基于双时间点检测的毫米波雷达人流量监测方法

针对现有基于视频监控的人流量统计方案成本高、算法复杂且不利于个人隐私保护的局限性，利用毫米波雷达体积小、成本低、分辨率高的特点，提出了一种基于双时间点检测的人流量监测方法。该方法先获取人体目标散射点位置和多普勒频移信息来构成点云数据，然后根据多普勒频移正负来判断人体的运动方向，并筛选具有高多普勒频移值的点云数据以降低干扰点对聚类结果的影响；在双时间点对特定区域内人员数量进行统计，并根据双时间点之间所获取的点云数据聚类结果对所统计人员数据进行修正。实验结果表明，该方法能够用匿名的方式以较高的正确率统计人员进出。     

High-performance Pb(Ni1/3Nb2/3)O3-PbZrO3-PbTiO3 ceramics with the triple point composition

Ternary 0.552Pb(Ni_1/3Nb_2/3)O₃-xPbZrO₃-(0.448-x)PbTiO₃ (PNN-PZ-PT) ceramics near the triple point compositions were fabricated by an improved two-step sintering method. The triple point composition 0.552PNN-0.135PZ-0.313PT ceramic has outstanding piezoelectric performance with piezoelectric coefficient d₃₃ = 1200 pC/N. Its easy fabrication and low cost make this piezoelectric material an excellent candidate for high sensitivity sensors and ultrasonic transducers. The evolution of domain structures for ceramics with composition near the triple point provides deeper insight into the mechanism of ultrahigh piezoelectric properties of PNN-PZ-PT ceramics.     

基于LP与小波包的复杂机电系统监测序列混沌降噪方法

针对流程工业生产系统监测数据存在强噪声和混沌性的特点,提出了一种局部投影方法(Local Projection Method)与小波包方法相结合的信号降噪方法。该方法先利用局部投影方法从动力学系统嵌入流形的角度进行多次迭代降噪,并根据关联维数来判定迭代终止;再利用小波包方法从频率的角度进行降噪,抑制高频噪声的干扰,取得了较好的降噪效果。用Lorenz时间序列进行仿真验证,对仿真时间序列加入不同程度的噪声,对比分析小波包、局部投影与该方法降噪后的相空间、SNR值和最大Lyapunov指数,证明了该方法对于中高强度噪声具有更好的降噪效果。并将该方法用于某压缩机组的实际监测数据降噪,评估三种方法的降噪效果,进一步验证了该方法的优越性。     

薄膜铂电阻元件稳定性测试与分析

高端军事应用环境对测温传感器提出了小结构、高精度、良好的长期稳定性等要求,采用溅射方式制备的薄膜铂电阻元件成为了首选。通过分析薄膜铂电阻元件的结构、工艺,探讨影响稳定性的主要因素,包括薄膜缺陷、杂质、电迁移、结构封装应用与温度应力等。选择薄膜铂电阻在水三相点下的电阻值作为稳定性的比较基准,设计了一款不大于3mK的高精度测试系统。通过对薄膜铂电阻元件进行高温电寿命试验和温度冲击试验,评估得出薄膜铂电阻元件长期稳定性达到10mK,满足设计需求。     

基于边缘和局部熵融合的视觉安全性评估方法

针对基于局部熵进行加密图像视觉安全性评估存在块效应的局限性，引入图像的边缘特征，通过共有边缘来衡量加密图像与原始图像的边缘相似度，消除了块效应。由于局部熵对加密等级低的图像不敏感，边缘相似度对加密等级高的图像不敏感，将两个评估方法进行自适应融合，提出[SLEES]（Local Entropy and Edge Similarity，[SLEES]）指标。通过改变图像像素位置和图像像素值的加密方式处理图像和视频帧进行测试，实验结果表明，[SLEES]指标相比传统评估指标有更好的鲁棒性，评估范围更广。     

Reduced basis method for managed pressure drilling based on a model with local nonlinearities

To circumvent restrictions of conventional drilling methods, such as slow control actions and inability to drill depleted reservoirs, a drilling method called managed pressure drilling (MPD) has been developed. In MPD, single-phase flow processes can be modeled as a feedback interconnection of a high-order linear system and a low-order nonlinear system. These nonlinearities appear locally both inside and at the boundaries of the computational domain. To obtain a fast simulation platform for real-time purposes (eg, online model-based controller implementation), model order reduction is required for MPD. However, the local nonlinearities render applying model order reduction techniques challenging. In this study, a new approach is proposed to deal with such nonlinearities within the reduced basis (RB) context and it is successfully tested on a model for MPD. Contrary to the classical RB technique, the proposed approach not only does not generate nonphysical spikes at the locations of these local nonlinearities but also yields high speedup factors. The obtained reduced-order model can be used for efficient online simulation and controller design for drilling systems with MPD.     

闭口闪点测定方法的对比分析

对我国常用的闭口闪点测定方法宾斯基-马丁闭口杯法、阿贝尔闭口杯法和泰格闭口杯法的测定原理进行对比分析，并采用这3种方法分别对2种有证标准样品、4种有机试剂样品和7种喷气燃料样品的闭口闪点进行测定。结果表明：这3种方法在适用范围、仪器结构、升温速率和点火操作要求等方面都有一定差异，导致采用这3种方法测定同一样品的闭口闪点结果略有差异，闪点测定结果之间的最大差值与样品闪点的高低呈正相关；与阿贝尔闭口杯法相比，宾斯基-马丁闭口杯法测得的闪点结果较高，对于3号喷气燃料，二者之差为0～1.0 ℃，阿贝尔闭口杯法更适合3号喷气燃料闭口闪点的测定；对于纯有机试剂样品，阿贝尔闭口杯法和宾斯基-马丁闭口杯法测得的闪点结果呈现较好的线性关系。     

Structural optimization with an automatic mode identification method for tracking the local vibration mode

Traditional optimization methods, which take a specific order of modal frequency as the design constraint, could fail to obtain the desired solution because of modal substitution. An improved optimization model with continuous sizing variables is established to solve this problem, in which the minimum weight and a given local modal frequency are considered as the objective and the constraint. To capture accurately the expected mode of vibration, a local mode identification technique is proposed based on the strain energy ratio between the local area and the whole structure. With that scheme, an optimization system is developed, in which the local mode can be effectively identified and the constraint can be updated with it in the iteration process. Two numerical examples, of a reinforced plate and a satellite structure, are applied to illustrate the effectiveness and efficacy of the proposed method.     

Hybrid self-inertia weight adaptive particle swarm optimisation with local search using C4.5 decision tree classifier for feature selection problems

ABSTRACT

Feature selection is an important task to improve the classifier’s accuracy and to decrease the problem size. A number of methodologies have been presented for feature selection problems using metaheuristic algorithms. In this paper, an improved self-adaptive inertia weight particle swarm optimisation with local search and combined with C4.5 classifiers for feature selection algorithm is proposed. In this proposed algorithm, the gradient base local search with its capacity of helping to explore the feature space and an improved self-adaptive inertia weight particle swarm optimisation with its ability to converge a best global solution in the search space. Experimental results have verified that the SIW-APSO-LS performed well compared with other state of art feature selection techniques on a suit of 16 standard data sets.     

煤矿局部通风机风筒保护装置设计应用

为了提高掘进巷道通风稳定性,降低局部通风机风筒损坏率及漏风系数,提高风筒使用寿命,潞安集团司马煤业公司通风队通过技术分析设计了一套风筒保护装置,该装置提高了风筒使用寿命,降低了风筒漏风量,避免了掘进巷道风量不足现象,取得了显著应用成效。