α钛富氧层增厚动力学模型

为了实现在工业化生产中对α钛富氧层厚度预测和控制,通过实验研究α钛富氧层在高温空气环境中的形成及增厚过程,讨论热处理温度和时间的影响作用,建立高温(750~850℃)空气环境下关于温度、时间的富氧层增厚动力学模型。结果表明:当恒温热处理温度为750~850℃时,α钛富氧层厚度x与保温时间t0.5呈正比例关系,且升高热处理温度可显著提高富氧层增厚速度。在此温度范围内,氧原子的扩散激活能约为203473 J/mol,计算曲线与实验数据吻合性较好。结合文献中已有的扩散系数方程和实验测得的富氧层厚度数据,推导得到5个富氧层增厚动力学方程,其中3个方程的计算曲线与实验数据吻合性较好,可为实际生产中预估富氧层厚度提供理论支持。     

A Polyallylamine Anchored Amine‐Rich Laser‐Ablated Graphene Platform for Facile and Highly Selective Electrochemical IgG Biomarker Detection

Current immunosensors have an insufficient number of binding sites for the recognition of biomolecules, which leads to false positive or negative results. In this research, a facile, cost‐effective, disposable, and highly selective electrochemical immunosensing platform is developed based on cationic polyelectrolyte polyallylamine (PAAMI) anchored laser‐ablated graphene (LAG). Here, for the first time, PAAMI is introduced to stabilize LAG flakes, while retaining the intrinsic thermal and electronic properties of the substrate by noncovalent π–π interaction and electrostatic physical absorption. The sensing platform offers a suitable number of anchoring sites for the immobilized antibodies by providing ? NH₂ functional groups. The proper grafting of PAAMI is confirmed through X‐ray photoelectron spectroscopy and Raman spectroscopy. The immunosensing platform is applied to detect immunoglobulin (IgG) biomarkers as a proof of concept. Under optimized conditions, the sensing platform exhibits a linear range of 0.012–15 and 15–352 ng mL^?1 with a limit of detection of 6 pg mL^?1 for IgG detection with high selectivity. Based on the analysis, the developed immunosensing platform can be used for point‐of‐care detection of IgG in clinical diagnostic centers. Furthermore, the developed strategy is well suited for the detection of other cancer biomarkers after immobilizing the relevant antibodies.     

某带钢连续热浸镀机组卧式连续退火炉水冷炉辊的开裂原因

采用宏观和微观形貌观察、化学成分分析、显微组织观察、硬度测试等方法,对某带钢连续热浸镀机组卧式连续退火炉水冷炉辊的开裂原因进行了分析。结果表明:水冷炉辊辊套成分中不含铌元素,镍元素含量偏低,导致组织中形成网状富铬碳化物析出相;辊套内腔结垢、水冷不畅使水冷炉辊产生局部过热,导致工作侧辊套基体中粒状合金碳化物的析出和网状富铬碳化物的长大,使工作侧辊套的脆性增加;随着结垢的沉积,水冷炉辊出现轴承转动不畅,甚至堵转现象;在热应力、扭力作用下,裂纹在网状富铬碳化物析出相中形成并沿网状碳化物逐渐向基体内扩展,最终导致水冷炉辊的开裂。     

白云鄂博矿区富钾板岩中稀土铌矿物特征研究*

采用主要化学成分分析、自动矿物分析系统、偏反光显微镜、场发射扫描电镜、能谱仪等手段对白云鄂博矿区内富钾板岩化学成分、矿物组成以及稀土铌矿物特征等方面进行研究。结果显示，白云鄂博矿区内富钾板岩K2O含量高达13.15%，高SiO2富Al2O3，岩石主要由微斜长石与黑云母组成；富钾板岩中REO与Nb2O5含量分别为0.076%、0.012%，稀土、铌矿物含量低且粒度细小，形态产状多种多样，矿物共生组合与接触关系复杂，指示富钾板岩遭受了后期热液的蚀变改造作用。     

The microstructure evolution and mechanical properties of MgO-C refractories with recycling Si/SiC solid waste from photovoltaic industry

In the present work, the recycling of Si/SiC solid waste from photovoltaic industry for MgO-C refractories preparation has been introduced. The influence of solid waste powders as antioxidant additive on microstructure evolution, mechanical properties and thermal shock resistance of MgO-C refractories has been investigated systematically. With 4?wt% Si/SiC rich solid waste addition, the MgO-C refractories exhibited the highest strength (4.39?MPa) and residual Young's modulus (7.86?GPa) after firing at 1400?°C, compared to only Si or SiC-addition. The presence of iron in the solid waste also promoted the formation of MgO and Mg₂SiO₄ whiskers via catalyst-assisted method. Moreover, a dissolution-saturation-precipitation growth mechanism was used to explain the formation process of the whiskers. The improvements in strength as well as thermal shock resistance can be attributed to the microstructural evolution.     

Optimization of C/TiCx duplex diffusion barrier coatings for SiCf/Ti composites based on interfacial structure evolution exploration

Introducing a carbon single coating is a popular method used to protect SiC_f/Ti composites from severe interface reactions. However, carbon coatings lose their protective effect on SiC fibres at high temperature, even after a short period time. As such, given the strong demand for high temperature applications in aeronautics and astronautics a more coating which is more effective at high temperatures is desirable. In order to improve the high temperature interfacial stability of SiC_f/Ti composites, a C/TiC_x duplex coating system with different C contents in TiC_x was introduced to explore the protection of fibres at 1200?°C for 1?h. The results show that the C/quasi-stoichiometric TiC coating system protects the SiC fibres most effectively. Based on insights from the evolution of the interface structure, TiC_x has been identified as an interfacial reaction product from the C single coating, exhibiting a gradient in C content and grain size, which is different from a deposited TiC layer with a well-distributed composition and structure. The different coating structure gives rise to different ability to resist C diffusion at high temperatures, in which poor resistance ability appears in TiC_x interfacial reaction layer coming from C single coating due to short-circuit diffusion in C-rich fine-grained TiC layer and fast intracrystalline diffusion trigged by amounts of vacancies in sub-stoichiometric coarse-grained TiC layer. Therefore, C/quasi-stoichiometric TiC duplex coatings with a thick, coarse-grained quasi-stoichiometric TiC layer could effectively inhibit C diffusion by comparison to C single coatings, and is more effective than C/rich-carbon TiC duplex coatings due to the existence of short-circuit diffusion in the latter. As such, C/quasi-stoichiometric TiC duplex coatings appear to be an optimal diffusion barrier for SiC_f/Ti composites at high temperature.     

矿井顶板水探测方法及富水区成因分析

某矿1303工作面为三采区首采工作面，顶板含水层主要为第四系含水层、K₁₀和K₈砂岩裂隙含水层。为了解顶板K₁₀和K₈砂岩裂隙含水层的富水性，在1303工作面运输巷布置了覆盖全工作面的10个钻场（46个顶板探放水钻孔）进行探测，结合地表钻孔的顶板覆岩规律以及抽水试验结果可知，K₁₀和K₈砂岩裂隙含水层属于弱富水含水层，在2号钻场和8号钻场周边局部存在局部富水区；局部富水区均与构造有关，2号钻场位于背斜翼部，8号钻场位于向斜轴部，而背斜翼部和向斜轴部易出现砂岩裂隙带，成为地下水的富集区。     

底板带压开采工作面并行电透视探测技术应用研究

汾西矿务局水峪矿部分工作面现已面临带压开采问题，受下伏奥陶系灰岩水害影响，工作面安全回采过程中的防治水工作难度增加，尤其是带压开采工作面底板灰岩水的有效探测变得异常紧迫与重要。为了解决底板带压开采工作面富水区的探测问题，水峪矿引入了并行电透视技术，并对相应工作面进行了探测应用。并行电透视技术相对于传统音频电透视技术具有仪器智能化控制发射接收切换、一发射点并行对应多接收点、仪器智能快速高效跑极施工的3项技术优势，可体现应用现场施工高效、实际探测效果可靠的技术特点。经过对并行电透视技术及探测应用效果分析研究，证明该方法技术领先，现场施工高效，实际探测结果可靠，实用性强。