Evidence of fluid evolution of Baoshan Cu−Pb−Zn polymetallic deposit: Constraints from in-situ sulfur isotope and trace element compositions of pyrite

In-situ LA-ICP-MS and S isotopes of pyrite from the Baoshan Cu polymetallic deposit were conducted to investigate the ore-forming process and the enrichment mechanism of elements. Three generations of pyrite (Py I, Py II, and Py III) in the skarn-type ores and pyrite in the carbonate-hosted sulfide ores from central, western, and northern (C_Py, W_Py, and N_Py) mining districts are selected for comparison. Compared with Py I and Py III, the contents of most elements in Py II are apparently higher. The As and Se contents are high within a wide range and are decoupled in the growth band of the C_Py. The highest As, Se, and Pb contents were found in W_Py and N_Py. These results indicate the drastic changes in the temperature and fluid mixing during the mineralization. The occurrence of fluctuation and change in temperature and f(O₂) was triggered by intermittent pulses of magmatic-hydrothermal fluids, mixing with meteoric water, and water−rock interactions. The sulfur isotopes of all species of pyrite indicated the magmatic source. The change in the f(O₂) conditions caused slight differences in the sulfur isotope compositions. Consequently, a metallogenic model was proposed to explain the ore-forming processes.     

催化共振光散射法测定空气中痕量甲醛的研究

吖啶橙分子聚集体微粒可在513nm波长处出现最大的共振光散射强度(RLS)。在稀硫酸介质中,甲醛能催化溴酸钾氧化吖啶橙的反应,促使其RLS强度减弱。在最佳实验条件下,甲醛质量浓度ρ在0.020～0.25μg/mL的范围内与△I值呈良好的线性关系,线性回归方程为△I=1113.99ρ+49.23,线性相关系数r为0.9986。本法与国标法进行对照,在置信度等于95%时,用Cochran检验,两种方法间不存在显著性差异,方法操作简单、灵敏度高,用于室内外空气中甲醛测定,结果满意。     

基于三维纳米阵列结构的表面增强拉曼技术研究及其在痕量铀酰离子探测中的应用

表面增强拉曼散射(SERS)是一种新型痕量表征技术，其灵敏度高、样品用量少、特征谱易辨识，尤其适用于铀酰离子等危化品的探测。在过去十几年里, 纳米材料和纳米技术在新兴技术和SERS的应用方面获得了长足发展，将先进的纳米制造技术引入了SERS领域。本文总结了利用光刻、原子层沉积等技术，开发了一系列高质量的三维阵列纳米材料作为SERS基底，并应用于痕量铀酰离子的检测。其中，以Al₂O₃、HfO₂等惰性氧化物包裹修饰的银纳米棒三维阵列作为基底，灵敏度高，稳定性好，根据不同特征的拉曼振动频谱，可识别多个不同种态的铀酰离子，检出限低至nmol/L，具有潜在的实际应用价值。     

针对多种处理痕迹的数字语音取证算法

现有的数字语音取证研究主要集中于对单一的某种操作进行检测，无法对不相关的操作进行判断。针对该问题，提出了一种能够同时检测经过变调、低通滤波、高通滤波和加噪这四种操作的数字语音取证方法。首先，计算语音的归一化梅尔频率倒谱系数（MFCC）统计矩特征；然后通过多个二分类器对特征进行训练，并组合投票得到多分类器；最后使用该多分类器对待测语音进行分类。在TIMIT以及UME语音库上的实验结果表明，归一化MFCC统计矩特征在库内实验中均达到了97%以上的检测率，且在对MP3压缩鲁棒性测试的实验中，检测率仍能保持在96%以上。     

再生混凝土抗压强度试验研究

设计3种不同再生骨料取代率的再生混凝土立方体试件，分别在7 d、14 d、28 d、100 d龄期进行抗压强度试验，结果表明：长龄期再生混凝土立方体抗压强度有所增大，但高取代率比低取代率的抗压强度降低，再生混凝土后期强度增长速率高于普通混凝土。对试验室实测的再生混凝土立方体抗压强度与试验龄期进行拟合，拟合结果相关系数均大于0.97，吻合结果较好。     

Progressive fracture processes around tunnel triggered by blast disturbances under biaxial compression with different lateral pressure coefficients

To investigate the progressive fracture processes around a tunnel triggered by static stress and dynamic disturbance, experiments and numerical simulations were performed. The results show that the spatial distributions of acoustic emission (AE) events become very different as lateral pressure coefficients change. The combined effect of static stress and dynamic disturbance causes the damage around the tunnel, and initial stress conditions control the damage morphology. The blast disturbance cannot fundamentally change the damaged area but will deepen the extent of damage and accelerate the failure speed. The more significant the difference between the vertical and horizontal stresses is, the higher the impact on the tunnel by the dynamic disturbance is. The AE activity recovers to a relatively stable state within a short time after the blast and conforms to power-law characteristics.     

Correlation between B value deviation and sintering temperature of perovskite solid solution materials

The effects of different sintering temperatures on the system of Ba_0.5Sr_0.5TiO₃–La_0.8Ca_0.2MnO₃ (BST-LCM) material were investigated by means of scanning electron microscopy, X-ray, resistance-temperature measurements, and X-ray photoelectron spectroscopy. X-ray diffraction and X-ray photoelectron spectroscopy confirm that BST-LCM is completely miscible and BST is the main phase, which under the premise of following the theory of small polaron conduction, titanium ions interact with manganese ions, which affects the electrical properties of the system of BST-LCM material. For the electrical properties of related, the LCM content is inversely proportional to the activation energy. Through the linear fitting of the experimental data, the empirical formula between the sintering temperature B value and the content of solid solution is obtained, and the approximate B value within a certain range can be preliminarily calculated.     

黔西南某中高硫煤脱硫过程中微量元素的分配特性研究

为探究黔西南某中高硫煤中微量元素的富集程度,以及在脱硫降灰提质利用过程中微量元素的分配特性,通过摇床对其脱硫降灰进行了试验研究,并在合适的分选工艺条件下,考察了原煤、精煤和尾煤产品中微量元素的分配特征。通过“一粗一精一扫”重选,可获得产率32.83%、硫分0.96%、灰分11.16%的合格精煤产品。分选产品微量元素分析结果表明,该分选工艺对Cu、Sb、As、Co、Mo、TI、Ni等有害元素具有较好的脱除效果,并能一定程度富集锂和稀土等有价微量元素。通过此工艺可分别回收28.73%和47.37%的锂至精煤和中煤产品,精煤煤灰中Li₂O理论含量达5 258 μg/g,具有综合回收利用价值。研究结果可为该类中高硫煤炭资源的清洁与综合利用提供参考。     

柴达木盆地三湖坳陷横波勘探中的低幅异常消除技术

近年来,在柴达木盆地三湖坳陷开展了横波地震勘探,但是由于该区低幅度构造发育,横波静校正引起的"低幅"异常与上述低幅度构造相互混杂,难以区分。为此,针对该区横波表层调查难以控制表层横波速度模型的变化、横波近偏移距初至污染严重、横波折射层发育导致高速界面难以确定等问题,首先采用曲线拟合技术预测污染区横波初至时间确保初至完整性,然后采用面波模型与多层折射分层联合约束反演横波表层速度,最后通过基于速度谱分析的层位匹配建模技术确定合理的横波速度界面,形成了横波表层"低幅"异常消除技术,并进行了现场应用及效果评价。研究结果表明:①曲线拟合技术可以弥补近道污染区横波初至空白,保证层析反演模型的完整性;②基于瑞雷波的频散特性反演建模可以为确定该区浅层横波速度提供可靠的资料,提高浅层模型精度;③面波模型与多层折射分层联合约束反演能够更准确的反演该区表层横波速度场,较好地建立横波速度模型,消除横波剖面上"低幅"异常现象。结论认为,所形成的横波地震勘探低幅异常消除技术消除了横波静校正引起的"低幅"异常现象,提高了横波地震资料的成像品质。     

Evaluation of microbial toxins,trace elements and sensory properties of a high-theabrownins instant Pu-erh tea produced using Aspergillus tubingensis via submerged fermentation

Theabrownins (TB) are polymeric phenolic compounds associated with the multiple bioactivities of Pu-erh tea, a post-fermented Chinese dark tea. High-TB instant Pu-erh tea was produced via a novel submerged fermentation (SF) using Aspergillus tubingensis and compared with samples produced commercially via the conventional solid-state fermentation (SSF). Viable microorganisms and microbial toxins, especially aflatoxins B₁, G₁, B₂, G₂, cyclopiazonic acid, fumonisins B₁, B₂, B₃ and ochratoxin A, were below the detection limit in all samples. Fewer microbial metabolites were found in SF instant tea compared with the SSF teas. Based on an adult consuming 1 g of instant Pu-erh tea daily, the dietary intake of investigated elements was below the safe limits recommended by various authorities. Tasters viewed the instant tea infusions as very mild, smooth, mellow and full. This suggested that submerged fermentation using A. tubingensis offers a speedy and safe alternative to commercial production of instant Pu-erh tea.