基于改进耦合增强随机共振的滚动轴承故障诊断

针对强背景噪声下经典随机共振方法对滚动轴承故障特征提取效果差的问题,提出了一种基于改进耦合增强随机共振的滚动轴承故障诊断方法。首先,利用一个定参双稳系统和一个变参双稳系统构成耦合随机共振系统,外部输入直接作用于定参双稳系统;然后,通过调节变参双稳系统参数和耦合系数实现耦合系统的随机共振控制,并借助遗传算法实现控制参数的自适应选取。实验和工程应用验证了所提方法的有效性和优越性。     

磁感应强度基准技术评述

从不确定度和应用情况等方面介绍了当前磁感应强度量值单位的几类基准,包括基于计算线圈的实物基准、基于核磁共振原理的量子基准和基于质子旋磁比的基本物理常数基准。量子精密测量领域近年来发展迅速,出现了比传统核磁共振基准的准确度更高的原子磁共振量子基准、可以进一步拓展核磁共振基准的量值下限的超导-核磁共振技术等新进展。重点评述了现有的磁感应强度的量子基准,并介绍了一些有望进一步拓展磁学计量前沿的新进展。     

基于多视图立体视觉的沙堆三维尺寸测量研究

利用从运动中恢复结构方法(SFM),提出了一种基于多视图立体视觉的沙堆三维重建及三维尺寸测量方法。首先根据SFM方法的求解不稳定特点,结合光束平差法对SFM求解过程进行分析及优化;其次针对SFM重建结果为稀疏点云的问题,利用基于面片的稠密重建算法重新生成稠密的三维点云,再利用泊松算法对密集点云进行三维曲面重建;最后获得模型的三维尺寸信息。对某建筑工地的沙堆进行了三维尺寸的测量实验,实验结果验证了该方法的有效及可行性,提高了重建能力及精度,同时考虑了目标实际测量误差与重建误差,能够满足实际智能测量的应用需求。     

Effects of off-focal radiation on dimensional measurements in industrial cone-beam micro-focus X-ray computed tomography systems

A study of the secondary source phenomenon due to the presence of off-focal radiation in industrial micro-focus cone-beam X-ray computed tomography (XCT) systems and its influence on dimensional measurements is presented. Although off-focal radiation production within X-ray tubes has been studied for medical X-ray imaging systems, its properties and its effects on dimensional measurements in industrial XCT systems have not been discussed prior to this research. The study comprises: evaluation of the geometrical properties of off-focal radiation through a theoretical and experimental study of two-dimensional projection images of the scanned objects, verification of these properties using computer simulations and evaluation of the impact of the secondary source on dimensional measurements using experimental and simulation approaches. In addition, ways to minimise the effects of off-focal radiation are discussed, and reference samples for characterising the properties of off-focal radiation are proposed.     

基于混合远景和近景区域暗通道算法的图像去雾研究

为了提高图像去雾效果,提出混合远景和近景区域暗通道算法。首先建立远景和近景区域暗通道,为近景区域最小值通道和远景区域最小值通道之和,不同区域设置不同的调节系数;接着估计大气光值,通过混合暗通道远景区域的前50个像素点颜色值的平均值获得,增设校正系数;然后导向滤波,采用自适应滑动窗口优化透射率;最后给出了算法流程。实验仿真显示所提算法去雾图像视觉效果较好,定量分析指标对比度、可见边对比度值较优。     

烟道流量计量标准装置

为了解决我国烟道流量计的量值溯源问题,中国计量科学研究院建立了烟道流量计量标准装置。装置使用可溯源至标准转盘的激光多普勒测速仪作为原级标准器,采用激光多普勒流速剖面扫描和超声流量计波动修正的方式测量标准流量,经校准的8声道超声流量计为工作级标准表,具备了908~104840m3/h的测量能力,扩展不确定度为0.62%(k=2),可对最大口径为1m的流量计进行校准。装置下游测试段包括圆形管段和矩形管段,能够开展烟道流量计测量性能的研究。     

室内照明统一眩光值(UGR)校准装置的研制

统一眩光值UGR是表征室内照明眩光程度高低和视觉舒适度的重要参数,在室内照明检测和照明设计中有着广泛应用。目前国内对于眩光测试仪的溯源方法一般只采用光亮度标准装置校准亮度值,而对于照明光源的亮度分布和几何位置信息都没有进行相关校准,造成眩光测量结果的失准和不统一。针对此问题,本文研制了一套统一眩光值UGR校准装置,介绍了装置原理和结构,并对其不确定度进行分析。该装置的研制对于保障眩光测量结果的准确统一,有效提升照明设计质量,保护视觉健康有着重要作用。     

人造板中甲醛释放量的测定及不确定度评估

采用GB/T 17657-2013《人造板及饰面人造板理化性能试验方法》中的干燥器法,对卫浴家具中人造板甲醛释放量的检测过程进行试验研究,并依据JJF 1059.1-2012《测量不确定度评定与表示》分析影响甲醛释放量测定的各种不确定因素,量化和评定各不确定度分量。结果表明:甲醛释放量为(1.06±0.05)mg·L^-1,扩展不确定度的包含因子k＝2,其置信概率P=95％。经分析,由标准物质认定值和样品的重复测定引入的不确定度最大,其次为标准曲线拟合的变动性所引入的不确定度。     

Multisensor data fusion via Gaussian process models for dimensional and geometric verification

An increasing amount of commercial measurement instruments implementing a wide range of measurement technologies is rapidly becoming available for dimensional and geometric verification. Multiple solutions are often acquired within the shop-floor with the aim of providing alternatives to cover a wider array of measurement needs, thus overcoming the limitations of individual instruments and technologies.In such scenarios, multisensor data fusion aims at going one step further by seeking original and different ways to analyze and combine multiple measurement datasets taken from the same measurand, in order to produce synergistic effects and ultimately obtain overall better measurement results.In this work an original approach to multisensor data fusion is presented, based on the development of Gaussian process models (the technique also known as kriging), starting from point sets acquired from multiple instruments. The approach is illustrated and validated through the application to a simulated test case and two real-life industrial metrology scenarios involving structured light scanners and coordinate measurement machines.The results show that not only the proposed approach allows for obtaining final measurement results whose metrological quality transcends that of the original single-sensor datasets, but also it allows to better characterize metrological performance and potential sources of measurement error originated from within each individual sensor.     

基于约瑟夫森量子电压的交流功率测量系统及方法研究

基于约瑟夫森量子电压标准设计了交流功率差分测量系统。通过分析差分采样系统的误差分布及误差传递函数,提出换向差分测量方法,减小了差分采样系统的增益误差,提高了电压幅值测量准确度;通过分析衰减系数η,证明了采用换向差分测量较容易实现10-7量级电压幅值测量。通过评估差分采样系统零相位,结果证明了差分采样系统具有较好的相位测量稳定性。分析了交流功率差分测量系统的不确定度分量,评估了功率因数为1.0,0.5 L和0.5 C时的功率测量不确定度,通过与国家交流功率基准装置进行实验比对,证明了基于约瑟夫森量子电压交流功率测量系统不确定度评估的合理性。