Improving water retention of chicken breast meats by CaCl2 combined with pulsed electric fields

Frozen poultry meat is the most widely consumed animal-based food. However, water loss often leads to quality loss of poultry meat. Therefore, the present study sought to investigate the combined effect of calcium chloride (CaCl₂) and pulsed electric fields (PEF) treatment on chicken breast meats and the mechanisms underlying protein degradation. The results showed that the synergistic effect was superior to the single treatment. Compared with the untreated group, the combination of CaCl₂ and PEF increased water holding capacity of chicken breast meats by 16.61% and decreased cooking loss by 28.93%. Low-field nuclear magnetic resonance (LF-NMR) results indicated that the synergistic treatment promoted water molecules' binding capacity in myofibrils of poultry meat, which exhibited higher immobilised water. Additionally, the combination of CaCl₂ and PEF led to increased degradation of proteins of high-molecular weight and surface hydrophobicity of myofibrillar protein. Furthermore, the extension of the protein molecule and microenvironmental changes promoted interaction between protein and water. In conclusion, the synergistic treatment of CaCl₂ and PEF enhanced water retention and improved physicochemical properties of the myofibrillar protein in chicken breast meats.     

Molecular design for thermally stable SiZrBOC structure from single source precursor with high ceramic yield

A new type of high-temperature-resistant SiZrBOC ceramics was prepared by sol-gel method using polymethyl-hydro siloxane (PMHS), boric acid (B(OH)₃), and n-propyl zirconate (Zr(OPr)₄) as raw materials. After high-temperature pyrolysis, the SiZrBOC precursor was transformed into a crystalline ceramic material with a yield of 89.5 wt%. Fourier infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA) were applied to characterize the polymer-ceramic conversion process and thermal behavior of ceramic precursors. According to the results, the addition of boron elements led to the formation of Si-O-B links in the system. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to study the phase composition and microstructure of SiZrBOC ceramics. Finally, the oxidation test at 1200 °C revealed that SiZrBOC ceramics with a boron/zirconium molar ratio of 2.5:1 exhibited the best oxidation resistance at a weight gain of 0.4 wt% only.     

A kinetic model involving oxidation and volatilization in SiC-B4C-xAl2O3 ceramics system

In this paper, a new kinetic model considering both oxidation and volatilization kinetics is established and applied to analyze the oxidation of SiC-B₄C-xAl₂O₃ ceramics and other systems in various oxidation conditions. The effects of diffusion area and volume changes during the oxidation process are considered in this model. The physical meaning of each parameter in this model is explicit and simple. According to this model, the diffusion coefficient of species and the corresponding diffusion activation energy are easily available. The practicability of this model is well verified by the experimental data of SiC-B₄C-xAl₂O₃ and other systems oxidized under different conditions. In addition, the practice shows that the model is applicable not only to the systems where oxidation and volatilization coexist, but also to the system where only oxidation plays a major role. We hope the model proposed in this work can be used in other materials with more complex environments.     

Enhancement in the osteogenesis and angiogenesis of calcium phosphate cement by incorporating magnesium-containing silicates

Based on the good osteogenic and angiogenic effects of silicon and magnesium elements, three types of micro-nano magnesium-containing silicates (MS), including akermanite (Ake, Ca₂MgSi₂O₇), diopside (Dio, CaMgSi₂O₆) and forsterite (For, Mg₂SiO₄), were incorporated into calcium phosphate cement (CPC) to improve its osteogenic and angiogenic performances for clinical application. In this present work, the physicochemical properties, osteogenesis and angiogenesis of MS/CPCs (Ake/CPCs, Dio/CPCs and For/CPCs) were investigated systematically and comparatively. The results showed that all MS/CPCs had good biomineralization and significantly stimulated the osteogenic differentiation of mBMSCs and angiogenic differentiation of HUVECs, respectively. Besides, the stimulating effects were related to not only the category of MS, but also the content of MS. The For/CPCs had a good angiogenic property but their initial setting times were beyond 60 min. The Dio/CPCs showed the lowest biological performance among the three groups of MS/CPCs due to the lower ion release (Si and Mg). The Ake was the ideal modifier that could provide CPC with appropriate physicochemical properties, better osteogenesis and angiogenesis. Simultaneously, a higher addition (10 wt%) of akermanite resulted in the best potential to bone regeneration. Taken together, this research provides an effective approach to improve the overall performance of CPC, and 10Ake/CPC is of great promising prospect in bone repair.     

土木工程施工课程线上平台教学实践

土木工程施工课程作为土木工程及工程管理专业的学科基础课和核心专业课程,在疫情防控期间"停课不停教""停课不停学"的要求下,通过线上平台进行授课。由于土木工程施工课程内容庞杂、综合性强、实践性强,且章节之间关联性较弱,探究既能使学生快速适应,又能保证教学质量的在线教学方法至关重要。以华南某高校土木工程施工课程为例,基于中国大学MOOC、建筑云课、腾讯课堂、QQ群等线上平台讲授教学内容,并运用问卷调查对课程线上教学效果进行评价。结果表明,线上教学为学生提供了丰富灵活的学习方式,显著提高了学生的自主学习能力,扩大了学生的知识面,达到了较好的学习效果。     

Effects of sintering temperature and Bi2O3, Y2O3 and MgO co-doping on the dielectric properties of X8R BaTiO3-based ceramics

Bi₂O₃, Y₂O₃ and MgO co-doped BaTiO₃ (BT)-based X8R ceramics were synthesized successfully for the first time. The effects of the sintering temperature and Bi₂O₃, Y₂O₃ and MgO dopants on the dielectric properties were investigated systematically. Bi₂O₃ doping can increase the Curie temperature (T_c), but reduces the overall dielectric permittivity. On the other hand, Y₂O₃ doping is beneficial to the formation of core-shell microstructure and the increase of T_c, whereas MgO can prevent excessive Y₂O₃ from diffusing into grain core, and thereby further contributes to the generation of the core–shell microstructure. The generation of the typical core-shell microstructure was confirmed and investigated in detail by using transmission electron microscopy (TEM). It is argued that the synergistic effects of Bi₂O₃, Y₂O₃ and MgO co-doping in terms of the formation of the core-shell structure and the increase of T_c, can help improve the temperature stability of the dielectric permittivity effectively. Increasing the sintering temperature leads to an increase in the grain size, which in turn leads to an increase in the overall dielectric permittivity due to the grain size effect.     

Physicochemical Properties of Bis-GMA/TEGDMA Dental Resin Reinforced with Silanized Multi-Walled Carbon Nanotubes

Silicon - The multi-walled carbon nanotubes (CNTs) modified by different amount of silane coupling agents named 3-(methacryloxy)propyltrimethoxysilane (γ-MPS), were incorporated into dental...     

基质囊泡及其在骨矿化过程中的作用

基质囊泡(Matrix vesicles,MVs)是骨矿物初始形核生长的场所。骨矿化过程中,钙、磷酸根等离子经通道蛋白跨膜运输进入MVs内,当局部浓度达到一定值时,磷酸钙晶体开始沉积。磷酸钙的存在形态包括无定形磷酸钙、磷酸八钙及羟基磷灰石等。MVs可以调节细胞内外基质中的钙和磷酸根离子的稳态及无机磷酸盐/无机焦磷酸盐的比值,提供磷酸钙晶体成核位点,在骨矿化的初始启动过程中发挥重要作用。本文概述了MVs的生物来源、分子组分、提取方法,MVs介导的骨矿化过程,以及近年来利用囊泡作为体外矿化模型模拟MVs矿化过程的研究进展。     

大豆多肽的分离纯化及其体外降血脂功能研究

通过HepG2肝癌细胞构建高胆固醇细胞模型，以大豆蛋白为对照组，分析了大豆多肽的体外降血脂活性，并通过凝胶过滤层析法和纳米技术-高效液相色谱-串联质谱（Nano-HPLC-MS/MS）技术对大豆多肽进行了初步纯化和鉴定。结果表明，大豆多肽对HepG2细胞内甘油三酯（TG）、总胆固醇（TC）和低密度脂蛋白胆固醇（LDL-C）的产生具有一定的抑制作用，对HepG2细胞内高密度脂蛋白胆固醇（HDL-C）的产生和超氧化物歧化酶（SOD）活力具有促进作用，且大豆多肽对HepG2细胞内TG、LDL-C的抑制作用及对HDL-C和SOD活力的促进作用均强于对照组，具有良好的体外降血脂活性。大豆多肽经分离纯化，最终鉴定并筛选出5个多肽，分别编号为LLDTN、FLEHAF、DFGKFF、LVGLKLY和LIDSVLDVVRK，相应的分子质量分别为574.30 Da、762.37 Da、759.36 Da、804.51 Da和1 255.75 Da。     

二维层状Ni/β-Ni(OH)2纳米复合材料的制备及其摩擦学性能研究

采用水热反应制备出β-Ni(OH)2,然后通过水热还原得到Ni/β-Ni(OH)2纳米复合粉体材料,采用X射线衍射仪(XRD)和扫描电子显微镜(SEM)对复合材料的相结构、成分及形貌进行表征分析。采用四球摩擦磨损试验机评价制备的Ni/β-Ni(OH)2作为润滑油添加剂的摩擦学性能,基础油为PAO6。摩擦试验后,采用SEM分析典型试验钢球磨斑的表面形貌,利用能谱仪(EDS)研究磨斑表面化学元素的组成,探讨Ni/β-Ni(OH)2纳米复合润滑添加剂的减摩抗磨机制。结果表明:Ni/β-Ni(OH)2纳米复合材料作为润滑添加剂具有极好的减摩抗磨性能,显著优于基础油PAO6和未负载纳米Ni的二维β-Ni(OH)2层状材料;与基础油相比,添加0.1%质量分数Ni/β-Ni(OH)2添加剂的油样的摩擦因数和磨斑直径分别降低了17.6%和41.5%;Ni/β-Ni(OH)2纳米复合粉体综合了纳米Ni及层状β-Ni(OH)2两部分结构特性,在摩擦过程中,复合材料中的纳米金属粒子Ni与层状结构材料β-Ni(OH)2能够相互增强起到协同润滑作用。