两种混合单元混合机理的数值模拟

为了研究SV型和SX型混合单元在全静态乳化器的混合机理,使用群体平衡模型对乳化器内部流场进行模拟分析。结果表明,SV型与SX型混合单元的混合机理是油相与水相材料通过混合单元时其空间流动方向改变,在流场内形成大量的漩涡,从而达到乳化的目的;通过比较流体在经过SV型和SX型混合单元后的水相索特平均直径(d_(32)),得出SV型混合单元的乳化效果更强,但同时消耗更多的能量,压降更大。     

瞬变电磁井间勘探的全空间几何因子

井间是剩余油的主要分布区域,为探测井间剩余油,提高采收率,提出了基于全空间几何因子的瞬变电磁井间勘探方法。在本井使用线圈发射、邻井使用线圈接收,根据瞬变电磁场理论,在阶跃信号的激励下发射线圈在地层中激发出沿圆周方向的闭合瞬变电场,该电场在导电地层中产生与地层电导率呈正比的涡流。由Doll地层环模型可知,地层中的涡流在空间任意点激发得到与地层电导率成正比的二次场响应信号(有用信号),并可表示为空间各点电导率的加权平均值,其权重即为井间瞬变电磁勘探的全空间几何因子;全空间几何因子集中分布在发射线圈和接收线圈附近,其它区域分布较少,在发射线圈和接收线圈两侧呈现不同的极性;对瞬变电磁响应与地层电导率、井间距和源距的变化规律研究可知,瞬变电磁井间勘探有用信号随着地层电导率的增大而增大,随着井间距的增加单调减小,在发射线圈和接收线圈处于同一深度时该响应信号幅度最大。     

结合边缘特征先验引导的深度卷积显著性检测

针对当前基于深度学习的显著性检测算法缺少利用先验特征和边缘信息，且在复杂场景中难以检测出鲁棒性强的显著性区域的问题，提出了一种结合边缘特征，利用先验信息引导的全卷积神经网络显著性检测算法。该算法利用三种被经常用到的先验知识结合边缘信息形成先验图，通过注意力机制将提取的先验特征与深度特征有效融合，最终通过提出的循环卷积反馈优化策略迭代地学习改进显著性区域，从而产生更可靠的最终显著图预测。经过实验定性定量分析，对比证明了算法的可靠性。     

Performance analysis of large-scale MIMO system for wireless backhaul network

In this paper, we present a performance analysis of large-scale multi-input multi-output (MIMO) systems for wireless backhaul networks. We focus on fully connected N nodes in a wireless meshed and multi-hop network topology. We also consider a large number of antennas at both the receiver and transmitter. We investigate the transmission schemes to support fully connected N nodes for half-duplex and full-duplex transmission, analyze the achievable ergodic sum rate among N nodes, and propose a closed-form expression of the achievable ergodic sum rate for each scheme. Furthermore, we present numerical evaluation results and compare the resuts with closed-form expressions.     

多分量数据全波形反演在气藏检测中的关键问题——以苏里格气田为例

苏里格气田是中国典型的致密砂岩气藏，构造简单、平缓，横向非均质性强，有效储层与围岩声学特征差别小，地震响应不明显，常规地震监测方法预测难度大，但气田含气砂岩泊松比低，是地震气藏检测的有效参数。利用弹性全波形反演精度高和能处理复杂非均质介质的优势，反演地层拉梅常数、剪切模量和密度，并计算泊松比，从而进行气藏预测。重点阐述了苏里格气田多分量数据全波形反演初始模型建模、先验模型建模和地震数据预处理3个关键问题的处理方法。二维三分量数据反演和"甜点"预测结果表明：①对于具有强非均质性的苏里格气田，利用全波形反演获得精度较高的地层弹性参数能显著提高气藏预测的准确度；②苏里格地区构造简单、平缓，利用常规叠加速度并结合构造解释可以建立比较好的初始模型，从而有效地解决了周波跳跃和局部极小的难题；③先验知识的约束和地震数据的预处理是全波形反演成功应用于苏里格气田气藏检测的关键。     

Nonlinear performance evaluation model for throughput of AQM scheme using full factorial design approach

The performance of active queue management (AQM) is measured in terms of throughput, delay, queue size, and loss rate. We have carried out the optimized performance measure of throughput for AQM scheme random early detection (RED) using full factorial design (FDD) technique that is a new approach of performance analysis particularly for congestion control algorithms. We have considered the input factors, viz, buffer size, maximum threshold, and the number of file transfer protocol (FTP) sources for the evaluation of RED that can be used for other AQM schemes, viz, adaptive RED, three‐section RED (TRED), and adaptive queue management with random dropping (AQMRD). The effect of each input factor as well as their interactions are evaluated using factorial design technique that results to obtain the nonlinear equation for performance measure in terms of input factors buffer size, maximum threshold, and the number of FTP sources. Finally, we show the contour plots for variation of performance measure throughput (steady state) from minimum to maximum values with respect to the different setting of input parameters.     

杨泗港快速通道武昌青菱段芦湾湖立交的选型研究

杨泗港快速通道青菱段是杨泗港过江通道江南岸重要的快速疏解道路,既承担快速通过性交通,又承担地方性服务功能。芦湾湖立交为青菱段与城市放射线珞狮南路的重要交通转换枢纽,在节点流量分析基础上,从功能定位方面进行阐述。芦湾湖立交由部分互通立交提升为全互通立交,并根据立交用地等限制因素进行全互通的方案比选,满足现状并适合整体需求和建设标准的立交方案,达到保证交通安全,适应城市发展和交通需求的目的。     

Adaptive finite-time tracking control for parameterized nonlinear systems with full state constraints

In this article, the issue of adaptive finite-time dynamic surface control (DSC) is discussed for a class of parameterized nonlinear systems with full state constraints. Using the property of logarithmic function, a one-to-one nonlinear mapping is constructed to transform a constrained system into an unconstrained system with the same structure. The nonlinear filter is constructed to replace the first-order linear filter in the traditional DSC, and the demand on the filter time constant is reduced. Based on finite-time stable theory and using modified DSC, the finite-time controller is designed via DSC. Theoretical analysis shows that all the signals in the closed-loop system are semiglobal practical finite-time stable. Furthermore, none of the states are outside the defined open set. In the end, simulation results are presented to demonstrate the effectiveness of the proposed control schemes with both linear filters and nonlinear filters.     

复杂膨胀性围岩条件下交岔点支护技术研究

针对复杂膨胀性围岩条件下交岔点高应力集中区围岩稳定性控制和支护技术难题，通过对交岔点围岩变形表现形式、交岔点围岩变形机理的研究分析，提出了交岔点支护难点及重点。基于围岩控制理论分析，提出了“有限让压的柔性支护+全断面封闭抗压的刚性支护技术”，前期柔性支护采用“高强、高预应力锚杆+锚索+喷浆”联合支护有限度控制围岩变形，允许围岩在可控范围内释放围岩应力|后期通过架设异形支架与支撑架组成的联合支护体并喷射混凝土对交岔点围岩进行全断面封闭抗压支护，有效控制巷道交岔点围岩的变形。确保了交岔点围岩变形的整体可控性、稳定性，达到了预期支护效果。     

超级计算机网络引导技术研究与分析

针对超级计算机系统中网络引导时间开销大的问题，提出网络引导分布算法是影响网络引导性能的主要因素之一，是优化网络引导性能的主要方向的观点。首先，分析了影响大规模网络引导性能的主要因素；其次，结合一种典型超级计算机系统，分析了超节点循环分布算法（SCDA）和插件循环分布算法（BCDA）的网络引导数据流拓扑结构；最后，量化分析了这两种算法对各个网络路径段的压力和可获得的网络性能，发现BCDA性能是SCDA性能的1~20倍。通过理论分析和模型推导发现，在计算节点和引导服务器之间使用更细粒度的映射算法可以在引导部分资源时使用尽量多的引导服务器，减少对局部网络资源的过早竞争，提升网络引导性能。