农村综合能源系统多层协同优化运行方法

农村综合能源系统通过多种能源的协同互补,在满足农村用户多元化用能需求的同时,能有效提升能源利用效率和用能经济性。首先,在考虑适应农村典型场景的基础上,提出了一种三层协同自律的农村综合能源分层协同运行优化框架。然后,基于农村综合能源系统典型设备,建立了三层农村综合能源系统源-储-荷联合优化调度模型以及相应的优化调度流程。调度模型中冬季通过对沼气发电机组的余热回收与空气源热泵协同对用户供热;夏季对沼气发电机组余热进行回收,并通过溴化锂制冷机与空气源热泵联合对农村用户供冷。最后,对农村综合能源系统多层协同优化方法进行了算例分析,结果表明该优化方法提高了农村居民用能的经济性,验证了所提方法的有效性。     

基于LP与小波包的复杂机电系统监测序列混沌降噪方法

针对流程工业生产系统监测数据存在强噪声和混沌性的特点,提出了一种局部投影方法(Local Projection Method)与小波包方法相结合的信号降噪方法。该方法先利用局部投影方法从动力学系统嵌入流形的角度进行多次迭代降噪,并根据关联维数来判定迭代终止;再利用小波包方法从频率的角度进行降噪,抑制高频噪声的干扰,取得了较好的降噪效果。用Lorenz时间序列进行仿真验证,对仿真时间序列加入不同程度的噪声,对比分析小波包、局部投影与该方法降噪后的相空间、SNR值和最大Lyapunov指数,证明了该方法对于中高强度噪声具有更好的降噪效果。并将该方法用于某压缩机组的实际监测数据降噪,评估三种方法的降噪效果,进一步验证了该方法的优越性。     

面向噪声丢包感知的无线网络拥塞算法

针对无线网络链路干扰大、误码率高等特点，以及TCP Westwood算法（TCPW）存在估算带宽时过度依赖包的反馈，缺乏区分传输过程中丢包类型的缺点等问题，提出一种TCPW拥塞控制优化算法--TCPW-F。该算法利用发送速率等构建拥塞因子[F]作为判断丢包类型的依据，同时对判定发生噪声丢包时的拥塞窗口进一步调整，避免噪声丢包引起的窗口下降，提高该情况下窗口的发送效率。仿真结果表明，TCPW-F算法在时延性能方面表现更优，单位时间抖动趋于稳定的速度更快。在同一信道带宽下增大包生成速率，改进算法的实时吞吐量明显高于原算法，具备一定的噪声丢包感知能力，无线网络的TCP传输质量获得较大改善。     

Packet loss detection in networked control systems

One of the main issues related to the reliable operation of network control systems concerns the design of mechanisms able to detect anomalies in the functioning of the communication network through which the control loops are closed. In this article, we address the problem of detecting the occurrence of packet losses and design a mechanism that can detect the occurrence of packet losses directly from process sensor data. Specifically, we propose a moving‐horizon estimation scheme that permits to detect if the packet‐loss rate exceeds prescribed thresholds, which are representative of stability and performance of the control system. We discuss theoretical properties of the proposed solution along with an approximation scheme with reduced computational burden. A numerical example is discussed to substantiate the analysis.     

Airline planning and scheduling: Models and solution methodologies

The airline industry is a representative industry with high cost and low profitability. Therefore, airlines should carefully plan their schedules to ensure that overall profit is maximized. We review the literature on airline planning and scheduling and focus on mathematical formulations and solution methodologies. Our research framework is anchored on three major problems in the airline scheduling, namely, fleet assignment, aircraft routing, and crew scheduling. General formulation, widely used solution approaches, and important extensions are presented for each problem and integrated problems. We conclude the review by identifying promising areas for further research.     

Selection of risk response actions with consideration of secondary risks

Secondary risk in project risk management refers to the risk that arises as a direct result of implementing a risk response action (RRA). It is important for project managers (PMs) to consider the effects caused by the secondary risks in the process of RRA selection. The purpose of this paper is to propose an optimization method to address the problem of selecting risk response actions (RRAs) with consideration of secondary risk which is seldom considered in the existing studies. The optimization model aims to minimize the total risk costs with time constraint being placed on the project makespan. By solving the model, an optimal set of RRAs along with the earliest start time for each activity can both be obtained. The results show that secondary risk plays an important role in the process of RRA selection. Project managers should allocate more budget for responding the project risk when the secondary risk is considered, and consider all factors relating to both time and cost so as to select appropriate RRAs to mitigate primary risk and secondary risk.     

小型特种精细化工过程自动化和信息化研究发展趋势探讨

针对采取小批量间歇性批次生产方式、工艺介质腐蚀性强、危险性大的小型特种精细化工生产工艺研究试验过程自动化、信息化程度不高，导致工艺研究试验中获取数据较少、过程机理研究不够透彻、人工操作多、安全风险高、研究试验消耗大及效率不高等问题，综述了期待通过智能控制、在线分析、模拟仿真和虚拟制造、工况监测及预测性维护以及信息管理和生产调度等关键技术的研究和应用，提高小型特种精细化工生产工艺过程的自动化和信息化程度，实现小型特种精细化工生产工艺过程的数字化、虚拟化和智能化，降低生产安全风险和试验消耗，提高小型特种精细化工生产工艺研究试验的成功率和效率，达到小型特种精细化工生产工艺过程的数字化设计和精准生产的目标。     

Genetic algorithm to simultaneously optimise stope sequencing and equipment dispatching in underground short-term mine planning under time uncertainty

ABSTRACT

The main issue in short-term planning optimisation for underground mining is organising the mining process with limited resources in the form of equipment and materials to satisfy production targets and stable feed grade requirements. In this paper, an integrated optimisation model is proposed based on an individual generation algorithm and an improved Genetic Algorithm to simultaneously optimise stope extraction sequencing and timing, extracted ore grade and equipment dispatching. The model objectives are to shorten the time gap between the stope mining processes and the overall working time. When the uncertainty of equipment working time is taken into account in a short-term scheduling model, the Monte Carlo simulation is applied to evaluate the risk of not meeting the production target. A modification strategy is defined to evaluate equipment failure. Consequently, any available equipment is automatically reassigned to the mining site to replace the broken-down equipment. A case study is used to validate the model in the Sanshandao gold mine of China to formulate an optimal monthly schedule. Compared with the conventional approach, the new model could reduce the variance of ore tonnage and feed grade and improve the equipment allocation efficiency. Discussions are presented to address the uncertainty.     

利用调度优化模型研究原油调合方案的可行性

针对某沿海炼油企业拟投用原油调合系统以稳定混炼原油的性质,设计方案要求将部分码头罐的操作模式由混储改为单储的情况,采用约束规划与数学规划复合建模,实现了码头至厂区大容积长输线模拟,建立了该企业的原油调度优化模型并研究了设计方案的可行性。针对240h调度周期、10种可加工原油、3艘到港油轮的复杂工况进行了优化计算。结果表明:该设计方案具备可行性,且油轮仍可实现到港即卸油,蒸馏装置混炼油种也可长时间保持稳定;模型的优化计算时间较短(小于15min),且对长输线收付及存油情况模拟准确,复合建模方法满足工业应用要求。     

Integrated multi-factory production and distribution scheduling applying vehicle routing approach

This paper introduces a new integrated multi-factory production and distribution scheduling problem in supply chain management. This supply chain consists of a number of factories joined together in a network configuration. The factories produce intermediate or finished products and supply them to other factories or to end customers that are distributed in various geographical zones. The problem consists of finding a production schedule together with a vehicle routing solution simultaneously to minimise the sum of tardiness cost and transportation cost. A mixed-integer programming model is developed to tackle the small-sized problems using CPLEX, optimally. Due to the NP-hardness, to deal with medium- and large-sized instances, this paper develops a novel Improved Imperialist Competitive Algorithm (IICA) employing a local search based on simulated annealing algorithm. Performance of the proposed IICA is compared with the optimal solution and also with four variants of population-based metaheuristics: Imperialist Competitive Algorithm, Genetic Algorithm, Particle Swarm Optimisation (PSO), and Improved PSO. Based on the computational results, it is statistically shown that quality of the IICA’s solutions is the same as optimal ones solving small problems. It also outperforms other algorithms in finding near-optimal solutions dealing with medium and large instances in a reasonably short running time.