Matrix Manipulation of Directly-Synthesized PbS Quantum Dot Inks Enabled by Coordination Engineering

The direct-synthesis of conductive PbS quantum dot (QD) ink is facile, scalable, and low-cost, boosting the future commercialization of optoelectronics based on colloidal QDs. However, manipulating the QD matrix structures still is a challenge, which limits the corresponding QD solar cell performance. Here, for the first time a coordination-engineering strategy to finely adjust the matrix thickness around the QDs is presented, in which halogen salts are introduced into the reaction to convert the excessive insulating lead iodide into soluble iodoplumbate species. As a result, the obtained QD film exhibits shrunk insulating shells, leading to higher charge carrier transport and superior surface passivation compared to the control devices. A significantly improved power-conversion efficiency from 10.52% to 12.12% can be achieved after the matrix engineering. Therefore, the work shows high significance in promoting the practical application of directly synthesized PbS QD inks in large-area low-cost optoelectronic devices.     

Reference guided image super-resolution via efficient dense warping and adaptive fusion

Due to the limited improvement of single-image based super-resolution (SR) methods in recent years, the reference based image SR (RefSR) methods, which super-resolve the low-resolution (LR) input with the guidance of similar high-resolution (HR) reference images are emerging. There are two main challenges in RefSR, i.e. reference image warping and exploring the guidance information from the warped references. For reference warping, we propose an efficient dense warping method to deal with large displacements, which is much faster than traditional patch (or texture) matching strategy. For the SR process, since different reference images complement each other, and have different similarities with the LR image, we further propose a similarity based feature fusion strategy to take advantage of the most similar reference regions. The SR process is realized by an encoder–decoder network and trained with pixel-level reconstruction loss, degradation loss and feature-level perceptual loss. Extensive experiments on three benchmark datasets demonstrate that the proposed method outperforms state-of-the-art SR methods in both subjective and objective measurements.     

Vulnerable objects detection for autonomous driving: A review

Object detection performed by Autonomous Vehicles (AV)s is a crucial operation that comes ahead of various autonomous driving tasks, such as object tracking, trajectories estimation, and collision avoidance. Dynamic road elements (pedestrians, cyclists, vehicles) impose a greater challenge due to their continuously changing location and behaviour. This paper presents a comprehensive review of the state-of-the-art object detection technologies focusing on both the sensory systems and algorithms used. It begins with a brief introduction on the autonomous driving operations and challenges. Then, different sensory systems employed on existing AVs are elaborated while illustrating their advantages, limitations and applications. Also, sensory systems employed by different research are reviewed. Moreover, due to the significant role Deep Neural Networks (DNN)s are playing in object detection tasks, different DNN-based networks are also highlighted. Afterwards, previous research on dynamic objects detection performed by AVs are reviewed in tabular forms. Finally, a conclusion summarizes the outcomes of the review and suggests future work towards the development of vehicles with higher automation levels.     

A novel approach for bulk micromachining of 4H-SiC by tool-based electrolytic plasma etching in HF-free aqueous solution

Bulk micromachining of single-crystal SiC has been challenging due to its extreme stability both mechanically and chemically. To address this issue, a novel tool-based electrolytic plasma etching method is proposed, with which micropatterns and micro-holes are fabricated in SiC in a hydrofluoric acid-free aqueous solution with no need for masks. The material removal is the result of the combined effects of electrolytic plasma chemistry and physics. The chemistry refers to the reaction of Si with hydroxyl radical to form various SiO_x and with H to form silanes, and the reactions of C to form volatile carbon oxides or hydrocarbons, all of which are accomplished and enhanced under the electrolytic plasma atmosphere. Besides, the local high temperature of plasma thermally promotes the evaporation or dissolution of SiO₂ in NaOH solution. The tool-based electrolytic plasma etching method provides alternative approaches for the fabrication of SiC-based MEMS and devices.     

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape.     

Nitrate Additives Coordinated with Crown Ether Stabilize Lithium Metal Anodes in Carbonate Electrolyte

Lithium metal anodes (LMAs) are promising for next-generation batteries but have poor compatibility with the widely used carbonate-based electrolytes, which is a major reason for their severe dendrite growth and low Coulombic efficiency (CE). A nitrate additive to the electrolyte is an effective solution, but its low solubility in carbonates is a problem that can be solved using a crown ether, as reported. A rubidium nitrate additive coordinated with 18-crown-6 crown ether stabilizes the LMA in a carbonate electrolyte. The coordination promotes the dissolution of NO₃⁻ ions and helps form a dense solid electrolyte interface that is Li₃N-rich which guides uniform Li deposition. In addition, the Rb (18-crown-6)⁺ complexes are adsorbed on the dendrite tips, shielding them from Li deposition on the dendrite tips. A high CE of 97.1% is achieved with a capacity of 1 mAh cm⁻² in a half cell, much higher than when using the additive-free electrolyte (92.2%). Such an additive is very compatible with a nickel-rich ternary cathode at a high voltage, and the assembled full battery with a cathode material loading up to 10 mg cm⁻² shows an average CE of 99.8% over 200 cycles, indicating a potential for practical use.     

高空间照明均匀度植物光源系统的设计

传统的植物照明设计只针对单一参考面均匀度进行评价，难以满足植物在整个生长过程中对均匀光照环境的需求。针对这一问题，首先提出了空间照明均匀度评价体系，并基于该体系设计了一种复合光源模块的立体化照明系统，以期构建照明均匀的植物生长空间。进一步利用Taguchi方法优化实验过程，在结合ANOVA分析的基础上，获得了最优结构参数。最后对所得最优解进行灯珠形状分析和植物生长过程中的照明效果测试。实验结果表明:最优结构可提供一个水平参考面照度均匀度为87.22%，混色均匀度为90.11%；竖直参考面照度均匀度93.02%，混色均匀度91.43%的均匀照明空间。该植物光源系统可满足植物生长过程中对均匀空间照明环境的需求。     

The origin of interfacial delamination in Au/ceramic cofired LTCC structure

The interfacial delamination of electrode/ceramic multilayer structure will seriously damage the reliability of low temperature co-fired ceramic (LTCC) module in practical applications. In this work, three kinds of glasses employed in Au electrode are designed and prepared to study the abnormal expansion and delamination process in the Au/ceramic LTCC multilayer structure. The interfacial delamination in the co-fired structure is found to be attributed to the abnormal expansion of glass in respect to Au electrode at high temperature, which is originated from the enlarged closed pores during the co-firing process. This conclusion is further confirmed by co-firing the sample in a low-pressure condition. The mechanism and elimination of interfacial delamination here provides a feasible solution for the design of novel glasses in Au electrode for LTCC applications.