一种基于抽取LMS的距离旁瓣抑制方法

在噪声雷达中，传统相关处理方法的距离旁瓣受到时宽带宽积的限制，在有限相关处理时间内得到的距离旁瓣较高，会造成微弱目标被强目标、杂波旁瓣淹没的现象。提出一种基于抽取最小均方（Least Mean Square,LMS）滤波的噪声雷达旁瓣抑制方法，将LMS滤波器的系数作为距离压缩结果，从而获取较低的距离旁瓣。对该方法的性能进行了理论分析，并通过数字仿真验证了算法的有效性和理论分析的正确性。     

基于平均飞行航迹的CCO减噪效用研究

近年来，通过优化飞行程序降低机场飞机噪声影响成为机场环境保护的重要研究方向。文章首先建立了基于飞机“噪声-功率-距离”数据的噪声计算模型，介绍了平均飞行航迹以及连续爬升运行(Continuous Climb Opera-tion, CCO)离场程序的相关理论，最后以大型国际机场为实例，使用飞机平均飞行航迹进行噪声预测，运用综合噪声模型计算出噪声影响面积并绘制噪声影响等值线图，比较了CCO离场相对常规的标准仪表离场(Standard Instru-ment Departure, SID)的降噪效果。结果表明，CCO离场程序可有效降低机场噪声影响，在高噪声级影响区域的降噪效果更佳。     

Adaptive investigation of the optical properties of polymer fibers from mixing noisy phase shifting microinterferograms using deep learning algorithms

In this article, an adaptive denoising method is suggested to accurate investigate the optical and structural features of polymeric fibers from noisy phase shifting microinterferograms. The mixed class of noise that may produce in the phase-shifting interferometric techniques is established. To our knowledge, this is an early study considered the mixing noises that may occur in microinterferograms. The suggested method utilized the convolution neural networks to detect the noise class and then denoising, it according to its class. Four convolution neural networks (Googlenet, VGG-19, Alexnet, and Alexnet–SVM) are refined to perform the automatic classification process for the noise class in the established data set. The network with the highest validation and testing accuracy of these networks is considered to apply the suggested method on realistic noisy microinterferograms for polymeric fibers, polypropylene and antimicrobial polyethylene terephthalate)/titanium dioxide, recoded using interference microscope. Also, the suggested method is applied on noisy microinterferograms include crazing and nanocomposite material. The demodulated phase maps and the three-dimensional birefringence profiles are calculated for tested fibers according to the suggested method. The obtained results are compared with the published data for these fibers and found to be in good agreements.     

基于Matlab的量子激光雷达稳频通信模拟系统设计

传统通信模拟系统设计较为复杂,导致模拟过程消耗能量较大,不能准确模拟稳频通信质量。因此,提出基于Matlab的量子激光雷达稳频通信模拟系统。由于振荡器是雷达形成初始信号源的基础,通过分析振荡电路与相位噪声,获得相位噪声函数与通信频率存在的关系;为确保通信过程的稳定,将准确性与稳定性作为信号质量的评价指标,并采用锁频环稳频技术计算频率偏移程度,根据PID控制算法控制频率,量子激光雷达稳频通信;利用Matlab确定激光器、探测器等硬件组成结构,通过时序与数字阵列的设置完成模拟系统设计。仿真结果表明所提系统结构简便、性能稳定,能够真实模拟出稳频通信的信号质量。     

Various density light field image coding based on distortion minimization interpolation

In recent years, the light field (LF) as a new imaging modality has attracted wide interest. The large data volume of LF images poses great challenge to LF image coding, and the LF images captured by different devices show significant differences in angular domain. In this paper we propose a view prediction framework to handle LF image coding with various sampling density. All LF images are represented as view arrays. We first partition the views into reference view (RV) set and intermediate view (IV) set. The RVs are rearranged into a pseudo sequence and directly compressed by a video encoder. Other views are then predicted by the RVs. To exploit the four dimensional signal structure, we propose the linear approximation prior (LAP) to reveal the correlation among LF views and efficiently remove the LF data redundancy. Based on the LAP, a distortion minimization interpolation (DMI) method is used to predict IVs. To robustly handle the LF images with different sampling density, we propose an Iteratively Updating depth image based rendering (IU-DIBR) method to extend our DMI. Some auxiliary views are generated to cover the target region and then the DMI calculates reconstruction coefficients for the IVs. Different view partition patterns are also explored. Extensive experiments on different types LF images also valid the efficiency of the proposed method.     

应用于光遗传学的集成式注入型生物光电极器件的研究进展

光遗传学是一门涉及神经科学、光学、半导体光电子学及生物医学的交叉科学.把光作为一种遗传学的研究工具,可为神经科学研究提供更高效、精准的神经调控手段,也为临床精神疾病的研究和治疗提供了新的思路.集成式注入型生物光电极是一种集刺激神经元的光源与采集生物电信号的微电极于一体的多功能生物微探针,在利用活体生物进行的光遗传学研究中有着重要的应用.文章回顾了光遗传学的历史,对集成式注入型生物光电极器件的分类和发展进行了分析,详细比较了不同类型光电极器件在结构和性能上的差异,从电学特性、噪声信号、生物兼容性及可靠性等方面进行评价.最后,对光电极器件的未来发展进行了初步的探讨.     

Large eddy simulation of flow over square cylinder arrays in an octagonal configuration at subcritical Reynolds numbers

In this study, fluid flow over an array of eight, 0.029 m × 0.029 m, square cross‐section cylinders in an octagonal configuration is studied numerically. The mean force coefficients (drag and lift) and the vortex formation characteristics of the array are calculated numerically by utilizing a three‐dimensional large eddy simulation mathematical model for turbulence. The numerical simulation is performed with commercial software ANSYS Fluent 19R1. To investigate the parametric influences, three spacings between the cylinders (0.07, 0.14, and 0.2 m), two array attack angles (0° and 15°), and two Reynolds numbers (4060 and 45 800) are considered. The results comprise flow patterns and force coefficients' variations with Reynolds numbers. The lift force of the downstream cylinder reaches its maximum at α = 15°, and the drag force of the upstream cylinders finds its peak at α = 0°. It is observed through velocity and viscosity contour plots that vortex formation length near the cylinder increases at higher Reynolds number. Velocity vector plots are also presented to show fluid flow behavior near the cylinder. Furthermore, the predicted mean forces on the cylinders are slightly different for different Reynolds numbers, spacings, and angles of attack.     

基于LP与小波包的复杂机电系统监测序列混沌降噪方法

针对流程工业生产系统监测数据存在强噪声和混沌性的特点,提出了一种局部投影方法(Local Projection Method)与小波包方法相结合的信号降噪方法。该方法先利用局部投影方法从动力学系统嵌入流形的角度进行多次迭代降噪,并根据关联维数来判定迭代终止;再利用小波包方法从频率的角度进行降噪,抑制高频噪声的干扰,取得了较好的降噪效果。用Lorenz时间序列进行仿真验证,对仿真时间序列加入不同程度的噪声,对比分析小波包、局部投影与该方法降噪后的相空间、SNR值和最大Lyapunov指数,证明了该方法对于中高强度噪声具有更好的降噪效果。并将该方法用于某压缩机组的实际监测数据降噪,评估三种方法的降噪效果,进一步验证了该方法的优越性。     

Stochastic stabilization and destabilization of nonlinear and time‐varying hybrid systems by noise

The aim of this article is to design a suitable strength function g(t,x,r(t)) such that the Wiener noise g(t,x(t),r(t))dw(t) either stabilizes or destabilizes a given nonlinear and time‐varying hybrid system . To this end, the basic properties, including the existence and uniqueness of the local and global solutions and the nonzero property of solutions of the nonlinear and time‐varying hybrid stochastic systems, are first investigated as the theoretical basis of the article. Second, two theorems and the corresponding corollaries on the stability and instability of the hybrid stochastic systems are established. Third, the design method for the noise strength g(t,x,r(t)) is then proposed based on the established theorems. We also point out that the Markov jump r(t) may have a stabilizing (respectively, destabilizing) effect when we design the noise strength g(t,x,r(t)) so that the introduced noise g(t,x(t),r(t))dw(t) stabilizes (respectively, destabilizes) the corresponding hybrid system. Finally, we illustrate our method using two examples. Compared with the existing literature, our method is suitable for a wider class of nonlinear and time‐varying systems with weaker conditions than quasi‐linear systems.     

Differences between oculomotor and perceptual artifacts for temporally limited head mounted displays

We used perceptual and oculomotor measures to understand the negative impacts of low (phantom array) and high (motion blur) duty cycles with a high‐speed, AR‐likehead‐mounted display prototype. We observed large intersubject variability for the detection of phantom array artifacts but a highly consistent and systematic effect on saccadic eye movement targeting during low duty cycle presentations. This adverse effect on saccade endpoints was also related to an increased error rate in a perceptual discrimination task, showing a direct effect of display duty cycle on the perceptual quality. For high duty cycles, the probability of detecting motion blur increased during head movements, and this effect was elevated at lower refresh rates. We did not find an impact of the temporal display characteristics on compensatory eye movements during head motion (e.g., VOR). Together, our results allow us to quantify the tradeoff of different negative spatiotemporal impacts of user movements and make subsequent recommendations for optimized temporal HMD parameters.