The microstructure and magnetic properties of Ca2+ ion doped GdCrO3

In this paper, the crystal structure, vacancy defect, local electron density and magnetic properties of Gd_1-xCa_xCrO₃ (0 ≤ x ≤ 0.3) polycrystalline samples were investigated systematically. The crystal structural analyses show that all the samples are orthorhombic phase and a structural distortion happens around x = 0.3. Due to the formation of Cr⁴⁺ ions, both the lattice constant and the Cr–O bond length decrease. The results of positron annihilation spectrum reveals that the vacancy defect concentration increases and the local electron structure changes with the introduction of Ca²⁺ ions. The field-cooled (FC) and zero-field cooled (ZFC) curves of Gd_1-xCa_xCrO₃ samples measured under H = 100 Oe exhibits negative magnetization characteristics due to the interaction between Gd³⁺ and Cr³⁺ ions, and the magnetism can be affected by the structural distortion.     

The effects of hydrogen-induced lattice distortion and Nb-D formation on its permeation through niobium

Abnormal permeation behavior of hydrogen through niobium has been investigated in this paper, i.e. the permeation flux saturated with long-term decrease after reaching a maximum. The diffusivity and permeability have been deduced from the decay edge of permeation transient. Three kinds of polycrystalline niobium foils with different annealing temperature have been compared, to verify the effect of defects and grain properties on the permeability and diffusivity. In the temperature range of (773–1023) K, the heat treatment along with the permeation cycles could either reduce or increase the permeability and diffusivity depending sensitively on temperature and showing a temperature threshold around 950 K. The permeation flux is proportional to square root of pressure, revealing that the abnormal permeation was still bulk diffusion-limited. The diffusivity gradually decreased with permeation cycles, and became more and more sensitive to pressure. The niobium foil expanded macroscopically along the gradient of hydrogen concentration, which reveals the strong and unrecoverable lattice distortion in this temperature and pressure range. The X-ray diffraction studies showed that splitting of all the Nb peaks and shifting of Nb-D peaks along with hydrogen loadings. The phase transition was expected to eliminate the lattice strain during hydrogen loading and which in turn acted as a diffusion barrier.     

数控多轴正逆向制造实训基地建设探索

本文阐述了多轴正逆向制造发展趋势,基地建设的必要性,以五轴加工中心、五轴仿真模拟面板、三维扫描仪、3D打印机等为主的加工、逆向、快速成形先进前沿设备,形成多元化的先进制造实习链,满足、丰富实训内容,提升学生社会就业竞争力。     

Features of crystal structures and thermo-mechanical properties of weberites RE3NbO7 (RE=La,Nd, Sm,Eu, Gd) ceramics

The features of crystal structures, thermo-mechanical properties and their dominant mechanisms of weberites RE₃NbO₇ were studied as high-temperature oxides. We concentrated on connections between structures and thermo-mechanical properties, the influences of bond lengths, lattice distortion degrees and microstructures on these properties were estimated. The shortening of bond length and increment of bonding strength would lead to the increase of mechanical properties. The Vickers hardness (4.5-7.8 GPa) and toughness (0.5-1.6 MPa·m^1/2) of weberites RE₃NbO₇ are enhanced by grain refinement and increment of bond strength, while crystal structures, bond lengths, and lattice distortion degrees influenced their Young's modulus (100-170 GPa). Nano-indentation was applied to test the influence of microstructures on modulus and hardness. The dominant mechanisms for mechanical properties and thermal conductivity were proposed, which was conducive to properties tailoring and engineering applications of weberites RE₃NbO₇ oxides.     

Phase-change regulation criterion based on size-dependent lattice distortion rate and born theory for VO2 nanomaterials

Vanadium dioxide (VO₂) is a promising thermally induced phase transition material because of the abrupt changes in electrical and optical properties. However, the high phase transition temperature of VO₂ and its unspecified modulation relationship need to be resolved urgently. Herein, we proposed a simple and precise regulation criterion for VO₂ materials based on size-dependent lattice distortion rate and Born theory. The results indicated that the application of a tensile stress changed the elastic properties of the VO₂, which promoted VO₂ phase transition, and regulated the phase transition temperature. Moreover, the specific modulation relationship between the stress and phase transition temperature of VO₂ was confirmed experimentally. These results show that our criterion provides theoretical guidance to regulate VO₂ thermally induced phase transition materials.     

基于多视图立体视觉的沙堆三维尺寸测量研究

利用从运动中恢复结构方法(SFM),提出了一种基于多视图立体视觉的沙堆三维重建及三维尺寸测量方法。首先根据SFM方法的求解不稳定特点,结合光束平差法对SFM求解过程进行分析及优化;其次针对SFM重建结果为稀疏点云的问题,利用基于面片的稠密重建算法重新生成稠密的三维点云,再利用泊松算法对密集点云进行三维曲面重建;最后获得模型的三维尺寸信息。对某建筑工地的沙堆进行了三维尺寸的测量实验,实验结果验证了该方法的有效及可行性,提高了重建能力及精度,同时考虑了目标实际测量误差与重建误差,能够满足实际智能测量的应用需求。     

Fabrication and Characterization of Highly Oriented Composite Nanofibers with Excellent Mechanical Strength and Thermal Stability

Here, highly‐oriented poly(m‐phenylene isophthalamide)/polyacrylonitrile multi‐walled carbon nanotube (PMIA/PAN‐MWCNT) composite nanofiber membranes with excellent mechanical strength and thermal stability are successfully produced using electrospinning. It is demonstrated that the cooperation of multi‐walled carbon nanotubes (MWCNT) and high‐speed rotating collection is beneficial to the acquisition of highly oriented fibers and effectively improves the mechanical strength of the membrane along the orientation direction. Specifically, the tensile stress of poly(m‐phenylene isophthalamide)/polyacrylonitrile (PMIA/PAN) membrane is enhanced significantly from 10.6 to 20.7 MPa, benefiting from the highly oriented alignment of the fibers as well as the reinforcing effect of MWCNTs on the fibers. Furthermore, the stressing process of single fiber and fiber aggregates is carefully simulated, and the influence of MWCNTs on the mechanical properties of PMIA/PAN‐MWCNT membranes is analyzed comprehensively, providing a meaningful auxiliary means for the study of mechanical properties. In addition, the composite nanofiber membrane has the advantages of both PMIA and PAN, possessing high temperature resistance, flame‐retardancy, and chemical stability, for an ideal high‐temperature material. In short, the as‐prepared PMIA/PAN‐MWCNT composite membrane with excellent comprehensive property emerges a promising application in many fields, especially in high‐tech.     

航天用多弧段封头淬火装置优化设计

提出了某航天产品用多弧段封头产品的淬火处理方法;通过有限元分析,得出了多弧段封头在底部约束情况下的热处理畸变趋势;建立了多弧段封头淬火装置的三维模型,介绍了多弧段封头淬火装置的基本结构。通过有限元分析得出在淬火装置约束下,多弧段封头热处理,总畸变量为16.0 mm,Z向15.0 mm,X向8.5 mm。通过对多弧段封头淬火装置的热畸变情况分析,提出了淬火装置的优化设计方案,优化后的多弧段封头的热处理,总畸变量为7.0 mm,Z向10.0 mm,X向3.0 mm。解决了多弧段封头热处理畸变过大问题,并通过生产验证。