Stress field and damage evolution in C/SiC woven composites: Image-based finite element analysis and in situ X-ray computed tomography tests

The construction and examination of meso-structural finite element models of a Chemical-Vapor-Infiltrated (CVI) C/SiC composite is carried out based on X-ray microtomography digital images (IB-FEM). The accurate meso-structural features of the C/SiC composites, which are consisted of carbon fiber tows and CVI-SiC matrix, in particular the cavity defects, are reconstructed. With the IB-FEM, the damage evolution and fracture behaviors of the C/SiC composite are investigated. At the same time, an in situ tensile test is applied to the C/SiC composite under a CT real-time quantitative imaging system, aiming to investigate the damage and failure features of the material as well as to verify the IB-FEM. The IB-FEM results indicate that material damage initially occur at the defects, followed by propagating toward the fiber-tow/SiC-matrix interfaces, ultimately, combined into macro-cracks, which is in good agreement with the in situ CT experiment results.     

多模态影像学检查在诊断早期强直性脊柱炎骶髂关节疾病中的效果

目的:探究在早期强直性脊柱炎骶髂关节疾病诊断中不同放射影像学检查方法的应用效果。方法:抽取2018年5月-2020年1月本院收治的早期强直性脊柱炎骶髂关节疾病患者65例作为研究对象,所有患者均开展X线、CT、MRI影像学检查,对比三种不同影像学检查方法的检出率、影像学特征。结果:X线、CT、MRI检出率分别为38.46%(25/65)、60.00%(39/65)、76.92%(50/65),检出率相比,MRI、CT明显高于X线,P<0.05;X线、CT、MRI影像学特征,发现关节间隙出现不同的异常,如关节面出现侵蚀、骨质囊变现象,关节面下骨质出现硬化与关节软骨出现肿胀,其中MRI、CT检查,阳性率高于X线,P<0.05。而对于软组织肿胀、骨髓水肿、滑膜炎症、关节滑膜增厚等现象,只能通过MRI检查才能诊断。结论:在早期强直性脊柱炎骶髂关节疾病诊断中,X线、CT、MRI影像学检查均具有一定的指导意义,而MRI不仅可以提高检出率,还能准确反映微小病灶及其软组织病变,对于早期发现骶髂关节炎值得推荐。     

成型温度对PBX装药内部质量及性能的影响

针对压制成型的PBX炸药装药，选择CT无损检测、巴西实验和扫描电镜检测等技术，对比研究了室温和加热两种温度下压制成型的炸药装药内部质量、静态力学性能和细观破坏形式。结果表明，加热压制有利于改善炸药装药的内部质量，可避免产生初始损伤，且提高了装药的力学性能。细观尺度上，室温压制成型的装药主要发生界面脱黏破坏，加热压制成型装药的主要破坏形式是穿晶断裂。     

CT/MR-compatible physical human-robotized needle interactions: From modeling to percutaneous steering

In recent years a number of robotic steering systems have been proposed that are geared towards improving interventional radiology procedures such as tumor ablation and biopsy. These solutions have introduced new safety challenges in the physical human–robot interaction domain. This study presents a new 3D robotized needle steering algorithm compatible with CT and MR-imaging guidance. The steering algorithm is featured with an adaptive self-correction mechanism that works as a failure contingency tool that could be adapted online at each insertion step. The developed pHRI solution was designed to be compatible to ferro-magnetic issues and a reduced workspace inside the scanner bore. As far as we know, this is the first approach designed to steer rigid needles free of force sensors and which meets the challenges that prevail in our context. Our proposed approach helps overcome safety issues regarding the physical interaction between robotized needles and patients. Validation testing highlighted the feasibility of the new needle steering algorithm, while its accuracy revealed the potential of the approach under the proposed scope of application.     

Application of Cr3C2/C composite powders synthesized via molten-salt method in low-carbon MgO–C refractories

High-performance and low-carbon MgO–C refractories are important refractories for smelting ultra-low carbon steel and clean steel. Based on this, Cr₃C₂/C composite powders were synthesized by the molten-salt method, and used as an additive to prepare low-carbon MgO–C refractories under nitrogen atmosphere. The phase, morphology and oxidation kinetics of Cr₃C₂/C composite powders were studied. In addition, the effect of Cr₃C₂/C composite powders on the morphology, mechanical properties, thermal shock resistance, and corrosion resistance of MgO–C refractories was investigated. The results indicated that the Cr₃C₂/C composite powders exhibited superior oxidation resistance than flake graphite. Moreover, the Cr₃C₂/C composite powders were introduced into the MgO–C refractories. Compared with the sample without Cr₃C₂/C composite powders, the introduction of 1 wt% Cr₃C₂/C composite powders significantly improved the thermomechanical properties and corrosion resistance of the material, its CMOR, CCS before and CCS after thermal shock were 9.06 MPa, 50.40 MPa and 32.60 MPa, respectively, and the corrosion index was significantly reduced from 44.6% to 26.5%.     

基于小波变换的分数阶微分算法在肝脏肿瘤CT图像纹理增强中的应用

图像纹理增强过程中容易丢失平滑区域纹理细节，而分数阶微分增强虽然能够非线性保留平滑区域纹理细节，但对频率分辨率敏感。针对这个问题，提出一种基于小波变换的分数阶微分纹理增强算法，应用于平扫计算机断层扫描（CT）图像的肝脏肿瘤区域的纹理增强。首先，通过小波变换将图像感兴趣区分解成多个子带分量；其次，基于分数阶微分定义构造一个带补偿参数的分数阶微分掩膜；最后，使用该掩膜与每个高频子带分量进行卷积并利用小波逆变换重组图像感兴趣区。实验结果表明，该方法在使用较大分数阶次显著增强肿瘤区域的高频轮廓信息的同时，有效地保留了低频平滑的纹理细节：增强后的肝细胞癌区域与原区域相比，信息熵平均增加36.56%，平均梯度平均增加321.56%，平均绝对差值平均为9.287；增强后的肝血管瘤区域与原区域相比，信息熵平均增加48.77%，平均梯度平均增加511.26%，平均绝对差值平均为14.097。     

Filter-based energy-resolved X-ray computed tomography with a clinical imager

Filter-based energy-resolved X-ray computed tomography (CT) is an approach for implementing energy-resolved CT imaging using a flat-panel-detector-based cone-beam system. In this study, we performed experiments with a 20-cm-diameter phantom on a clinical X-ray imager. The material density results showed good agreement with the ideal values. We also propose an improved method for obtaining the detector response function and the X-ray spectrum, which requires fewer measurements and will be practical for future clinical use. Issues such as scatter and image noise remain to be addressed.     

两种3D打印用雾化Ti-6Al-4V粉末的对比研究

本研究分别利用水冷铜坩埚真空感应熔炼气雾化(VIGA-CC)和等离子旋转电极(PREP)两种技术制备出球形Ti-6Al-4V合金粉末,作者利用SEM、同步辐射CT扫描-三维重建和氩气含量测试等分析手段对不同粒径的Ti-6Al-4V合金粉末的孔洞缺陷和氩气含量、硬度值进行了表征。实验结果表明, VIGA-CC粉末粒度分布宽,细粉收得率较多,粉末粒度分布在40~180 μm之间, PREP粉末的粒度分布较窄,主要集中在110~180 μm之间；金属粉末内部的孔隙率、气体含量和孔尺寸随着粉末粒度的增大而增大,且同一粒径范围内VIGA-CC粉末的气孔概率多于PREP粉末；随着粉末粒径减小,粉末截面组织逐渐细化,其硬度值逐渐升高,整体上VIGA-CC粉末硬度值高于PREP粉末。     

制浆造纸企业配电变压器的选择和节能探讨

本文计算并分析了变压器运行的损耗，从配电变压器的选型、负荷率的选择等方面探讨了其节能降耗措施；并对制浆造纸企业配电变压器选用方法提出了建议。     

MSCT多期增强扫描在肾脏透明细胞癌中的诊断价值

目的探讨多排螺旋CT(MSCT)多期增强扫描在肾脏透明细胞癌诊断中的规律性,提高对该肿瘤诊断水平。方法回顾性分析2016年1月~2018年6月14例均经手术切除病理证实为肾脏透明细胞癌患者的CT影像资料,所有病例均行MSCT平扫及多期动态增强扫描。结果14例肾脏透明细胞癌形态大多数呈圆形或者类圆形,瘤体最大径范围1.7cm^11.3cm,平均(4.8±1.4)cm,13例CT平扫时肿瘤密度不均匀,呈等低密度,1例呈等密度;12例出现坏死囊变,钙化1例,伴肾盂、肾盏侵犯2例;动态增强扫描可见12例包膜完整,1例均匀性强化,13例不均匀性强化;引入对比剂后皮质期,出现10例病灶强化幅度大于肾皮质,而仅4例低于肾皮质,三期平均CT值分别为110±30Hu,90±15Hu及75±14Hu,其中在实质期出现13例肿瘤强化幅度小于肾实质,仅1例大于肾实质。结论引入对比剂动态增强扫描后,肾脏透明细胞癌在皮质期明显不均匀强化,实质期强化幅度下降显著,呈现出典型的“快进快出”血流动力学强化方式,且肿瘤容易出现坏死、囊变为其特点。