排序方式: 共有33条查询结果,搜索用时 15 毫秒
1.
AlN自蔓延高温合成的工艺研究 总被引:1,自引:0,他引:1
本研究成功地进行了Al粉在N2中的自蔓延高温合成。讨论了稀释剂添加量,氮气压力、试样孔隙率对合成的影响,发现Al熔化是影响自蔓延高温合成中Al的氮化率的主要原因。 相似文献
2.
研究了保护性气氛Ar气压力对燃烧合成TiC:WC=5:5的单相(W,Ti)C碳含量的影响。研究表明,在0.1-0.3MPaAr气压力范围内,增加Ar气压力,可阻碍燃烧坯体的膨胀或裂纹的出现,从而提高(W,Ti)C中的合成碳含量,并有利于其中游离碳含量的控制,当预热温度为800℃、Ar气压力为0.2和0.3MPa时,(W,Ti)C中游离碳含量分别为0.062%、0.32%。以0.3MPaAr气压力下合成的(W,Ti)C粉末与WC及Co粉为原料烧结制备YT15硬质合金时,WC在(W,Ti)C中有一个继续固溶过程,烧结后的合金硬度为92.1HRA、横向断裂强度为13251.9MPa。 相似文献
3.
Mixture of green petroleum coke, B4 C and SiC together with short carbon fiber were employed as starting materials, the mixture was press formed without any binder after grinding, dense and homogeneous binderless SiC-B4 C-C(carbon/ceramic) composites were then obtained after sintering. Composites thus prepared possess excellent anti-oxidation property, that is, mass loss less than IG within the temperature range from 900 to 1 100 ℃ for 10 h. Anti-oxidation mechanism was also discussed from the viewpoint of thermodynamics, excellent anti-oxidation property of materials thus prepared can be discribed to 1) solid SiO2 formed from SiC, which restrains the filtering of oxygen and simultaneously, its volume expansion brought about by the reaction takes roles both walling up the original pores and making the material more compact; 2) liquid B2O3 from the reaction of B4C not only makes the combination with C, B4 C and SiC tighter through forming solid solution, but also effect of reaction SiC(s)+2CO(g) =SiO2 (s)+3C(s) is an expansive process, which improves the microstructure of the material. 相似文献
4.
在传统熔融沉积方法的基础上, 采用颗粒混合料和螺杆挤出机构3D打印制备了致密和多孔氧化锆陶瓷, 系统研究了颗粒原料的打印性能、坯体显微结构特征和陶瓷材料的力学性能。研究结果表明, 该方法可以实现倾角达165°和跨度为5.5 mm的无支撑结构的打印成型。研究了两种打印路径对致密氧化锆陶瓷抗弯强度及抗弯强度Weibull模数的影响, 结果表明与传统单线填充模式相比, “单线+矩形”复合填充模式可以得到更高致密度和更优力学性能的陶瓷(抗弯强度达到637.8 MPa, Weibull模数达到9.10)。研究了不同气孔率多孔氧化锆陶瓷的压缩力学行为, 结果表明陶瓷的抗压强度和气孔率之间存在复合指数规律, 低气孔率时异面压缩的应力-应变曲线只呈现弹性阶段, 高气孔率时出现弹性阶段和坍塌阶段, 均未出现密实阶段。 相似文献
5.
6.
7.
8.
9.
1 压降对传热的影响隧道窑结构一般可分为预热带、烧成带和冷却带。窑内加热制品用的高温燃烧气体的流动方向与制品的运行方向相反 ,形成对流。其工作过程为燃料燃烧的火焰及生成的燃烧产物在烧成带加热制品后 ,由烧成带向预热带流动 ,同时不断预热陶瓷坯体 ,烟气的温度逐步降低 ,最后烟气自预热带的排烟口、烟道经烟囱排出窑外。其传热过程可以认为在预热带主要以对流换热为主 ,烧成带则主要是通过对流和辐射共同作用来进行热量交换 ,窑内传热属于逆流式热交换器的类型。高温烟气流经烧成带和预热带所引起的压力降 ,近似地由范宁公式和气… 相似文献
10.