Finite element limit analysis of load-bearing performance of reinforced slopes using a non-associated flow rule

This paper presents a numerical study on the load-bearing performance of reinforced slopes under footing load using a finite element limit analysis (FELA) method where a non-associated flow rule is assumed in the analysis. The method was validated against results from full-scale model tests and a limit equilibrium (LE) analytical method. A series of parametric analyses was subsequently carried out to examine the influences that the soil dilation angle, footing location, and reinforcement design (i.e. length, tensile strength, and vertical spacing) could have on the load-bearing performance of reinforced slopes. Results indicate that dilation angle has a significant influence on the predicted magnitudes of bearing capacity, slope deformation, and mobilized reinforcement load. The predicted values of bearing capacity using the FELA are smaller than those from the Meyerhof's analytical method for unreinforced semi-infinite foundation, especially for larger friction angle values. Additionally, the ultimate bearing capacity of the slope and its corresponding horizontal deformation increase with the reinforcement tensile strength. Finally, the slip planes under the applied footing load are found to be y-shaped and primarily occur in the upper half of the slope.     

新型树启发式搜索算法的机器人路径规划

面对三维空间移动机器人从起始点到终止点的最短路径问题,提出一种新型的边缘点树启发式搜索(TreeEP)算法,该方法将地图空间进行密度可调的三维离散化处理,根据障碍安全距离筛选出障碍物的可靠边缘点信息,再利用树扩散架构选出最能引导搜索方向的潜力点进行扩散搜索,最终得出最短路径。提出局部调整策略,得到改进的Tree-EP算法。实验结果表明,在带障碍复杂地形最短路径搜索应用中,提出的Tree-EP算法与已有方法相比,能找到更短的移动路径。     

基于改进的Random Subspace的客户投诉分类方法

电信业的客户投诉不断增多而又亟待高效处理。针对电信客户投诉数据的特点，提出了一种面向高维数据的改进的集成学习分类方法。该方法综合考虑客户投诉中的文本信息及客户通讯状态信息，基于Random Subspace方法，以支持向量机（Support Vector Machine，SVM）为基分类器，采用证据推理（Evidential Reasoning，ER）规则为一种新的集成策略，构造分类模型对电信客户投诉进行分类。所提模型和方法在某电信公司客户投诉数据上进行了验证，实验结果显示该方法能够显著提高客户投诉分类的准确率和投诉处理效率。     

基于伪布尔模型和启发式算法求解无容量设施选址问题

采用伪布尔模型和启发式算法来求解无容量设施选址问题。首先给出了问题的伪布尔(pseudo-Boolean)表示，然后基于Khumawala规则对问题进行预处理，最后提出两种启发式分支准则来求解问题。实验结果表明所提算法简单有效。     

形式美法则在针织面料设计中的运用

基于形式美对比法则、均衡法则、韵律法则的内涵及其在针织面料设计中的应用规律,从深浅、虚实、肌理、曲直、高低等视角选取典型案例对针织面料进行分析,得出针织面料在形式上具有的独特意趣与艺术价值,并探讨其形式美及审美意义。通过分析针织技术与形式美法则之间的关联,探寻针织面料中形式美法则的作用及其基本规律与原理,以此指导针织面料的设计,为现代设计师灵活运用形式美法则进行艺术创作提供一定的参考。     

基于改进蚁群算法的三维路径规划

针对移动机器人在海水环境中的三维路径规划问题容易陷入局部最优和收敛慢等瑕疵，根据三维环境全局信息来改进蚁群算法以提高实时性和收敛速度。改进蚁群算法的启发函数，采用局部信息和全局信息结合动态地改进信息素更新方式，以及根据三维空间中路径的平坦程度和光滑度二阶微分分别增加了一阶微分和二阶微分来再次修改信息素更新规则。仿真对比实验结果显示改进后的蚁群算法克服了收敛速度慢、容易陷入局部最优的缺点。     

基于数据挖掘的开源电子资源访问行为统计模型

为了解决当前图书馆资源个性化推荐过程中存在推荐的准确率、召回率以及效率较低的问题,采用二维距离模型构建用户社区模型,用于描述访问用户与图书馆开源电子资源之间的关系,并对互联网用户需求和访问行为进行模糊规则推理.依据互联网用户属性和图书馆资源访问需求属性之间的模糊规则,建立图书馆开源电子资源访问行为统计模型,并利用该模型向用户提供个性化推荐服务.仿真结果表明,所建模型的推荐召回率高达98. 4%,推荐准确率为99. 2%,运行时间小于0. 04 s.所建模型能够为互联网用户提供准确、高效地图书馆资源个性化推荐服务.     

Transverse magnetoresistance peculiarities of thermoelectric Lu-doped Bi2Te3 compound due to strong electrical disorder

The n-type thermoelectric Bi_1.9Lu_0.1Te₃ was prepared by microwave-solvothermal method and spark plasma sintering. The magnetic field and temperature dependences of transverse magnetoresistance measured within temperature 2–200 K interval allow finding the peculiarities characteristic for strongly disordered and inhomogeneous semiconductors. The first peculiarity is due to appearance of linear-in-magnetic field contribution to the total magnetoresistance reflected in a crossover from quadratic magnetoresistance at low magnetic fields to linear magnetoresistance at high magnetic fields. The linear magnetoresistance can result from the Hall resistance picked up from macroscopically distorted current paths due to local variations in stoichiometry of the compound studied. The second peculiarity is that both linear magnetoresistance magnitude and crossover field are functions of carrier mobility which is in agreement with the Parish and Littlewood model developed for disordered and inhomogeneous semiconductors. An increase in the mobility due to a decrease in temperature is accompanied by an increase in the magnetoresistance magnitude and a decrease in the crossover field. Finally, the third peculiarity is related to the remarkable deviation of the total magnetoresistance measured at various temperatures from the Kohler's rule. Presence of strong inhomogeneity and disorder in the Bi_1.9Lu_0.1Te₃ structure concluded from the magnetoresistance peculiarities can be responsible for the remarkable reduction in the total thermal conductivity of this compound.     

基于变量决策层的启发式变量选择策略

启发式分支策略是SAT求解器中不可或缺的一部分，直接影响求解器的效率。早期的启发式分支决策需要遍历整个子句数据库，效率比较低。随着独立变量状态衰减和（Variable State Independent Decaying Sum, VSIDS）分支策略的出现，SAT求解器的效率有所提高，但VSIDS策略以及它的延伸策略中变量的增量都只是与变量的冲突次数有关，没有考虑变量的决策层在分支策略中的影响。因此当发生冲突时，如果与冲突有关的变量的得分相同而决策层不同时，对于变量的选择就具有随机性。基于此，本文在阐述变量的决策层的重要性之后在VSIDS策略的基础上，提出一种基于变量决策层的启发式变量选择策略--HSVDL策略。然后通过实例显示HSVDL策略在变量决策阶段选择决策层低的变量的可能性比选择决策层高的变量的可能性要大，而且得分比较小，减少了内存的占用。最后通过实验表明HSVDL策略能够求解出更多的实例，求解器的效率也有所提高，说明该策略有一定的优势。     

Digital twin-based assembly data management and process traceability for complex products

Complex products such as satellites, missiles, and aircraft typically have demanding requirements for dynamic data management and process traceability. The assembly process for these complex products involves high complexity, strong dynamics, many uncertainties, and frequent rework and repair, especially in the model development stage. Achieving assembly data management and process traceability for complex products has always been a challenge. A recently proposed solution involves one-to-one mapping of the corresponding physical entity, also known as the digital twin method. This paper proposes a digital twin-based assembly data management and process traceability approach for complex products. First, the dynamic evolutionary process of complex product assembly data was analyzed from three dimensions: granularity, period and version. Then, a framework of digital twin-based assembly data management and process traceability for complex products was constructed. Some core techniques are: 1) workflow-based product assembly data organization and version management; 2) synchronous modeling of the product assembly process based on digital twin; and 3) hierarchical management and traceability of product assembly data based on digital twin. On this basis, an algorithm flowchart for generating a product assembly data package was created, which includes product assembly data management, assembly process traceability, and generation of a product assembly data package. Furthermore, the Digital Twin-based Assembly Process Management and Control System (DT-APMCS) was designed to verify the efficiency of the proposed approach. Some aerospace-related assembly enterprises are currently using DT-APMCS and achieving satisfactory results. Finally, a summary of our work is given, and the future research work is also discussed.