The microstructure and magnetic properties of Ca2+ ion doped GdCrO3

In this paper, the crystal structure, vacancy defect, local electron density and magnetic properties of Gd_1-xCa_xCrO₃ (0 ≤ x ≤ 0.3) polycrystalline samples were investigated systematically. The crystal structural analyses show that all the samples are orthorhombic phase and a structural distortion happens around x = 0.3. Due to the formation of Cr⁴⁺ ions, both the lattice constant and the Cr–O bond length decrease. The results of positron annihilation spectrum reveals that the vacancy defect concentration increases and the local electron structure changes with the introduction of Ca²⁺ ions. The field-cooled (FC) and zero-field cooled (ZFC) curves of Gd_1-xCa_xCrO₃ samples measured under H = 100 Oe exhibits negative magnetization characteristics due to the interaction between Gd³⁺ and Cr³⁺ ions, and the magnetism can be affected by the structural distortion.     

Noncentrosymmetric Tetrel Pnictides RuSi4P4 and IrSi3P3: Nonlinear Optical Materials with Outstanding Laser Damage Threshold

Noncentrosymmetric (NCS) tetrel pnictides have recently generated interest as nonlinear optical (NLO) materials due to their second harmonic generation (SHG) activity and large laser damage threshold (LDT). Herein nonmetal-rich silicon phosphides RuSi₄P₄ and IrSi₃P₃ are synthesized and characterized. Their crystal structures are reinvestigated using single crystal X-ray diffraction and ²⁹Si and ³¹P magic angle spinning NMR. In agreement with previous report RuSi₄P₄ crystallizes in NCS space group P1, while IrSi₃P₃ is found to crystallize in NCS space group Cm, in contrast with the previously reported space group C2. A combination of DFT calculations and diffuse reflectance measurements reveals RuSi₄P₄ and IrSi₃P₃ to be wide bandgap (E_g) semiconductors, E_g = 1.9 and 1.8 eV, respectively. RuSi₄P₄ and IrSi₃P₃ outperform the current state-of-the-art infrared SHG material, AgGaS₂, both in SHG activity and laser inducer damage threshold. Due to the combination of high thermal stabilities (up to 1373 K), wide bandgaps (≈2 eV), NCS crystal structures, strong SHG responses, and large LDT values, RuSi₄P₄ and IrSi₃P₃ are promising candidates for longer wavelength NLO materials.     

The effects of hydrogen-induced lattice distortion and Nb-D formation on its permeation through niobium

Abnormal permeation behavior of hydrogen through niobium has been investigated in this paper, i.e. the permeation flux saturated with long-term decrease after reaching a maximum. The diffusivity and permeability have been deduced from the decay edge of permeation transient. Three kinds of polycrystalline niobium foils with different annealing temperature have been compared, to verify the effect of defects and grain properties on the permeability and diffusivity. In the temperature range of (773–1023) K, the heat treatment along with the permeation cycles could either reduce or increase the permeability and diffusivity depending sensitively on temperature and showing a temperature threshold around 950 K. The permeation flux is proportional to square root of pressure, revealing that the abnormal permeation was still bulk diffusion-limited. The diffusivity gradually decreased with permeation cycles, and became more and more sensitive to pressure. The niobium foil expanded macroscopically along the gradient of hydrogen concentration, which reveals the strong and unrecoverable lattice distortion in this temperature and pressure range. The X-ray diffraction studies showed that splitting of all the Nb peaks and shifting of Nb-D peaks along with hydrogen loadings. The phase transition was expected to eliminate the lattice strain during hydrogen loading and which in turn acted as a diffusion barrier.     

The influence of brewing method on bioactive compounds residues in spent coffee grounds of different roasting degree and geographical origin

The content of bioactive compounds in spent coffee grounds (SGC) was studied. SGC were obtained from Coffea arabica beans of different roasting degrees (light and dark) and different geographical origins (Nicaragua, Columbia and Mexico) processed using four brewing methods (mocha, filtered, drip and infusion). The highest caffeine and chlorogenic acid contents were determined in filtered spent coffee extracts. All extracts of light roasted spent coffee grounds showed lower browning index levels in comparison to that from dark roasted spent coffee grounds. Generally, the highest content of total polyphenolic compounds and highest antioxidant capacity were determined in extracts prepared in drip. In conclusion, the results obtained in this study indicate that the spent coffee grounds produced of domestic levels, especially those obtained from filter coffeemaker, could be considered as a good source of natural antioxidants.     

Features of crystal structures and thermo-mechanical properties of weberites RE3NbO7 (RE=La,Nd, Sm,Eu, Gd) ceramics

The features of crystal structures, thermo-mechanical properties and their dominant mechanisms of weberites RE₃NbO₇ were studied as high-temperature oxides. We concentrated on connections between structures and thermo-mechanical properties, the influences of bond lengths, lattice distortion degrees and microstructures on these properties were estimated. The shortening of bond length and increment of bonding strength would lead to the increase of mechanical properties. The Vickers hardness (4.5-7.8 GPa) and toughness (0.5-1.6 MPa·m^1/2) of weberites RE₃NbO₇ are enhanced by grain refinement and increment of bond strength, while crystal structures, bond lengths, and lattice distortion degrees influenced their Young's modulus (100-170 GPa). Nano-indentation was applied to test the influence of microstructures on modulus and hardness. The dominant mechanisms for mechanical properties and thermal conductivity were proposed, which was conducive to properties tailoring and engineering applications of weberites RE₃NbO₇ oxides.     

Phase-change regulation criterion based on size-dependent lattice distortion rate and born theory for VO2 nanomaterials

Vanadium dioxide (VO₂) is a promising thermally induced phase transition material because of the abrupt changes in electrical and optical properties. However, the high phase transition temperature of VO₂ and its unspecified modulation relationship need to be resolved urgently. Herein, we proposed a simple and precise regulation criterion for VO₂ materials based on size-dependent lattice distortion rate and Born theory. The results indicated that the application of a tensile stress changed the elastic properties of the VO₂, which promoted VO₂ phase transition, and regulated the phase transition temperature. Moreover, the specific modulation relationship between the stress and phase transition temperature of VO₂ was confirmed experimentally. These results show that our criterion provides theoretical guidance to regulate VO₂ thermally induced phase transition materials.     

瞬态闭锁试验在0.13 μm大规模集成电路中引起的潜在损伤

瞬态剂量率辐射试验会引起集成电路发生损伤或失效，其原因至少有两种：闭锁大电流引起的电路内部金属互连熔融；累积电离总剂量引起的氧化层电荷造成阈值电压偏移。本文以一种0.13 μm体硅CMOS处理器为对象，研究了瞬态剂量率和稳态电离总剂量辐射效应规律。结果表明：瞬态剂量率闭锁效应对处理器造成了显著的潜在损伤，导致其总剂量失效阈值从1 030 Gy(Si)降低至600 Gy(Si)。研究结论对于大规模集成电路的可靠性评估和指导辐射加固设计有重要参考意义。     

新时代长江鱼类多样性保护的思考

长江是我国第一大河流,是世界生物多样性的热点区域,也是我国鱼类多样性最高的河流之一。在介绍长江鱼类主要生态习性生境条件的基础上,分析了导致鱼类多样性下降的主要因素——生境丧失和过度捕捞,并简要总结了目前已采取的保护措施及存在的问题,提出了关于新时期长江鱼类多样性保护的思考与建议:①建立以流域管理机构牵头,相关部门和地方共同组建流域生态保护机制;②有计划开展支流及通江湖泊的生态恢复,使支流的小水电逐步退出,使原本的通江湖泊恢复自然江湖关系;③提高民众环保意识,积极建立全流域禁捕机制和休闲垂钓机制,并让垂钓者成为渔政的管理者和监督者。     

总变差模型在书画打印宣纸印刷质量预测中的应用

为了建立适用于书画打印宣纸印刷质量的预测模型,本研究测量了14种书画打印宣纸的粗糙度、白度、不透明度、定量、光泽度和针对宣纸特别设定的帘纹深浅以及帘纹疏密度等表面物理参量,并在相同条件下,使用喷墨打印设备输出并测量印品色度值,利用总变差模型构建去除帘纹色差的测定方法,得到与人眼视觉特征相符的色差。运用GRNN广义回归神经网络结合书画打印宣纸表面物理参量与宣纸去帘纹后的色差值,建立预测模型。结果表明,该模型能够在仅测量书画打印宣纸表面物理参量的情况下,便能较为准确地预测书画打印宣纸印刷质量,为书画打印宣纸印刷前的选纸工作提供指导依据。     

基于自回归谱外推的全聚焦成像分辨力提升

针对相邻缺陷全聚焦超声成像混叠问题，结合低阶、宽有效频带自回归谱外推方法，压缩超声波时域脉冲宽度，实现亚波长级全聚焦（Total focusing method，TFM）成像分辨力。建立碳钢试块模型，设置两个中心间距1.8 mm，直径1.3 mm圆孔，选用中心频率2.25 MHz，32阵元相控阵探头采集全矩阵数据。针对全矩阵数据，选择自回归阶数为2，信号频谱最大幅值下降14 dB为有效频带，建立自回归模型并外推有效频带外的高频与低频成分，随后对全矩阵数据进行延迟叠加处理和TFM成像。仿真结果表明，低阶、宽有效频带自回归谱外推处理方法具有较高的鲁棒性和准确性，TFM成像后可有效分离中心间距0.7λ（λ为超声波长）圆孔，保留缺陷横向位置信息的同时，定位误差不超过0.73%。对碳钢试块中相同位置及尺寸的圆孔进行试验验证，定位误差不超过1.06%，有效地提高TFM成像分辨力。