003 and 0.169 ± 0.005 d, respectively. Applying the GCTA-GREML software, 54% of variance in the transmitting ability of 1,585 sires could be explained by considering all 40,498 markers included in the GWAS analysis. The significant markers were mainly associated with milk production genes. The SNP UA-IFASA-8854 on chromosome 11 had the lowest probability value, 1.2 × 10^?24. This marker is located between the genes RETSAT and ELMOD3, both of which are overexpressed in human mammary glands. The gene RETSAT is reported to be essential for lipid accumulation and adipogenesis promotion. Gene enrichment analysis found that genes in the genomic region flanking significant markers are associated with vasopressin receptor activity, which was shown to mediate puberty in humans. If age at first insemination is included in the index with a weighting to account for 9% of the index, reductions of 2.8 and 2.6 d for age at first insemination and first calving age after 10 yr of selection are predicted, as compared with reductions of 1.4 and 1.1 d with the current index. Gains for the other index traits are only marginally affected. We suggest selection on age at first insemination as an alternative to selection for early calving.     

Kinetic Monte Carlo simulation of hydrogen production from photocatalytic water splitting in the presence of methanol by 1 wt% Au/TiO2

In this research, using the kinetic Monte Carlo simulation (KMC), the hydrogen production from a water-methanol mixture using Au/TiO₂ photocatalyst is investigated. A mechanism is proposed, and the rate constants of the reaction steps are specified. The reaction rate constants of different steps and the concentration of the active sites on the photocatalyst surface were determined. An excellent match between simulated and experimental data confirms the results. The electron-hole pair production, methanol adsorption on the photocatalyst surface, and electron-hole recombination steps are considered the most critical steps. To study the effects of independent variables (initial concentration of methanol, photocatalyst dosage, pH, and time of reaction) on the produced hydrogen, a combination of KMC simulation and design of experiment was employed. The concentration of photocatalysis has the highest and pH has the lowest effect on the hydrogen production. The optimal conditions for photocatalytic hydrogen production are presented.     

Experimental and numerical investigations on the heat production and thermal storage characteristics of rapid preparation amorphous powder activated coke

The heat production and thermal storage characteristics of rapid-preparation amorphous powder activated coke (RAC) were investigated. RAC was prepared by using a drop-tube reactor system. The natural oxidation characteristics of RAC were studied through combined TG–FTIR analysis and temperature-programmed experiment. Experimental results showed that CO and CO₂ were the main oxidation products of RAC in air, and that the oxidation reaction was in accordance with the Arrhenius equation and law of mass action. Thermal storage characteristics were studied through computational fluid dynamics simulation. The maximum excess temperature θ_max increases linearly with the increase of the initial temperature. The concentration fields of the products show that CO₂ is mainly concentrated in the upper part of the coke bin, and the CO generated by CO₂ at high temperature is mainly concentrated in the central part of the coke bin.     

基于跨临界CO2热泵的茶叶生产能源系统负荷削减潜力

乡村产业中的化石能源设备逐渐被电能技术替代，引起了乡村负荷波动增大、部分时段产生集中高负荷的问题。为了解决以上问题，将低品位清洁能源应用至乡村的茶叶生产中，针对烘茶全过程的工艺要求提出了跨临界CO₂热泵烘茶技术；并以某茶叶生产乡村为对象，对其代表台区的全年日用电量及产茶日负荷进行了分析，得出采用CO₂热泵烘茶后其负荷得到大幅度削减，整体可降低至原负荷的39.6%~46.8%，峰值负荷与平时负荷的比值由原本的13.6降至5.4~6.2。跨临界CO₂热泵应用至农产品生产中可有效缓解乡村供电压力。