Preparation of Y2O3：Eu^3＋ phosphor by molten salt assisted method

A kind of fine and quasi-spherical Y2O3：Eu^3＋ phosphor was prepared by firing a preparative precursor at 1 200 ℃ for 2 h with the molten salts of Na2CO3, S and NaCl. The precursor was obtained by homogeneous precipitation of yttrium and europium with oxalic acid when using EDTA, citric acid or starch as complexant. The structure and morphology of the phosphors were characterized by XRD and SEM, respectively. The influence of complexing environment, firing temperature and molten salts on formation of the phosphor Y2O3：Eu^3＋ was discussed. The result show that the prepared Y2O3：Eu^3＋ phosphor is of quasi-spherical structure with size of 2-3 μm. Its luminescent intensity is 30% higher than that of the same phosphor prepared by the same procedure but without molten salts, and is 5% higher than that of commercial Y2O3：Eu^3＋ red phosphor.     

烟丝组分的吸湿模型研究

为了研究烟丝主要组分的吸湿平衡规律,用GAB模型获得的叶丝、梗丝、膨胀烟丝在25℃环境下,在45%～75%平衡相对湿度范围内的吸湿平衡,得到优异的拟合精度.结果表明,用GAB吸湿模型计算的叶丝、梗丝、膨胀烟丝的单层含水率（干基）分别为6.14%,7.04%,5.92%.以水活度0.65为安全贮存的临界点,对应于吸湿过程,用GAB模型估计25℃时叶丝、梗丝、膨胀烟丝的安全含水率（干基）分别为16.69%,18.30%,15.00%.研究结果为各组分加工过程各阶段的含水率设计提供了参考.     

三相电机断相、过载、相序保护器设计

介绍了三相电机的断相、过载和相序保护电路，并详细阐述了其工作原理。     

UT-2000操作控制系统在镜泊湖地下电站中的应用

介绍了UT-2000操作控制系统的配置、功能、主要技术特点及在镜泊湖地下电站4台机组控制系统中的应用与运行效果。     

CFRP钢管混凝土核心轴压短柱静力性能研究

目的为了解CFRP钢管混凝土核心轴压短柱的各组成部分协同工作，内力重分布．应力-应变关系以及承载力简化计算等问题．方法以试验研究为基础，对研究对象进行理论分析．结果试件在受力过程中存在内力重分布现象：在加载初期，钢管以承受纵向压力为主；在加载后期，钢管和CFRP筒以承受环向拉力为主，给出了此类构件的应力-应变关系曲线以及承载力计算表达式、结论在达到最大承载力之前。钢管。主筋和外围混凝土能够保持协同工作；根据CFRP筒约束效应系数的不同，可以将应力-应变关系曲线划分为若干阶段；计算值与实测值吻合良好且偏于安全．     

大陆漂移模拟演示

大陆漂移模拟演示,动态地将20世纪初期提出的"大陆漂移学说"形象地展示出来,学生通过控制演示进程与对动态画面的观察,直观地了解2亿年来大陆漂移的情况.     

《爱莲说》MTV演示

在中学语文教学中,<爱莲说>作为古诗文名篇,教学时很需要利用声(音情并茂、规范标准的朗读录音)、像(精美贴切、富有感染力的图片)素材及相关文本呈现给我们一种动态、唯美的视听情境,使学生通文路、感其情、晓其心,继而产生一种强烈的学习需求和学习动机.     

Synthesis of Spherical （Y, Gd） BO3 ： Eu^3＋ Phosphor Using W/O Emulsion System

Spherical （Y, Gd）BO3：Eu^3＋ phosphor particles with a narrow size distribution（2 -4 μm） was obtained by firing the Y-Gd-Eu-BO3 precursor prepared in a W/O style emulsion system. In the W/O emulsion system, kerosene, used as oil phase, was mixed with Span 80 and Tween 80 compounds which were employed as the emulsifier with an HLB （hydrophile-lipophile balance） value of 5.2- 5.3. Both rare earths （Y, Gd and Eu） nitrate and boric acid solution or ammonia solution were used as aqueous phase. The synthesis conditions, such as emulsion composition, emulsifying style, precipitation reaction process, reaction temperature, morphology control, and so on, were investigated, and the optimum synthesis conditions for preparing spherical （Y, Gd）BO3：Eu^3＋ phosphor was obtained. The phosphor was characterized by XRD, SEM, laser particle size analysis, emission and excitation spectrum under vacuum ultraviolet （VUV）, and so on. The phosphor synthesized using the water-in-oil emulsion method with median diameter （D50） of 2 - 4 μm shows agreeable photoluminescence （PL） property and sphericity. The main emission peak appears at about 593 nm, which corresponds to ^5D0→^7F1 transition （magnetic-dipole transition） of the Eu^3＋ ion. The cell parameters and powder diffraction data were indexed. The structure of the phosphor belongs to the hexagonal system with space group P63/m.     

河北省南部电网相间距离保护整定存在的问题

介绍了河北南网距离保护整定计算的现状,列出了目前在相间距离保护整定中灵敏性与选择性不能兼顾的几种情况,并阐述了电网对相间距离保护Ⅲ段的特殊要求,提出相间距离保护整定可在保证灵敏度的前提下简化配合关系.